Will Not Play DVD Says In Pal Format

I recently borrowed a DVD from a friend and when I tried to play the movie my DVD player says it cannot play because it is in Pal format.

I used DVDFab V6.2.2 to make a backup copy (removing Region Code and RCE 5) thinking it came from the UK and now it says it has the wrong region.

Tried Again removing RCE 2. Same results.

Info From DVD On Hard Drive:
Disc type: Video DVD
Disc region: 1, 2, 3, 4, 5, 6, 7, 8
Video standard: PAL

CSS (Content Scramble System) protection is not found.
RC (Region Code) protection is not found.
RCE (Region Code Enhancement) protection is not found.
APS (Analog Protection System) protection is not found.
UOPs (User Operation Prohibitions) protection is not found.

Invalid PTTs protection is not found.
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is not found.
Invalid VOBUs protection is not found.
Fake vts protection is not found!
Bad sector protection is not found!
Structure protection (ARccOS, RipGuard, etc.) is not found.

PathPlayer is enabled!
Unplayable cell is not found.

Any suggestions?

[QUOTE=roadking2003;2492108]I recently borrowed a DVD from a friend and when I tried to play the movie my DVD player says it cannot play because it is in Pal format.

I used DVDFab V6.2.2 to make a backup copy (removing Region Code and RCE 5) thinking it came from the UK and now it says it has the wrong region.

Tried Again removing RCE 2. Same results.

Info From DVD On Hard Drive:
Disc type: Video DVD
Disc region: 1, 2, 3, 4, 5, 6, 7, 8
Video standard: PAL

CSS (Content Scramble System) protection is not found.
RC (Region Code) protection is not found.
RCE (Region Code Enhancement) protection is not found.
APS (Analog Protection System) protection is not found.
UOPs (User Operation Prohibitions) protection is not found.

Invalid PTTs protection is not found.
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is not found.
Invalid VOBUs protection is not found.
Fake vts protection is not found!
Bad sector protection is not found!
Structure protection (ARccOS, RipGuard, etc.) is not found.

PathPlayer is enabled!
Unplayable cell is not found.

Any suggestions?[/QUOTE]

Hi roadking2003

DVDFab will not change the format from Pal to NTSC, you can use a program called DVD Flick to convert it…it is freeware :slight_smile:

Thanks for the info.

[QUOTE=StormJumper;2492119]Hi roadking2003

DVDFab will not change the format from Pal to NTSC, you can use a program called DVD Flick to convert it…it is freeware :)[/QUOTE]

Just a question, SJ… will DVD Flick really do the conversion??

Everything I’ve read indicates no… I usually use ConvertXToDVD…

OC

:slight_smile:

Just try it - dvdflick is free…

[QUOTE=OCanada;2492501]Just a question, SJ… will DVD Flick really do the conversion??

Everything I’ve read indicates no… I usually use ConvertXToDVD…

OC

:)[/QUOTE]

Hey Tor

About time you came out of the woodwork :bigsmile:
I have used DVD Flick many times to do this, after you load DVD Flick click on “Project Settings” and on the left side click on “Video” then at the very top there is a setting you can select the format[B]([/B]Target Format[B])[/B] just make sure NTSC is in the dropdown window :wink:

Not bad for freeware :cool:

[QUOTE=StormJumper;2492589]Hey Tor

About time you came out of the woodwork :bigsmile:
I have used DVD Flick many times to do this, after you load DVD Flick click on “Project Settings” and on the left side click on “Video” then at the very top there is a setting you can select the format[B]([/B]Target Format[B])[/B] just make sure NTSC is in the dropdown window :wink:

Not bad for freeware :cool:[/QUOTE]

Hiya, Tim…

Did you get my PM??

OC

:slight_smile:

[QUOTE=roadking2003;2492108]I recently borrowed a DVD from a friend and when I tried to play the movie my DVD player says it cannot play because it is in Pal format.

I used DVDFab V6.2.2 to make a backup copy (removing Region Code and RCE 5) thinking it came from the UK and now it says it has the wrong region.

Tried Again removing RCE 2. Same results.

Info From DVD On Hard Drive:
Disc type: Video DVD
Disc region: 1, 2, 3, 4, 5, 6, 7, 8
Video standard: PAL

CSS (Content Scramble System) protection is not found.
RC (Region Code) protection is not found.
RCE (Region Code Enhancement) protection is not found.
APS (Analog Protection System) protection is not found.
UOPs (User Operation Prohibitions) protection is not found.

Invalid PTTs protection is not found.
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is not found.
Invalid VOBUs protection is not found.
Fake vts protection is not found!
Bad sector protection is not found!
Structure protection (ARccOS, RipGuard, etc.) is not found.

PathPlayer is enabled!
Unplayable cell is not found.

Any suggestions?[/QUOTE]

[U][B]I Think that there is no problem with the CD. The problem is in your DVD PLAYER JUST TRY TO CHANGE YOUR DVD SETTING INTO NTSC/PAL INTO AUTO THAT MY TIPS FOR YOU… :D:D:D[/B][/U]

[QUOTE=asakaloo123;2492600][U][B]I Think that there is no problem with the CD. The problem is in your DVD PLAYER JUST TRY TO CHANGE YOUR DVD SETTING INTO NTSC/PAL INTO AUTO THAT MY TIPS FOR YOU… :D:D:D[/B][/U][/QUOTE] All DVD Players do not have this function

[QUOTE=Jimbo;2492602]All DVD Players do not have this function[/QUOTE]

[B]Sorry I really dont know that all DVD Players are the same. [/B]
[B]because in here Philippines there are so many[/B] DVD PLAYERS w/ USB portable and they are verify that SUPPORTS ALL Regions Or If is NTSC/PAL In Here Philippines Only.
"[U]You Know DVD players in here is so great because if a CD or DVD are damaged It is possible to read[/U] …hehehe!!!:D:D:D:D:D:D

[B][U][I]DONT WORRY ABOUT YOUR PROBLEM SOMEONE WILL HELP YOU… MAYBE NOT TODAY…hehehe[/I]:clap::clap::clap::clap::clap:[/U][/B]

[QUOTE=OCanada;2492598]Hiya, Tim…

[B]Did you get my PM??[/B]

OC

:)[/QUOTE]

Yes Sir

:smiley:

I saw the answer here in the thread about PAL to NTSC Tim using Flick

well thats good … And I"m very Happy For you… well who watch [B][U]avatar?[/U][/B]

[QUOTE=asakaloo123;2492615]well thats good … And I"m very Happy For you… [B]well who watch [B][U]avatar?[/U][/B][/B][/QUOTE]

Your question will take this thread off topic :frowning:

however if you wish to take this to the following thread http://club.myce.com/f116/dvd-fab-products-discussion-thread-210538/
I’m sure it can be discussed :smiley: