Unspecified target error

vbimport

#1

Can’t burn cd-r (any brand), get message target error. Anyone can help me??

Greetings

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 7/17/02 4:03:58 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/04 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <PLEXTOR DVDR PX-712A> Version: 1.06 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <intelata> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <E-IDE CD-950E/TKU >Version: A40 - HA 1 TA 1 - 6.6.0.6
Adapter driver: <intelata> HA 1
PLEXTOR DVDR PX-712A (Target 0, H:): Autoinsert On, DMA ?, Disconnect On, SyncDataXfer Off
E-IDE CD-950E/TKU (Target 1, I:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523700kB)
Free physical memory: 0MB (40kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.2.2005
CD-ROM (ISO)
4:46:38 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:46:38 PM #2 Text 0 File Burncd.cpp, Line 2870
PLEXTOR DVDR PX-712A
BURN-Proof activated

4:46:38 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

4:46:38 PM #4 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-712A running

4:46:38 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

4:46:38 PM #6 Text 0 File Burncd.cpp, Line 3155
Turn on Track-at-once, using CD-R/RW media

4:46:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359846 ( 79:59.71)
Last address to be written: 358934 ( 79:47.59)

4:46:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

4:46:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PLEXTOR DVDR PX-712A;
CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

4:46:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:46:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358935 (358935) = #358935/79:45.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358933 blocks [PLEXTOR DVDR PX-712A]
--------------------------------------------------------------

4:46:38 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PLEXTOR DVDR PX-712A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735406080, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
358935 | lead-out | 1 | 0x41 | 0x00

4:46:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1110
Removed 2 run-out blocks from end of track 1. Length: 358935 -> 358933.

4:46:38 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:46:38 PM #15 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

4:46:38 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:46:38 PM #17 Phase 65 File dlgbrnst.cpp, Line 1832
Burn process started

4:46:38 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:46:38 PM #19 Text 0 File Mmc.cpp, Line 21079
Set BUFE: BURN-Proof -> ON

4:46:44 PM #20 Text 0 File Cdrdrv.cpp, Line 1284
16:46:44.470 - PLEXTOR DVDR PX-712A\H1 T0 : Queue again later

4:46:57 PM #21 SCSI -400 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02C90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x1C 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x00 0x00

4:46:57 PM #22 CDR -400 File Writer.cpp, Line 311
Unspecified target error
PLEXTOR DVDR PX-712A\H1 T0

4:46:57 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:46:57 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:47:01 PM #25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
PLEXTOR DVDR PX-712A\H1 T0

4:47:01 PM #26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

4:47:01 PM #27 Text 0 File Mmc.cpp, Line 15779
<PLEXTOR DVDR PX-712A > start Close Session

4:47:20 PM #28 Phase 67 File dlgbrnst.cpp, Line 1832
Burn process failed

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 4/15/04 7:00:00 PM
File ‘IoSubsys\CDR4VSD.VXD’: Ver=5.3.2.31, size=101616 bytes, created 6/5/04 10:03:38 AM
File ‘IoSubsys\CDRALVSD.VXD’: Ver=5.3.2.31, size=20043 bytes, created 6/5/04 10:03:38 AM
File ‘IoSubsys\ACBHLPR.VXD’: Ver=1.01, size=40508 bytes, created 8/18/04 7:17:02 AM
File ‘IoSubsys\C2SCSI.MPD’: Ver=1, 0, 0, 33, size=209408 bytes, created 9/4/02 4:39:40 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File ‘…\System32\Drivers\1394bus.sys’: Ver=4.10.2225, size=38016 bytes, created 2/8/00 3:47:54 PM
File ‘…\System32\Drivers\Ohci1394.sys’: Ver=4.10.2225, size=36256 bytes, created 2/8/00 3:43:08 PM
File ‘…\System32\Drivers\Ntmap.sys’: Ver=4.10.2226, size=8704 bytes, created 3/27/00 1:40:58 PM
File ‘IoSubsys\Ntmaphlp.pdr’: Ver=4.10.2223, size=9849 bytes, created 10/12/99 2:56:42 PM
File ‘…\System32\Drivers\Sbp2port.sys’: Ver=4.10.2225, size=35696 bytes, created 3/27/00 1:57:12 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2223, size=69594 bytes, created 10/12/99 3:02:40 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2223, size=18889 bytes, created 11/17/99 5:36:48 PM
File ‘IoSubsys\ElbyCDIO.vxd’: Ver=4, 3, 3, 3, size=48871 bytes, created 1/2/05 2:06:02 AM
File ‘IoSubsys\intelata.mpd’: Ver=2.3.0.2160, 10/01/2002, size=99328 bytes, created 10/15/02 12:00:00 AM (Adapter driver for rec)

Registry Keys:


#2

PlexTools Professional V2.20 CD/DVD-ROM Maker
Copyright © 1999-2005 Plextor SA/NV
Sunday, February 27, 2005

Software information

Operating system: Windows 98 SE V4.10.2222 A
ASPI Manager: wnaspi32.dll version 4.71 (0002)
Description : ASPI for Win32 (95/NT) DLL (Adaptec)

Destination Information

IDE Interface 1 ID: - Maximum # Targets: -

Description: Secondary Ultra ATA Controller
Type : Hard disk controllers

Port Driver: INTELATA.MPD
Provider : Intel
Description: Intel Application Accelerator Driver (Intel Corporation)
Location : C:\WINDOWS\SYSTEM\iosubsys\intelata.mpd
Version : 2.3.0.2160, 10/01/2002
Date : 09/11/2002

ID 0: PLEXTOR DVDR PX-712A V1.06
Read speed: 17-40 X CAV, Jumper settings: 001, Buffer Underrun Proof enabled
Blank disc, Taiyo Yuden (type 1), 79:59:72

CD/DVD-ROM Maker Log

Selected write speed: 32 X
Allow Overburning : yes Leave Disc Open: no

Project: New Volume - 700.74 MB
Generating File System Information…
Start Simulation Copy 1/1
Simulating Write Lead In
Simulating Write Track 1 Start:00:00.00 Length:79:43.55
Write error at 00:44.60 Unspecified error (code 000000)


#3

Have you tried the self-diagnostics test? This way you can check if your drive is the problem or your system. How to run the self test can be found in your manual or here. What I find strange in your Nero log is that it doesn’t detect your drive’s UDMA mode. But, maybe this has something to do with Windows 98 (it’s been a while since I last used this operating system ;)).

Just thought of this one: have you installed the Intel Application Accelerator drivers?


#4

I agree with GameFreak as it looks like the Intel IDE drivers are getting in the way, uninstall them & use the basic windows default ones


#5

Yes I did install the Intel Application Accelerator. I’ll remove it.


#6

try to disable or remove any emulation software (i.e. alcohol 120%, cloneCD, etc.) if you have it/them installed.


#7

Guys,

I did the self-diagnostic test and it was fine and uninstall the Intel Application Accelerator. Checked dma under drive properties and just burned a cd at 48 speed without a problem!

THANKS FOR THE GREAT INPUT!!