Weird problem of SH-S203D after clean re-install of XP Pro SP2

vbimport

#1

[qanda]This thread is about the Samsung SH-S203D / TS-H653D. Click here to see full specs[/qanda]Hi!

I switched back from Vista Business to XP Pro SP2 recently. The XP install is a clean one (from scratch).

Ever since am in XP I notice that DVD Burning was slow never went up above 6~7x speed. Then I realised that the burner is in PIO mode. I don’t know how it went into it but, I selected DMA if Available but, it still remained in PIO mode. So, I un-installed the Secondary Channel and restarted XP and then it switched to UDMA5 mode.

After that I burned to coasters and whenever I start a benchmark in Nero CD DVD Speed the Nero App freezes. You can press buttons but, nothing happens. If you start My Computer Windows will not show you the Drive list. If you have to re-start the PC you have to hard reset.

I then found that after sometime the burner automatically switches back to PIO mode. It seems Nero CD DVD Speed runs properly in PIO mode and the system locks when I try to run it when the burner is in UDMA5 mode.

I don’t seem to know why this is happening as everything was working fine under Vista Business.

My Hardware/Software Confing is as follows:

Windows XP Pro SP2 (with all updates till date)
Nero 7.11.10.0

AMD Athlon64 3200+
ASUS M2N8-VMX Mobo
Transcend 4 GB RAM DDR2-800 in Dual Channel Mode
Samsung SH-S203D SB00
2x Hitachi 160 GB 7200 rpm HDDs

I am using Windows IDE Drivers and not of nVidia. I am not able to understand why this is happening suddenly.

The Nero Logs of 2 coasters I burn’t are as below. Please note that I tried burning this two DVDs when the burner was forced into UDMA5 mode.

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0

Recorder:             <TSSTcorp CDDVDW SH-S203D>Version: SB00 - HA 1 TA 4 - 7.11.10.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default
CD-ROM:               <ELBY     CLONEDRIVE      >Version: 1.4  - HA 1 TA 1 - 7.11.10.0
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Hitachi HDS721616PLAT80          atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : HDT722516DLA380                  atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : TSSTcorp CDDVDW SH-S203D         atapi Port 2 ID 0  DMA: On 
CdRomPeripheral      : ELBY    CLONEDRIVE      1.4     VClone Port 4 ID 0  DMA: Off

=== CDRom-Device-Map ===
ELBY CLONEDRIVE            G:   CdRom1
TSSTcorp CDDVDW SH-S203D   F:   CdRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use       : 20 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

27.8.2008
ISO compilation
1:00 AM    #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
1:00 AM    #2 Text 0 File Isodoc.cpp, Line 6711
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate                : FALSE
    Write                   : TRUE
    Finalize CD             : TRUE
    Multisession            : FALSE
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 2 (Max. of 31 chars)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660 ;1 file extensions        : TRUE
    
1:00 AM    #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
    First writeable address = 0 (0x00000000)
    
1:00 AM    #4 Text 0 File Burncd.cpp, Line 3500
    Turn on Disc-At-Once, using DVD media
    
1:00 AM    #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
    FS Settings: using validator 'CUDFSettingsValidatorDVD'
    ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
    Changing UDF revision from '1.02' to '1.02'
    
1:01 AM    #6 SPTI -1114 File SCSIPassThrough.cpp, Line 181
    CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1114)
    Sense Key:  0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 
    Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 
    Buffer x045f9ec0: Len x20
    
1:01 AM    #7 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media:  2298495 (510:46.45, 4489MB)
    Last address to be written:            2281663 (507:02.13, 4456MB)
    
1:01 AM    #8 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)
    
1:01 AM    #9 Text 0 File DlgWaitCD.cpp, Line 2988
    Recorder: TSSTcorp CDDVDW SH-S203D, Media type: DVD-R
     Disc Manufacturer ID: <MBI 01> <RG40>
     Disc Application Code: 64, Disc Physical Code: 193
    
