YUDEN000T02 on Pioneer DVD107D

Hi all,

These YUDEN000T02 are the first Blank DVD+R that I tried on my DVR107D and it burn them untill the 100%, when the DVD Recorder goes in standby for some minutes and then Nero gives me a write error.

Alcohol Does something different… it says me that the burn process is done but the DVD is empity of content (i can see that the burn process wrote DVD but when I insert it into DVD reader it is empity of files).

What can I try again ? I tried official 1.22 Firmware version and 1.21 by >NIL

Tnx 1000 :slight_smile:

What are these media really? What brand and rating?

Please post a Nero log!

The brand is Six… I don’t have a nero log, sorry :frowning: I’ve already throw 5 DVD :frowning:

Fake TY? :a

What serial numbers are on the discs?

Regards,
TerminalVeloCD

Incredible, there aren’t serial numbers on these DVDs :expressionless: is this serious ?

I smell fakes, heavily fishy.

Could you do a create disc test with Nero CD DVD Speed or qualityscan/test one of the burned ones?

Seems that my writer doesn’t support simulation whith these DVD+R :expressionless:

Do you mean a simulation ?

No.
Either creat disc with a BLANK one or scanning a already burnt one.

Wich program can I use to scan an already burnt DVD ?

Nero told me Impossible to retrieve TOC informations

the log:



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 17.51.12 
Versione Nero: 6.6.0.0
Masterizzatore:       <PIONEER DVD-RW  DVR-107D>Versione: 1.22 - HA 3 TA 0 - 6.6.0.0
 Driver Adattatore:   <atapi>                   HA 3
 Drive buffer  :      2000kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <HL-DT-ST DVD-ROM GDR8163B>Versione: 0L15 - HA 0 TA 0 - 6.6.0.0
 Driver Adattatore:   <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : HL-DT-ST DVD-ROM GDR8163B        atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : Maxtor 6Y120M0                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : PIONEER DVD-RW  DVR-107D         atapi Port 3 ID 0  DMA: On 
CdRomPeripheral      : HL-DT-ST CD-RW GCE-8400B         atapi Port 3 ID 1  DMA: On 
CdRomPeripheral      : Generic DVD-ROM         1.0   dt347prt Port 4 ID 0  DMA: Off
CdRomPeripheral      : SCSIVAX DVD/CD-ROM      2.7a   Vax347s Port 5 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163   D:   CDRom0
PIONEER DVD-RW  DVR-107D   E:   CDRom1
HL-DT-ST CD-RW GCE-8400B   F:   CDRom2
Generic DVD-ROM            G:   CDRom4
SCSIVAX DVD/CD-ROM         H:   CDRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 510MB (522988kB)
Free physical memory: 220MB (225564kB)
Memory in use       : 56 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

21.10.2005
Scrivi Immagine DVD
21.47.40	#1 Text 0 File Reader.cpp, Line 127
	Reader running
	
21.47.40	#2 Text 0 File Writer.cpp, Line 122
	Writer PIONEER  DVD-RW  DVR-107D running
	
21.47.40	#3 Text 0 File Burncd.cpp, Line 3119
	Turn on Disc-at-once, using DVD media
	
21.47.40	#4 Text 0 File DlgWaitCD.cpp, Line 256
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2263180 (502:55.55, 4420MB)
	
21.47.40	#5 Text 0 File DlgWaitCD.cpp, Line 268
	Write in overburning mode: NO (enabled: CD DVD)
	
21.47.42	#6 Text 0 File DlgWaitCD.cpp, Line 2310
	Recorder: PIONEER DVD-RW  DVR-107D, Media type: DVD+R
	 Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 3
	
21.47.42	#7 Text 0 File DlgWaitCD.cpp, Line 430
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
21.47.42	#8 Text 0 File ThreadedTransferInterface.cpp, Line 844
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Modalità 1, Joliet)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2263181 (2263181) = #2263181/502:55.56
	    not relocatable, disc pos for caching/writing not required/not required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263181 blocks [PIONEER  DVD-RW  DVR-107D]
	--------------------------------------------------------------
	
21.47.42	#9 Text 0 File ThreadedTransferInterface.cpp, Line 1045
	Prepare recorder [PIONEER  DVD-RW  DVR-107D] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4634994688, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
	       0 |  lead-in |   0 |   0x00 |  0x41
	       0 |        1 |   0 |   0x00 |  0x41
	       0 |        1 |   1 |   0x00 |  0x41
	 2263181 | lead-out |   1 |   0x00 |  0x41
	
21.47.42	#10 Phase 24 File dlgbrnst.cpp, Line 1861
	Inizio ottimizzazione file
	
21.47.42	#11 Text 0 File Burncd.cpp, Line 4135
	Cache writing successful.
	
