Yamaha CRW-F1E power calibration error

vbimport

#1

Recently I’ve been getting a power calibration error from Nero version 5.5.10.42 Yamaha

My Burner is a Yamaha CRW-F1E with firmware 1.0d

I’ve been using the same type of media ever since I bought the drive a year and a half ago- Verbatim CD-R 700mb 44x discs. Recently nero has been yelling at me with a Power Calibration Error. So I tried other media like a 44x Memorex 700mb cd-r. That didn’t work either… Then I grabbed a Verbatim 2x-4x CD-RW i’ve had collecting dust for over a year… It works at 4x… so I put a new Verbatim CD-R 700mb 44x CD-R disc and tried to burn it at 4x … same error… Any idea guys? Below are the outputs from both the unsuccessful and the successful burns…

Didn’t work:

ALF

xxxx-xxxx-xxxx-xxxx-xxxx-xxxx*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 11:37:36 PM
Nero Version: 5.5.10.42
Recorder: <YAMAHA CRW-F1E> Version: 1.0d - HA 1 TA 1 - 5.5.10.42
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 0 - 5.5.10.42
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : YAMAHA CRW-F1E atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: ?

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 185MB (190104kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

4.8.2004
CD-ROM (ISO)
9:38:52 PM #1 Text 0 File Isodoc.cpp, Line 7589
Iso document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:38:52 PM #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated

9:38:52 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

9:38:52 PM #4 Text 0 File Writer.cpp, Line 125
Writer YAMAHA CRW-F1E running

9:38:52 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

9:38:52 PM #6 Text 0 File Burncd.cpp, Line 3745
Turn on Disc-At-Once, using CD-R/RW media

9:38:52 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 13028 (13028) = #13028/2:53.53
relocatable, CD pos for caching/writing not required/required, no patch infos

9:38:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 225
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 13027 ( 2:55.52)

9:38:52 PM #9 Text 0 File DlgWaitCD.cpp, Line 230
Write in overburning mode: FALSE

9:38:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 1700
Recorder: YAMAHA CRW-F1E;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

9:38:52 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder YAMAHA CRW-F1E for write in cue-sheet-DAO
DAO infos:

MCN:
TOCTYPE: 0x20 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_RAW_MODE2, 2352/0x0, ISRC “”, FilePos 0 352800 30994656

9:38:52 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 13028 (13028) = #13028/2:53.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 13028 blocks [YAMAHA CRW-F1E ]

9:38:52 PM #13 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

9:38:52 PM #14 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

9:38:52 PM #15 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 44x (6,600 KB/s)

9:38:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

9:38:52 PM #17 Text 0 File Mmc.cpp, Line 13932
StartDAO : CD-Text - Off

9:38:52 PM #18 Text 0 File Mmc.cpp, Line 18419
Set BUFE: supported -> ON , Optimum Writespeed Control : ON

9:38:52 PM #19 Text 0 File Mmc.cpp, Line 14192
CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 02 37 35

9:39:22 PM #20 SCSI -1106 File Cdrdrv.cpp, Line 1443
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x023C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

9:39:22 PM #21 MMC -1106 File Writer.cpp, Line 333
Power calibration error

9:39:22 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

9:39:23 PM #23 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 44x (6,600 KB/s)

9:39:23 PM #24 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File ‘WNASPINT.DLL’: Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/28/2002 6:27:50 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Worked:

ALF

xxxx-xxxx-xxxx-xxxx-xxxx-xxxx*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 11:37:36 PM
Nero Version: 5.5.10.42
Recorder: <YAMAHA CRW-F1E> Version: 1.0d - HA 1 TA 1 - 5.5.10.42
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 0 - 5.5.10.42
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : YAMAHA CRW-F1E atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: ?

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 183MB (188300kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

4.8.2004
CD-ROM (ISO)
9:41:22 PM #1 Text 0 File Isodoc.cpp, Line 7589
Iso document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : ASCII
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:41:22 PM #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated

9:41:22 PM #3 Text 0 File Reader.cpp, Line 115
Reader running

9:41:22 PM #4 Text 0 File Writer.cpp, Line 125
Writer YAMAHA CRW-F1E running

9:41:22 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

9:41:22 PM #6 Text 0 File Burncd.cpp, Line 3745
Turn on Disc-At-Once, using CD-R/RW media

9:41:22 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 13028 (13028) = #13028/2:53.53
relocatable, CD pos for caching/writing not required/required, no patch infos

9:41:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 225
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 13027 ( 2:55.52)

9:41:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 230
Write in overburning mode: FALSE

9:41:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 1700
Recorder: YAMAHA CRW-F1E;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

9:41:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder YAMAHA CRW-F1E for write in cue-sheet-DAO
DAO infos:

MCN:
TOCTYPE: 0x20 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_RAW_MODE2, 2352/0x0, ISRC “”, FilePos 0 352800 30994656

9:41:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 13028 (13028) = #13028/2:53.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 13028 blocks [YAMAHA CRW-F1E ]

9:41:27 PM #13 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

9:41:27 PM #14 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

9:41:27 PM #15 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 2x (300 KB/s)

9:41:27 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

9:41:27 PM #17 Text 0 File Mmc.cpp, Line 13932
StartDAO : CD-Text - Off

9:41:27 PM #18 Text 0 File Mmc.cpp, Line 18419
Set BUFE: supported -> ON , Optimum Writespeed Control : ON

9:41:27 PM #19 Text 0 File Mmc.cpp, Line 14192
CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 02 37 35

9:41:37 PM #20 Text 0 File Writer.cpp, Line 316
21:41:37.593 - YAMAHA CRW-F1E : Queue again later (Intervall : 100msec)

9:44:01 PM #21 Text 0 File WriterStatus.cpp, Line 115
<YAMAHA CRW-F1E > start writing Lead-Out at LBA 13028 (32E4h), lenght 0 blocks

9:45:07 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

9:45:07 PM #23 Phase 37 File dlgbrnst.cpp, Line 1655
Burn process completed successfully at 2x (300 KB/s)

9:45:07 PM #24 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File ‘WNASPINT.DLL’: Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/28/2002 6:27:50 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any ideas? Thanks guys!