1:01 AM    #10 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
1:01 AM    #11 Text 0 File ThreadedTransferInterface.cpp, Line 778
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2281664 (2281664) = #2281664/507:2.14
        relocatable, disc pos for caching/writing not required/ required
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2281664 blocks [F: TSSTcorp CDDVDW SH-S203D]
    --------------------------------------------------------------
    
1:01 AM    #12 Text 0 File ThreadedTransferInterface.cpp, Line 979
    Prepare [F: TSSTcorp CDDVDW SH-S203D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4672847872, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   1 |    0x41 |  2281664 |        0 | 0x00
      2281664 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    
1:01 AM    #13 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
    
1:01 AM    #14 Text 0 File Burncd.cpp, Line 4286
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
    
1:01 AM    #15 Phase 24 File dlgbrnst.cpp, Line 1767
    Caching of files started
    
1:01 AM    #16 Text 0 File Burncd.cpp, Line 4405
    Cache writing successful.
    
1:01 AM    #17 Phase 25 File dlgbrnst.cpp, Line 1767
    Caching of files completed
    
1:01 AM    #18 Phase 36 File dlgbrnst.cpp, Line 1767
    Burn process started at 16x (22,160 KB/s)
    
1:01 AM    #19 Text 0 File ThreadedTransferInterface.cpp, Line 2726
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    
1:01 AM    #20 Text 0 File DVDR.cpp, Line 3262
    Recording mode: Sequential Recording Mode
    
1:01 AM    #21 Text 0 File DVDR.cpp, Line 3416
    Start write address at LBA 0
    DVD high compatibility mode: Yes
    
1:01 AM    #22 Text 0 File Cdrdrv.cpp, Line 10161
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
     Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
     Disc Size: 120 mm,      Maximum Transfer Rate: <not specified> (F h)
     Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
     Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
     Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
     Outer Limit of Data Recordable Area:          0 h
     Data in Burst Cutting Area (BCA) does not exist
      Revision number of maximum recording speed: 6.0
      Revision number of minimum recording speed: -
      Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - 
      Class: 0,  Extended part version: 33
      Start PSN of the Extra Border Zone: 0 h
      Start PSN of Physical format information blocks in Extra Border Zone: 0 h
     Media Specific [16..783]:
        00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        01 40 C1 FD 9E D8 52 00 - 02 85 0D 10 88 9A 80 00    .@....R.........
        03 4D 42 49 20 30 31 00 - 04 52 47 34 30 00 00 00    .MBI.01..RG40...
        05 88 80 00 00 00 02 00 - 06 09 0D 13 87 78 80 00    .............x..
        07 88 80 00 00 00 00 00 - 08 05 15 0D 10 0B 0A 00    ................
        09 98 08 0F 0B 78 88 00 - 0A 80 00 00 00 00 10 00    .....x..........
        0B 07 19 15 A7 88 75 00 - 0C 99 BC AA A2 20 22 00    ......u.......".
        0D 00 00 D0 00 00 00 00 - 0E 09 25 33 2F 29 1E 00    ..........%3/)..
        0F 50 21 2D 1F 9A B6 00 - 10 88 84 00 04 00 04 00    .P!-............
        11 00 00 00 00 00 00 00 - 12 09 2F 37 2F 29 1E 00    ........../7/)..
        13 50 1F 2D 1F 9A B6 00 - 14 88 C4 00 04 00 04 00    .P.-............
        15 00 00 00 00 00 00 00 - 16 0B 3F 33 2F 29 1E 00    ..........?3/)..
        17 50 21 2D 1F 9A B6 00 - 18 88 84 00 04 00 04 00    .P!-............
        19 00 00 00 00 00 00 00 - 1A 0B 51 37 2F 29 1E 00    ..........Q7/)..
        1B 50 1F 2D 1F 9A B6 00 - 1C 88 C4 00 04 00 04 00    .P.-............
        1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    
1:01 AM    #23 Text 0 File ThreadedTransfer.cpp, Line 268
    Pipe memory size 83836800
    
1:01 AM    #24 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:45.250 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #25 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:47.859 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #26 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:48.546 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #27 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:48.593 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #28 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:51.078 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #29 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:51.250 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #30 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:51.484 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #31 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:52.812 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #32 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:52.843 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #33 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:53.640 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #34 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:54.265 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #35 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:54.609 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #36 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:54.687 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #37 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:55.515 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #38 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:57.750 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #39 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:57.781 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #40 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:58.328 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #41 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:58.734 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:01 AM    #42 Text 0 File Cdrdrv.cpp, Line 1405
    01:01:59.437 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:02 AM    #43 Text 0 File Cdrdrv.cpp, Line 1405
    01:02:00.484 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:02 AM    #44 Text 0 File Cdrdrv.cpp, Line 1405
    01:02:01.093 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:03 AM    #45 SPTI -1046 File SCSIPassThrough.cpp, Line 181
    CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key:  0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data:   0x2A 00 00 00 03 C0 00 00 20 00 00 00 
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 
    Buffer x093d07c0: Len x10000
    0x22 00 C0 03 00 00 00 00 03 C0 00 08 00 00 00 00 
    0x08 00 6C 08 1A 17 1F 28 14 02 00 00 01 00 00 01 
    0x01 00 22 00 BF 03 00 00 00 00 03 BF 00 08 00 00 
    
1:03 AM    #46 CDR -1046 File Writer.cpp, Line 306
    Illegal disc
    F: TSSTcorp CDDVDW SH-S203D
    
1:03 AM    #47 Text 0 File DVDR.cpp, Line 3818
    EndDAO: Last written address was 959 (3BFh)
    
1:03 AM    #48 Phase 38 File dlgbrnst.cpp, Line 1767
    Burn process failed at 16x (22,160 KB/s)
    
1:03 AM    #49 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
1:03 AM    #50 Text 0 File Cdrdrv.cpp, Line 11411
    DriveLocker: UnLockVolume completed
    
1:03 AM    #51 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    

Existing drivers:

Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option) 


Second Log file

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0

Recorder:             <TSSTcorp CDDVDW SH-S203D>Version: SB00 - HA 1 TA 0 - 7.11.10.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default
CD-ROM:               <ELBY     CLONEDRIVE      >Version: 1.4  - HA 1 TA 1 - 7.11.10.0
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Hitachi HDS721616PLAT80          atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : HDT722516DLA380                  atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : TSSTcorp CDDVDW SH-S203D         atapi Port 2 ID 0  DMA: On 
CdRomPeripheral      : ELBY    CLONEDRIVE      1.4     VClone Port 4 ID 0  DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S203D   F:   CdRom0
ELBY CLONEDRIVE            G:   CdRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use       : 19 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

27.8.2008
ISO compilation
1:10 AM    #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
1:10 AM    #2 Text 0 File Isodoc.cpp, Line 6711
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate                : FALSE
    Write                   : TRUE
    Finalize CD             : TRUE
    Multisession            : FALSE
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 2 (Max. of 31 chars)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660 ;1 file extensions        : TRUE
    
1:10 AM    #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
    First writeable address = 0 (0x00000000)
    
1:10 AM    #4 Text 0 File Burncd.cpp, Line 3500
    Turn on Disc-At-Once, using DVD media
    
1:10 AM    #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
    FS Settings: using validator 'CUDFSettingsValidatorDVD'
    ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
    Changing UDF revision from '1.02' to '1.02'
    
1:10 AM    #6 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media:  2298495 (510:46.45, 4489MB)
    Last address to be written:            2281663 (507:02.13, 4456MB)
    
1:10 AM    #7 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)
    
1:10 AM    #8 Text 0 File DlgWaitCD.cpp, Line 2988
    Recorder: TSSTcorp CDDVDW SH-S203D, Media type: DVD-R
     Disc Manufacturer ID: <MBI 01> <RG40>
     Disc Application Code: 64, Disc Physical Code: 193
    
1:10 AM    #9 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
1:10 AM    #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2281664 (2281664) = #2281664/507:2.14
        relocatable, disc pos for caching/writing not required/ required
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2281664 blocks [F: TSSTcorp CDDVDW SH-S203D]
    --------------------------------------------------------------
    
1:10 AM    #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
    Prepare [F: TSSTcorp CDDVDW SH-S203D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4672847872, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   1 |    0x41 |  2281664 |        0 | 0x00
      2281664 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    
1:10 AM    #12 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
    
1:10 AM    #13 Text 0 File Burncd.cpp, Line 4286
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
    
1:10 AM    #14 Phase 24 File dlgbrnst.cpp, Line 1767
    Caching of files started
    
1:10 AM    #15 Text 0 File Burncd.cpp, Line 4405
    Cache writing successful.
    
1:10 AM    #16 Phase 25 File dlgbrnst.cpp, Line 1767
    Caching of files completed
    
1:10 AM    #17 Phase 36 File dlgbrnst.cpp, Line 1767
    Burn process started at 16x (22,160 KB/s)
    
1:10 AM    #18 Text 0 File ThreadedTransferInterface.cpp, Line 2726
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    
1:10 AM    #19 Text 0 File DVDR.cpp, Line 3262
    Recording mode: Sequential Recording Mode
    
1:10 AM    #20 Text 0 File DVDR.cpp, Line 3416
    Start write address at LBA 0
    DVD high compatibility mode: Yes
    
1:10 AM    #21 Text 0 File Cdrdrv.cpp, Line 10161
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
     Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
     Disc Size: 120 mm,      Maximum Transfer Rate: <not specified> (F h)
     Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
     Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
     Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
     Outer Limit of Data Recordable Area:          0 h
     Data in Burst Cutting Area (BCA) does not exist
      Revision number of maximum recording speed: 6.0
      Revision number of minimum recording speed: -
      Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - 
      Class: 0,  Extended part version: 33
      Start PSN of the Extra Border Zone: 0 h
      Start PSN of Physical format information blocks in Extra Border Zone: 0 h
     Media Specific [16..783]:
        00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        01 40 C1 FD 9E D8 52 00 - 02 85 0D 10 88 9A 80 00    .@....R.........
        03 4D 42 49 20 30 31 00 - 04 52 47 34 30 00 00 00    .MBI.01..RG40...
        05 88 80 00 00 00 02 00 - 06 09 0D 13 87 78 80 00    .............x..
        07 88 80 00 00 00 00 00 - 08 05 15 0D 10 0B 0A 00    ................
        09 98 08 0F 0B 78 88 00 - 0A 80 00 00 00 00 10 00    .....x..........
        0B 07 19 15 A7 88 75 00 - 0C 99 BC AA A2 20 22 00    ......u.......".
        0D 00 00 D0 00 00 00 00 - 0E 09 25 33 2F 29 1E 00    ..........%3/)..
        0F 50 21 2D 1F 9A B6 00 - 10 88 84 00 04 00 04 00    .P!-............
        11 00 00 00 00 00 00 00 - 12 09 2F 37 2F 29 1E 00    ........../7/)..
        13 50 1F 2D 1F 9A B6 00 - 14 88 C4 00 04 00 04 00    .P.-............
        15 00 00 00 00 00 00 00 - 16 0B 3F 33 2F 29 1E 00    ..........?3/)..
        17 50 21 2D 1F 9A B6 00 - 18 88 84 00 04 00 04 00    .P!-............
        19 00 00 00 00 00 00 00 - 1A 0B 51 37 2F 29 1E 00    ..........Q7/)..
        1B 50 1F 2D 1F 9A B6 00 - 1C 88 C4 00 04 00 04 00    .P.-............
        1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
        00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
    
1:10 AM    #22 Text 0 File ThreadedTransfer.cpp, Line 268
    Pipe memory size 83836800
    
1:10 AM    #23 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:42.531 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #24 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:43.515 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #25 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:45.109 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #26 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:45.156 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #27 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:46.015 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #28 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:48.250 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #29 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:49.203 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #30 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:49.953 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #31 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:51.218 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:10 AM    #32 Text 0 File Cdrdrv.cpp, Line 1405
    01:10:53.328 - F: TSSTcorp CDDVDW SH-S203D : Queue again later
    