21.47.42	#12 Phase 25 File dlgbrnst.cpp, Line 1861
	Ottimizzazione file completata
	
21.47.42	#13 Phase 28 File dlgbrnst.cpp, Line 1861
	Inizio misurazione velocità 
	
21.47.42	#14 Text 0 File ThreadedTransferInterface.cpp, Line 2471
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
21.49.38	#15 Text 0 File WriterStatus.cpp, Line 116
	<PIONEER  DVD-RW  DVR-107D> start writing Lead-Out at LBA 2263181 (22888Dh), lenght 0 blocks
	
21.49.38	#16 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
21.49.38	#17 Text 0 File dlgbrnst.cpp, Line 1719
	Set remaining time: 0:00,000 (0ms) -> OK
	
21.49.38	#18 Phase 29 File dlgbrnst.cpp, Line 1812
	Misurazione velocità effettuata: 28,6x (39.482 KB/s)
	
21.49.38	#19 Phase 36 File dlgbrnst.cpp, Line 1861
	Inizio scrittura a 4x (5.540 KB/s)
	
21.49.38	#20 Text 0 File ThreadedTransferInterface.cpp, Line 2471
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
21.49.38	#21 Text 0 File Cdrdrv.cpp, Line 8259
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R   (10), Part Version: 1
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26053F h
	 End Sector Number in Layer 0:                 0 h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 3 h
	  Disc Manufacturer ID: YUDEN000
	  Media type ID: T02
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..63]:
	      00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38    ...YUDEN000T02.8
	      23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A    #T7..Nr..c......
	      01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
	
21.49.38	#22 Text 0 File dlgbrnst.cpp, Line 1719
	Set remaining time: 14:09,388 (849388ms) -> OK
	
21.49.38	#23 Text 0 File DVDPlusRW.cpp, Line 628
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
21.49.40	#24 Text 0 File Cdrdrv.cpp, Line 1281
	21:49:40.265 - PIONEER DVD-RW  DVR-107D\H3 T0 : Queue again later
	
21.54.08	#25 Text 0 File Cdrdrv.cpp, Line 1281
	21:54:08.187 - PIONEER DVD-RW  DVR-107D\H3 T0 : Queue again later
	
22.04.14	#26 Text 0 File WriterStatus.cpp, Line 116
	<PIONEER  DVD-RW  DVR-107D> start writing Lead-Out at LBA 2263181 (22888Dh), lenght 0 blocks
	
22.04.15	#27 Text 0 File ThreadedTransfer.cpp, Line 229
	all writers idle, stopping conversion
	
22.14.25	#28 Text 0 File dlgbrnst.cpp, Line 1719
	Set remaining time: 0:00,000 (0ms) -> OK
	
22.14.25	#29 CDR -1122 File ThreadedTransferInterface.cpp, Line 1774
	Impossibile recuperare la TOC
	
22.14.25	#30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1774
	Non posso terminare la scrittura Disc At Once
	
22.15.25	#31 SCSI -1122 File Cdrdrv.cpp, Line 1175
	SCSI Exec, HA 3, TA 0, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x57
	Sense Qual: 0x00
	CDB Data:   0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 
	            0x00 0x00 0x00 0x00 0x57 0x00 
	
22.15.25	#32 Phase 127 File dlgbrnst.cpp, Line 1861
	Generazione limiti DVD alta compatibilità 
	
22.15.25	#33 Text 0 File dlgbrnst.cpp, Line 1719
	Set remaining time: 0:00,000 (0ms) -> OK
	
22.15.25	#34 CDR -1122 File WriterStatus.cpp, Line 171
	Impossibile recuperare la TOC
	
22.15.25	#35 TRANSFER -24 File WriterStatus.cpp, Line 171
	Non posso terminare la scrittura Disc At Once
	
22.15.25	#36 Text 0 File dlgbrnst.cpp, Line 1719
	Set remaining time: 0:00,000 (0ms) -> OK
	
22.15.25	#37 Phase 38 File dlgbrnst.cpp, Line 1861
	Scrittura fallita a 4x (5.540 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 0.28.09 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22.59.44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 


  1. Your media seems to be FAKE (crap).
  2. Your Nero is outdated! Update to 6.6.0.16.
  3. If the TOC cannot be read, the media/content is almost useless. Maybe you could retireve some content using IsoBuster…

Yes, probably I can retrieve the content, but I have a copy of the content on the HD, the problem are supports :frowning: