Unreadable disc xbox 360

after burning a xbox 360 game burnt successful but xbox said unreadable disc can anyone please help me out i am new to all this xbox stuff thanks

imgburn log

I 12:51:35 ImgBurn Version started!
I 12:51:35 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)
I 12:51:35 Total Physical Memory: 2,292,208 KB - Available: 1,632,792 KB
W 12:51:35 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 12:51:35 Initialising SPTI…
I 12:51:35 Searching for SCSI / ATAPI devices…
I 12:51:36 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 13:02:43 Operation Started!
I 13:02:43 Source File: F:\Downloads\fifa10x360\fifa10x360.dvd
I 13:02:43 Source File Sectors: 3,827,488 (MODE1/2048)
I 13:02:43 Source File Size: 7,838,695,424 bytes
I 13:02:43 Source File Volume Identifier: DVD_ROM
I 13:02:43 Source File Volume Set Identifier: 356fc000MS UDFBridge
I 13:02:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:02:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:02:44 Source File File System(s): ISO9660, UDF (1.50)
I 13:02:44 Destination Device: [2:0:0] HL-DT-ST DVD-RAM GH22NP20 1.04 (E:) (ATA)
I 13:02:44 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)
I 13:02:44 Destination Media Sectors: 4,173,824
I 13:02:44 Write Mode: DVD
I 13:02:44 Write Type: DAO
I 13:02:44 Write Speed: 2.4x
I 13:02:44 Link Size: Auto
I 13:02:44 Lock Volume: Yes
I 13:02:44 Test Mode: No
I 13:02:44 OPC: No
I 13:02:44 BURN-Proof: Enabled
W 13:02:44 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
I 13:02:44 Book Type Setting: DVD-ROM
I 13:02:44 User Specified L0 Data Zone Capacity: 1,913,760
I 13:02:44 Set L0 Data Zone Capacity Succeeded!
I 13:02:44 Filling Buffer… (40 MB)
I 13:02:45 Writing LeadIn…
I 13:03:21 Writing Session 1 of 1… (1 Track, LBA: 0 - 3827487)
I 13:03:21 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 3827487)
I 13:03:21 Writing Layer 0… (LBA: 0 - 1913759)
I 13:15:49 Writing Layer 1… (LBA: 1913760 - 3827487)
I 13:27:45 Synchronising Cache…
I 13:28:07 Closing Track…
I 13:28:42 Finalising Disc…
I 13:28:54 Exporting Graph Data…
I 13:28:55 Graph Data File: C:\Documents and Settings\Mark\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH22NP20_1.04_06-OCTOBER-2009_13-02_RICOHJPN-D01-67_2.4x.ibg
I 13:28:55 Export Successfully Completed!
I 13:28:55 Operation Successfully Completed! - Duration: 00:26:11
I 13:28:55 Average Write Rate: 5,228 KB/s (3.8x) - Maximum Write Rate: 5,592 KB/s (4.0x)

well i see your not using Verbatim DVD+R DL media… so that ‘could’ be a issue.

also… what drive do you have in your XBox360? … because if it’s a older Hitachi (i.e. prior to the v78/79 ones) drive those from what i heard are picky on what media you use (i.e. you will most likely have to use Verbatim on those) vs Samsung/BenQ/Liteon drives… but in general Hitachi’s are the worst drives for the XBox360 as they are the pickiest with media so it’s best just to avoid Hitachi drives if possible.

p.s. i am assuming you burned the game properly with ImgBurn by loading the .DVD file and NOT the .ISO file… which it appears you did since i can see the .dvd file in the ImgBurn log above.

also… it’s not a bad idea to run your ISO file through abgx360 v1.0.1 first before burning as it makes sure it’s properly made, but usually this aint required but it’s strongly recommended if your using XBox Live with your backup’s.

i also see your writing @ 4x … which is usually what i recommend as Verbatim 2.4x cert media seems to burn best @ 4x vs 2.4x. (i know you don’t have Verbatim DVD+R DL media because i can tell from the media code in the ImgBurn log above… but typically speaking 4x burn speed is a ‘safe bet’ for burning XBox360 games in general)

thank you for your reply on my way to get some verbatim disc
to give that a shot thanks again


Maybe if you bought it you would have some luck?

Maybe you should read the rules again! the rules are here!

Like RCM stated.

Thread Closed.