Unspecified Recorder Error

vbimport

#1

Are you using a cracked registring code? There is a chance that NERO detects “fake” codes and this results in strange behaviour of the program. I don’t know exactly what happens because I have an official licence, but I know it’ll ruin you CDR’s.


This message was written by BhackStage (the original;)) But from another location


#2

G’Day
When I attempt to copy a CD with Nero ( latest version )a error message appears saying “Unspecified Recorder Error” - “Read CD Failed”. ( I have been successfully burning roms for the past two years without a hitch ). Can anyone enlighten me as to what the cause may be? Thankyou. Anzac ( Australia )

ps. I have posted the log file from nero below
Anzac
Australia
1480-0128-5000-4070-2960

Windows 98 4.10
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1017), size=48128 bytes, created 12/11/1998 1060
Nero Version: 4.0.5.6
Recorder: Version: 4.05 - HA 0 TA 6 - 4.0.5.6
Adapter driver: HA 0
CD-ROM: Version: 327P - HA 1 TA 1
Adapter driver: HA 1
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 23856742 Byte
ShowDrvBufStat : 0
EraseSpeed : 0
Physical memory : 127MB (130576kB)
Free physical memory: 18MB (19412kB)
Memory in use : 66 %
Wizard: On

CD-Copy
26.10.1999

813 #1 Phase 48 File dlgbrnst.cpp, Line 897
Analyzing CD

813 #2 CDCOPY -1 File CDCopy.cpp, Line 1928
CD is copyrighted

811 #3 CDCOPY -27 File CDCopy.cpp, Line 807
Results of analyzing the source CD:
without subcodes, without jitter corr.

812 #4 Phase 20 File dlgbrnst.cpp, Line 897
Start of read CD

812 #5 SCSI 0 File Cdrdrv.cpp, Line 964
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x31 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00

812 #6 SCSI 0 File Cdrdrv.cpp, Line 964
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x31 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00

817 #7 SCSI 0 File Cdrdrv.cpp, Line 964
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0xBE 0x00 0x00 0x00 0x02 0xA0 0x00 0x00 0x10 0xF8 0x00 0x00

817 #8 CDR -1 File CDCopy.cpp, Line 2947
Unspecified Recorder Error

817 #9 CDCOPY -27 File CDCopy.cpp, Line 1061
Results of analyzing the source CD:
Track 00: Index0=000.00, Index1=??:??.??, End=9544370.45, Mode=TRM_DATA_RAW_MODE2, Blocksize=2352, Track config=0x00

812 #10 Phase 22 File dlgbrnst.cpp, Line 897
Read CD failed

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 11/05/1998 810
File ‘IoSubsys\NEROCD95.VXD’: Ver=4, 0, 0, 2, size=29771 bytes, created 25/10/1999 176
File ‘IoSubsys\CDR4VSD.VXD’: Ver=2.5 (074), size=206726 bytes, created 6/05/1999 200
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 11/05/1998 810
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 11/05/1998 810


#3

G’Day Bhackstage@work
thanks for the reply, but since I posted the help request, I also tried all my other CD-R programs - Prassi, CD Creator, + Juggler, and none of them will allow me to burn a CD.
Their error messages vary??? Was wondering if a windows system file or driver or whatever may be the cause - it’s got me beat!!!
Cheers, Anzac


#4

Maybe its time to replace your writer…i had the same problem with my old philips3610…after many backups (when i say many i also mean many) u can toss it away…i heard that scsi writers can handle more backups…maybe its an other problem but mine had to be replaced…(already tried everything else like clean install of win98 and stuff)…