1:11 AM    #33 SPTI -1114 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
    Sense Key:  0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data:   0x5C 00 00 00 00 00 00 00 0C 00 00 00 
    Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 
    Buffer x08c58340: Len xc
    
1:11 AM    #34 SPTI -1064 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
    Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x00
    CDB Data:   0x2A 00 00 00 02 80 00 00 20 00 00 00 
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 
    Buffer x09320540: Len x10000
    0x22 00 80 02 00 00 00 00 02 80 00 08 00 00 00 00 
    0x08 00 6C 08 1A 12 27 17 14 02 00 00 01 00 00 01 
    0x01 00 22 00 76 02 00 00 00 00 02 76 00 10 00 00 
    
1:11 AM    #35 CDR -1064 File Writer.cpp, Line 306
    Invalid block address
    F: TSSTcorp CDDVDW SH-S203D
    
1:12 AM    #36 Text 0 File DVDR.cpp, Line 3818
    EndDAO: Last written address was 639 (27Fh)
    
1:12 AM    #37 CDR -1114 File WriterStatus.cpp, Line 292
    Reset occurred
    F: TSSTcorp CDDVDW SH-S203D
    
1:12 AM    #38 TRANSFER -24 File WriterStatus.cpp, Line 292
    Could not perform end of Disc-at-once
    
1:12 AM    #39 Phase 38 File dlgbrnst.cpp, Line 1767
    Burn process failed at 16x (22,160 KB/s)
    
1:12 AM    #40 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
1:12 AM    #41 Text 0 File Cdrdrv.cpp, Line 11411
    DriveLocker: UnLockVolume completed
    
1:12 AM    #42 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    

Existing drivers:

Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option) 


I have used MBI discs and I know they are not that good but, that’s the ones that are available where I live and I have burnt 100s of them till date without any prob.

Please help. :bow:


#2

It’s still the same even after uprading FW to SB01 :frowning:


#3

I tried doing this http://sniptools.com/vault/getting-back-to-dma-mode-in-windows-xp

But, it’s still the same. Any ideas?

In order to use the drive I’ve manually changed the setting to PIO Only :frowning:


#4

[QUOTE=darshanjog;2117308]I tried doing this http://sniptools.com/vault/getting-back-to-dma-mode-in-windows-xp
[/QUOTE]

Did you read down that page and try the instructions suggested by “Stark”?


#5

[QUOTE=LesStrater;2117549]Did you read down that page and try the instructions suggested by “Stark”?[/QUOTE]
Please re-read my post. I can enable DMA Mode but, the Burner seems to malfunction in DMA mode and works only in PIO Mode.

This was not the case before I re-installed a clean XP SP2 with all latest hot fixes. :frowning:

I had always relied on CDFreaks forums before it seems my problem this time is unique and no one has a clue to help me out. :frowning:


#6

Don’t wanna seem to bump the thread as it’s already up. But, seriously any ideas guys & gals?

My head is sore with scrathing :frowning:


#7

Just installed the latest nVidia IDE Drivers (MCP61) in place of default MS ones and voila Nero CD-DVD Speed has started functioning in UDMA 5 Mode. Lets see the rest.


#8

A Burn Simulation @ 16x completed flawlessly :smiley:


#9

Yeah, umm, there’s no way to explain it, but sometimes doing the OPPOSITE of what we normally recommend works. Hope it keeps working for non-simulations. :bigsmile:


#10

[QUOTE=Albert;2118743]Yeah, umm, there’s no way to explain it, but sometimes doing the OPPOSITE of what we normally recommend works. Hope it keeps working for non-simulations. :bigsmile:[/QUOTE]
Yup am just gonna try that in a couple of mins. Keeping my fingers crossed. :smiley:


#11

Hurray! :smiley: :smiley:

Burn completed in Nero 7 flawlessly @ 16x in about 5.40 mins. LOL

This time the opposite was the solution. I had to install nVidia IDE Drivers in place of MS ones.