WH14NS40 failing to write at 1%

vbimport

#1

I’m rather illiterate with dvd burning tools, but as I’ve read through some of the posts here, I’ve taken the advice to use imgburn, update my firmware for the LG burner, and use high quality discs (Verbatim). I’m trying to copy home movies that are transfered from VHS to DVD format through a separate utility (not sure what this behemeth is called). Anyway, I’ve successfully copied 4 or 5 of these discs and the last two I’m working with, keep failing at 1%. I’ve tried copying the data multiple times and began this process using PowerISO. Anyway, I’ll post the log and hopefully someone here can help me decipher what’s going on:


I 14:18:46 ImgBurn Version 2.5.8.0 started!
I 14:18:46 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 14:18:46 Total Physical Memory: 8,343,124 KiB - Available: 4,456,052 KiB
I 14:18:46 Initialising SPTI…
I 14:18:46 Searching for SCSI / ATAPI devices…
I 14:18:46 -> Drive 1 - Info: DTSOFT BDROM 1.05 (J:) (Virtual)
I 14:18:46 -> Drive 2 - Info: HL-DT-ST BD-RE WH14NS40 1.03-A0 (D:) (ATAPI)
I 14:18:46 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (F:) (Unknown)
I 14:18:46 -> Drive 4 - Info: MagicISO Virtual DVD-ROM 1.0A (H:) (Unknown)
I 14:18:46 -> Drive 5 - Info: MagicISO Virtual DVD-ROM 1.0A (I:) (Unknown)
I 14:18:46 -> Drive 6 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown)
I 14:18:46 Found 4 DVD-ROMs, 1 BD-ROM and 1 BD-RE XL!
I 14:20:10 Operation Started!
I 14:20:10 Source File: C:\Users\Joodez\Documents\dvd burning temp\007.iso
I 14:20:10 Source File Sectors: 1,574,432 (MODE1/2048)
I 14:20:10 Source File Size: 3,224,436,736 bytes
I 14:20:10 Source File Volume Identifier: SAMSUNG DVD RECORDER VOLUME
I 14:20:10 Source File Volume Set Identifier: SAMSUNG DVD RECORDER VOLUME SET
I 14:20:10 Source File Implementation Identifier: SAMSUNG DVD RECORDER
I 14:20:10 Source File File System(s): ISO9660, UDF (1.02)
I 14:20:10 Destination Device: [0:1:0] HL-DT-ST BD-RE WH14NS40 1.03 (D:) (ATAPI)
I 14:20:10 Destination Media Type: DVD-R (Disc ID: MCC 03RG20)
I 14:20:10 Destination Media Supported Write Speeds: 8x, 12x, 16x
I 14:20:10 Destination Media Sectors: 2,297,888
I 14:20:10 Write Mode: DVD
I 14:20:10 Write Type: DAO
I 14:20:10 Write Speed: 8x
I 14:20:10 Link Size: Auto
I 14:20:10 Lock Volume: Yes
I 14:20:10 Test Mode: No
I 14:20:10 OPC: No
I 14:20:10 BURN-Proof: Enabled
I 14:20:10 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)
I 14:20:10 Filling Buffer… (80 MiB)
I 14:20:11 Writing LeadIn…
I 14:20:40 Writing Session 1 of 1… (1 Track, LBA: 0 - 1574431)
I 14:20:40 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 1574431)
W 14:23:44 Failed to Write Sectors 2976 - 3007 - Reason: The request could not be performed because of an I/O device error.
W 14:23:44 Retrying (1 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (2 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (3 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (4 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (5 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (6 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (7 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (8 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (9 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (10 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (11 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (12 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (13 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (14 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (15 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (16 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (17 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (18 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (19 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:23:44 Retrying (20 of 20)…
W 14:23:44 Retry Failed - Reason: Invalid Address For Write
W 14:25:40 Retrying (21)…
W 14:25:40 Retry Failed - Reason: Invalid Address For Write
W 14:25:43 Retrying (22)…
W 14:25:44 Retry Failed - Reason: Invalid Address For Write
E 14:25:46 Failed to Write Sectors 2976 - 3007 - Reason: The request could not be performed because of an I/O device error.
E 14:25:46 Next Writable Address: 0
I 14:25:46 Synchronising Cache…
E 14:25:59 Failed to Write Image!
I 14:26:02 Exporting Graph Data…
I 14:26:02 Graph Data File: C:\Users\Joodez\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH14NS40_1.03_FRIDAY-MARCH-18-2016_2-20_PM_MCC_03RG20_8x.ibg
I 14:26:02 Export Successfully Completed!
E 14:26:02 Operation Failed! - Duration: 00:05:49
I 14:26:02 Average Write Rate: 19 KiB/s (0.0x) - Maximum Write Rate: 19 KiB/s (0.0x)


#2

Howdy. :slight_smile:

Did you install or change anything on the computer after doing the first few successful discs?


#3

Right click the drive selection box in ImgBurn and pick ‘family tree’.
Close the prompt that comes up and copy + paste everything from the log window please.

You’re losing the real error from the drive and getting a generic Windows error.


#4

[QUOTE=Albert;2770406]Howdy. :slight_smile:

Did you install or change anything on the computer after doing the first few successful discs?[/QUOTE]

Nope, I was burning the discs back to back.

Right click the drive selection box in ImgBurn and pick ‘family tree’.
Close the prompt that comes up and copy + paste everything from the log window please.

You’re losing the real error from the drive and getting a generic Windows error.

Alright, I closed out of ImgBurn, so I’m going to have to start the process again and grab the new log.


#5

You only need to do exactly what I said, no need to attempt another burn or anything.