Writing error with Nero

Hello guys,

I tried twice to burn a DVD on my labtop and twice it failed nearly to the end. Support used: DVD-R from Octron (don’t know if they are good or if the burner is defect, i never burned before on this notebook)

Here the log, thanks a lot for any help :

dave
flna

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32

NT-SPTI used
Nero Version: 7.2.3.2
Internal Version: 7, 2, 3, 2
(Nero Express)
Recorder: <_NEC DVD±RW ND-6650A> Version: 102C - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD±RW ND-6650A>Version: 102C - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HTS721060G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD±RW ND-6650A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD±RW ND-6650A D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1015MB (1039740kB)
Free physical memory: 131MB (134312kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.7.2006
UDF/ISO compilation
23:59:48 #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started

23:59:48 #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)

23:59:48 #3 Text 0 File Isodoc.cpp, Line 6427
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

23:59:48 #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted

23:59:49 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

23:59:49 #6 Text 0 File Reader.cpp, Line 124
Reader running

23:59:49 #7 Text 0 File Writer.cpp, Line 113
Writer D: _NEC DVD±RW ND-6650A running

23:59:49 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

23:59:49 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

23:59:49 #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media

23:59:49 #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2122703 (471:42.53, 4145MB)

23:59:49 #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

23:59:49 #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD±RW ND-6650A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

23:59:49 #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:59:49 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2122704 (2122704) = #2122704/471:42.54
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2122704 blocks [D: _NEC DVD±RW ND-6650A]
--------------------------------------------------------------

23:59:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: NEC DVD±RW ND-6650A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4347297792, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2122704 | lead-out | 1 | 0x41 | 0x00

23:59:49 #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

23:59:49 #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

23:59:49 #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

23:59:49 #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.

23:59:49 #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

23:59:49 #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11.080 KB/s)

23:59:49 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:59:50 #24 Text 0 File DVDR.cpp, Line 2869
Recording mode: Sequential Recording Mode

23:59:50 #25 Text 0 File DVDR.cpp, Line 3025
Start write address at LBA 0
DVD high compatibility mode: Yes

23:59:50 #26 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

23:59:58 #27 Text 0 File Cdrdrv.cpp, Line 1224
23:59:58.687 - D: _NEC DVD±RW ND-6650A : Queue again later

00:12:57 #28 SPTI -1135 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1F 09 A0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x05a90000: Len x10000
0x00 00 01 BA 44 00 96 B6 FC F9 01 89 C3 F8 00 00
0x01 E0 03 26 81 00 00 C9 46 2D 38 E6 43 E0 BB 51
0x4C A6 60 E9 21 9B 2F A9 B6 1F B1 1F C0 57 64 28

00:12:57 #29 CDR -1135 File Writer.cpp, Line 302
Write error
D: _NEC DVD±RW ND-6650A

00:12:57 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

00:12:58 #31 Text 0 File DVDR.cpp, Line 3265
EndDAO: Last written address was 2034079

00:12:58 #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11.080 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17.08.2001 15:07:32
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25.04.2005 03:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Edit your post & remove the Nero serial no.

Be quick as you’ve only got 30 mins from the original post time to do that.

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Burn slower or use better media.

so actually everything seems ok, except the support?
I burned at 8x, the highest possible speed. Should I reduce to 4x or 2x? If it still not work, i will try another (better) brand of dvd…
thanks!

Assuming that this is a Dell laptop it would be a good idea to update the firmware for the burner. You should be able to find a later version somewhere on Dell’s website or get 1.03c from here .

Wherever you get it from follow the instructions to the letter.

In terms of media Verbatim are always a good bet , especially if you can find 8x +R with Made In Japan on them.

I used 1.03c with the ND-6650A in a Dell Inspiron 6400/E1505 and Nero 7.2.3.0 and it won’t burn reliably at 8x using Verbatim DVD-R (Mitsubishi media code) or Memorex 8x DVD-R (Ritek data code). Both types of media burn and read reliably on a Pioneer DVR-109 on my desktop PC.

It’s either the laptop and/or the laptop burners or a problem with Nero and laptop burners.

Memorex and Ritek is media that should be avoided…

Funny, the 8x Memorex/Ritek DVD-R burned fine at 12x using my Pioneer DVR-109 and Nero 7. The problem appears to be with my Inspiron E1505/6400 and the Philips SDVD-8820/NEC ND-6650A burner, since it can’t read the Verbatim/Mitsubishi 8x DVD-R discs that it burned itself. The Pioneer DVR-109, OTOH, reads those discs just fine.

The point is that you cannot easily compare Pioneer and Nec or other burners…

The NEC burner doesn’t seem to like the Tier 1 Mitsubishi media-code Verbatime 8x DVD-R discs. What super DVD-/+ R do I need?

At this point, I’m about to give up on the laptop burner and continue using the desktop Pioneer burner.

Your system is low on RAM resources. Maybe you could free up some mem and try again, also with recommended media from Verbatim, TY, Maxell, TDK and others.

I’ve already been using Verbatim (Mitsubishi media code) with the NEC and my laptop has 1 GB RAM running XP.

Free physical memory: 131MB (134312kB)
Memory in use : 87 %

Read the log.