Windows vista Image

vbimport

#1

Hi ,

I must have tried twice in the past I found two different Windows Vista Image files on the web, about 2.5 Gigabytes. I wanted to burn them with Nero (my version = 7.5.7.0, but both failed to complete succesfully. Both failed at the same point. There must be something I am doing wrong.

I get error message “Could not perform end of Disc-at-Once”
I used “Burn Image” in Nero and selected the Dvd image.
I used AFA 8x speed DVD-r
Please assist

thanks
Ralph

Here is the log :

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 오후 1:54:32

NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.5.7.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3300831AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3120022A 8.54 iteatapi Port 4 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM X: CDRom2
HL-DT-ST DVDRAM GSA-4163B Y: CDRom0
HL-DT-ST RW/DVD GCC-4521B Z: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047724kB)
Free physical memory: 421MB (431152kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.2.2007
Burn DVD Image
오후 6:12:44 #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

오후 6:12:45 #2 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media

오후 6:12:45 #3 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1261425 (280:19.00, 2463MB)

오후 6:12:45 #4 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD)

오후 6:12:45 #5 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

오후 6:12:45 #6 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================

오후 6:12:45 #7 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1261426 (1261426) = #1261426/280:19.1
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1261276 blocks [Main]
--------------------------------------------------------------

오후 6:12:45 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2583400448, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1261426 | 1261276 | 0x00
0 | 1 | 1 | 0x41 | 1261426 | 1261276 | 0x00
1261426 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

오후 6:12:49 #9 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

오후 6:12:49 #10 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

오후 6:12:49 #11 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.

오후 6:12:49 #12 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

오후 6:12:49 #13 Phase 32 File dlgbrnst.cpp, Line 1746
Simulation started at 8x (11,080 KB/s)

오후 6:12:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

오후 6:12:49 #15 Text 0 File DVDR.cpp, Line 3026
Recording mode: Sequential Recording Mode for Multisession

오후 6:12:49 #16 Text 0 File DVDR.cpp, Line 3182
Start write address at LBA 0
DVD high compatibility mode: Yes

오후 6:12:49 #17 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

오후 6:15:17 #18 SPTI -1039 File SCSIPassThrough.cpp, Line 293
Y: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 00 00 08 DC 40 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 32 34 00 0C 09 01
Buffer x0607da00: Len x10000
0x00 EB 8E AE BA AA AB 64 E9 59 39 09 44 24 04 25
0x09 39 0A 85 56 70 A6 DC C9 DC C3 54 C2 67 6F C7
0xD1 6F 1B F7 22 6C 4A 9E 28 DE E6 FC 79 87 77 D8

오후 6:15:17 #19 CDR -1039 File Writer.cpp, Line 278
Focus or tracking error
Y: HL-DT-ST DVDRAM GSA-4163B

오후 6:15:17 #20 Text 0 File DVDR.cpp, Line 3402
EndDAO: Last written address was 580671

오후 6:15:17 #21 Phase 133 File dlgbrnst.cpp, Line 1746
Writing short lead-out

오후 6:15:18 #22 SPTI -1176 File SCSIPassThrough.cpp, Line 293
Y: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 5B 01 00 0C 72 04

오후 6:15:18 #23 CDR -1039 File WriterStatus.cpp, Line 161
Focus or tracking error
Y: HL-DT-ST DVDRAM GSA-4163B

오후 6:15:18 #24 TRANSFER -24 File WriterStatus.cpp, Line 161
Could not perform end of Disc-at-once

오후 6:15:19 #25 Phase 34 File dlgbrnst.cpp, Line 1746
Simulation failed at 8x (11,080 KB/s)

오후 6:15:19 #26 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed

오후 6:15:19 #27 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\scsiport.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=90240 bytes, created 2002-08-29 ì˜¤ì „ 1:27:50 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Sorry but you will get no help with illegally distributed software. :cop:

Please read the rules again…