Will DVD+R DL 2.4x Burn at 6x?

I have a NEC ND-3540. Will DVD+R DL 2.4x Burn at 6x???

TIA
NBK

If you use the right media.

Thanks for responding,
Will Verbatim 2.4x media do?

TIA
NBK

Yea, and it’s the only 2.4x media that would do.

Or any other media that uses the MKM001 MID code. :cool:
Dynex (Bestbuy) brand DVD+R DL media has used MKM001 in the past…

The NEC ND-3540A can write up to 8x on discs with this MID.

THe Verbatim DVD+R DL 2.4x actually burned at 8x!!!

NBK

Sure, but is the quality also good? Scan it!

Hi

I did a surface scan and all was good.

NBK

No surface scan. A real scan with PIF/POF.

I did a PIF/POF Scan too and it was good.

NBK

Post it please… :smiley:

Hi

Here is the scan…Unfortunately the *.jpeg is too large.

NBK

Save as a .png. CDspeed allows you to.

Hi

Here it is…


^Nono… go to the “Disc Quality” tab. Run the test there.

What does all this mean?

TIA
NBK

General Information
Drive: _NEC DVD_RW ND-3540A
Firmware: 1.03
Disc: DVD+R DL (MKM 001)
Selected speed: 8 X
PI errors
Maximum: 39
Average: 5.13
Total: 56590
PI failures
Maximum: 17
Average: 0.33
Total: 4945
PO failures: n/a
Jitter: n/a
Scanning Statistics
Elapsed time: 14:12
Number of samples: 19919
Average scanning interval: 8.00 ECC
Glitches removed: 0


Score is only 88 but IMO the scan/result looks good for a DL with less than 5gb.

Thanks for posting the results!

Thanks for responding,

How do i improve quality? Lower speed to 4x?

TIA
NBK

Hi

I lowered the burn speed from 8x to 4x and the quality score rose to 94 from 88.

NBK