Write error

vbimport

#1

Im currently using Nero 8.2.8.0 Micro. This is the first time in using a Micro version of Nero, to avoid the extra stuff I dont want, but every time I use it, im getting a write error, and I cant seem to use those dics later.

How can I fix this?


#3

Ummm…Use legit software not some hacked crap.


#4

Where can I check about the logs? Ive scanned though the Menus and didnt find something like that.

I heard that Nero Micro is basically Nero without the extra software. Does it make a difference?

If it does, then which Nero version should I choose, since I dont want too much extra stuff.


#5

You can chose what to install during the initial installation. Just chose custom installation.


#6

I heard that you cant remove all the extra software, so I went for Micro, all I need is the burning software, so if it possible to remove everything else, ill revert back to the original Nero. And hopefully, that’ll solve the problem.


#7

Yeah, you can basically uncheck everything except the Burning ROM portion if you do a custom install. :slight_smile:

At least the regular Nero should offer you to save an error log if a burn fails :wink:


#8

If you only need to burn use Imgburn, forget nero altogether.


#9

^Hands down agree there.


#10

Downloaded an original Nero and I got a write error again.

Here is the log:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1

Recorder: <TSSTcorp CD/DVDW SH-S182F>Version: SB02 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <TSSTcorp CD/DVDW SH-S182F>Version: SB02 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040L0 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182F IdeChnDr Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182F G: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1021MB (1046320kB)
Free physical memory: 662MB (678356kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.5.2008
CD-ROM (ISO)
10:54:39 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:54:40 AM #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:54:40 AM #3 Text 0 File Burncd.cpp, Line 3238
TSSTcorp CD/DVDW SH-S182F
Super Link activated

10:54:41 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

10:54:42 AM #5 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 0. Length: 287280 -> 287278.

10:54:42 AM #6 Text 0 File Burncd.cpp, Line 3568
Turn on Track-At-Once, using CD-R/RW media

10:54:42 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 287280 -> 287278.

10:54:42 AM #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to 'physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

10:54:42 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 287280 -> 287278.

10:54:42 AM #10 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 287279 ( 63:52.29)

10:54:42 AM #11 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

10:54:42 AM #12 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: TSSTcorp CD/DVDW SH-S182F;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

10:54:42 AM #13 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:54:42 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 287280 (287280) = #287280/63:50.30
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 287278 blocks [G: TSSTcorp CD/DVDW SH-S182F]
--------------------------------------------------------------

10:54:42 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [G: TSSTcorp CD/DVDW SH-S182F] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 588656640, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 287280 | 0 | 0x00
287280 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:54:42 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 287280 -> 287278.

10:54:42 AM #17 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

10:54:42 AM #18 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

10:54:42 AM #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

10:54:42 AM #20 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

10:54:42 AM #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

10:54:42 AM #22 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 24x (3,600 KB/s)

10:54:42 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:54:42 AM #24 Text 0 File MMC.cpp, Line 22530
Set BUFE: Super Link -> ON

10:54:42 AM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

10:55:46 AM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 0F E0 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0a0d2000: Len x10000
0x52 58 4A 71 95 C0 27 7D AB 04 4C D1 D1 35 49 5D
0xB5 BC 5C E1 B8 49 01 AE B5 B4 D8 F0 6D 95 BF 26
0xAD 65 5A 6D D6 95 D6 55 D5 15 AB D2 5B 7B 57 55

10:55:46 AM #27 CDR -1135 File Writer.cpp, Line 306
Write error
G: TSSTcorp CD/DVDW SH-S182F

10:55:46 AM #28 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
G: TSSTcorp CD/DVDW SH-S182F

10:55:46 AM #29 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack

10:55:46 AM #30 Text 0 File MMC.cpp, Line 17306
<TSSTcorpCD/DVDW SH-S182F> start Close Track #2

10:57:16 AM #31 CDR -1195 File WriterStatus.cpp, Line 375
Disc not present - tray closed
G: TSSTcorp CD/DVDW SH-S182F

10:57:16 AM #32 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation

10:57:16 AM #33 Text 0 File WriterStatus.cpp, Line 384
falling back to disc fixation

10:57:16 AM #34 Text 0 File MMC.cpp, Line 17306
<TSSTcorpCD/DVDW SH-S182F> start Close Track #2

10:57:17 AM #35 SPTI -1195 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1195)
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x01
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 01

10:57:17 AM #36 CDR -1195 File WriterStatus.cpp, Line 375
Disc not present - tray closed
G: TSSTcorp CD/DVDW SH-S182F

10:57:17 AM #37 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation

10:57:17 AM #38 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 24x (3,600 KB/s)

10:57:18 AM #39 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:57:20 AM #40 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed

10:57:20 AM #41 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#11

What exactly are you trying to burn, what media are you using?


#12

On that attempt I was trying to burn some software setups, but it doesnt matter really, since I cant seem to burn anything (video files, music files. Anything)

Im using CD-Rs from Sony.


#13

After trying out different softwares, I noticed that:

Nero Burning Rom burns less than 10% and shows that error that I posted earlier.

Nero StartSmart burns more than 90% and says Write errorG: tsstcorp/dvdw sh-s182f.

ImgBurn burns upto 75% and just stalls there.

Tried to burn flv files.


#14

What type of blank media are you using?

Do you have an extra burner you could swap out with that one?


#15

Im using CD-Rs from Sony.

And no I dont have a spare burner.


#16

It’s possible your burner is on it’s way out. Do you have a friend that has an external burner you could borrow in an attempt to isolate the problem?

If so, i’d give that a shot.


#17

None of my friends have externals unfortunately, is there any other way to know the problem?


#18

Any idea on whats wrong?


#19

Honestly…it sounds like your burner has given/is giving up the ghost. Thus the recommendation of an alternate burner.


#20

Hmm ill try burning a DVD later, with that, ill know if its the media or my burner.


#21

Let us know if there’s anything else we can do.

I hope your burner’s not toast.