Unknow burn phase error log

vbimport

#1

This is the log that went with my last burn attempt.

Windows XP 5.1
IA32
WinAspi: -
Nero Version: 6.6.0.6
Recorder:             <ATAPI CD-R/RW 20X10>     Version: H.BK - HA 1 TA 1 - 6.6.0.6
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ATAPI 
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <JLMS     DVD-ROM XJ-HD166>Version: DD05 - HA 1 TA 0 - 6.6.0.6
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : MAXTOR 6L040J2                   atapi Port 0 ID 1  DMA: Off
CdRomPeripheral      : JLMS DVD-ROM XJ-HD166            atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : ATAPI CD-R/RW 20X10              atapi Port 1 ID 1  DMA: Off

=== CDRom-Device-Map ===
JLMS DVD-ROM XJ-HD166      D:   CDRom0
ATAPI CD-R/RW 20X10        F:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 254MB (261104kB)
Free physical memory: 67MB (69364kB)
Memory in use       : 73 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

5.2.2005
CueSheet
12:48:22 PM	#1 Text 0 File Burncd.cpp, Line 2870
	ATAPI CD-R/RW 20X10
	Seamless Link activated
	
12:48:22 PM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
12:48:22 PM	#3 Text 0 File Writer.cpp, Line 122
	Writer ATAPI    CD-R/RW 20X10    running
	
12:48:22 PM	#4 Text 0 File Burncd.cpp, Line 3155
	Turn on Disc-at-once/96, using CD-R/RW media
	
12:48:50 PM	#5 Text 0 File DlgWaitCD.cpp, Line 257
	Last possible write address on media:   359848 ( 79:59.73)
	Last address to be written:             293973 ( 65:21.48)
	
12:48:50 PM	#6 Text 0 File DlgWaitCD.cpp, Line 269
	Write in overburning mode: NO (enabled: CD)
	
12:48:50 PM	#7 Text 0 File DlgWaitCD.cpp, Line 2311
	Recorder: ATAPI CD-R/RW 20X10;
	   CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
	     Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
	
12:48:50 PM	#8 Text 0 File DlgWaitCD.cpp, Line 431
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
	
12:48:50 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 829
	Setup items (after recorder preparation)
	 0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
	    2 indices, index0 (150) provided
	    original disc pos #0 + 293974 (293974) = #293974/65:19.49
	    relocatable, disc pos for caching/writing not required/not required, no patch infos
	    -> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 293974 blocks [ATAPI    CD-R/RW 20X10]
	--------------------------------------------------------------
	
12:48:50 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 1042
	Prepare recorder [ATAPI    CD-R/RW 20X10] for write in raw writing
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos             0        367200     720015552, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    -150 |  lead-in |   0 |    0x41 | 0x00
	    -150 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	  293974 | lead-out |   1 |    0x41 | 0x00
	
12:48:50 PM	#11 Phase 24 File dlgbrnst.cpp, Line 1832
	Unknown BurnPhase
	
12:48:50 PM	#12 Text 0 File Burncd.cpp, Line 4042
	Cache writing successful.
	
12:48:50 PM	#13 Phase 25 File dlgbrnst.cpp, Line 1832
	Unknown BurnPhase
	
12:48:50 PM	#14 Phase 32 File dlgbrnst.cpp, Line 1832
	Unknown BurnPhase
	
12:48:50 PM	#15 Text 0 File ThreadedTransferInterface.cpp, Line 2604
	Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
12:48:50 PM	#16 Text 0 File Mmc.cpp, Line 16327
	StartDAO : CD-Text - Off
	
12:48:50 PM	#17 Text 0 File Mmc.cpp, Line 21079
	Set BUFE: Seamless Link -> ON 
	
12:55:33 PM	#18 Text 0 File WriterStatus.cpp, Line 116
	<ATAPI    CD-R/RW 20X10   > start writing Lead-Out at LBA 293974 (47C56h), lenght 6750 blocks
	
12:55:41 PM	#19 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
12:56:04 PM	#20 SCSI -1093 File Cdrdrv.cpp, Line 1178
	SCSI Exec, HA 1, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x02
	Sense Qual: 0xFF
	CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x02 0xFF 
	
12:56:36 PM	#21 Text 0 File Mmc.cpp, Line 16758
	EndDAO-Error: Eject to get the drive in a usable state
	
12:56:37 PM	#22 Phase 33 File dlgbrnst.cpp, Line 1832
	Unknown BurnPhase
	
12:56:37 PM	#23 Phase 36 File dlgbrnst.cpp, Line 1832
	Unknown BurnPhase
	
12:56:37 PM	#24 Text 0 File ThreadedTransferInterface.cpp, Line 2604
	Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
12:56:37 PM	#25 Text 0 File Mmc.cpp, Line 16327
	StartDAO : CD-Text - Off
	
12:56:37 PM	#26 SCSI -1080 File Cdrdrv.cpp, Line 1178
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037D4E00
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x3A
	Sense Qual: 0x00
	CDB Data:   0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x3A 0x00 
	
12:56:37 PM	#27 CDR -1080 File ThreadedTransferInterface.cpp, Line 1764
	Unknown CDR error
	
12:56:37 PM	#28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1764
	-27 Unknown error
	
12:56:37 PM	#29 Phase 38 File dlgbrnst.cpp, Line 1832
	Unknown BurnPhase
	

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 3:07:32 PM 
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 03/01/2005 11:33:44 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 03/01/2005 11:33:24 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 03/01/2005 11:33:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 12:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Edited, removed serial and placed the log in CODE blocks


#2

@ shakey28
You should remove or x-out the name and serial number from the top of your nero error log!

also

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-R/RW 20X10 atapi Port 1 ID 1 DMA: Off
Your DMA is off for your HDD and your cd-rw drive. try this
Let us know if that works.


#3

I followed advice for DMA for HDD and CD-RW being off. Followed the instruction completely to the end including unistalling and having the drivers reinstalled. Unfortunetly Device 1 for both channels does not change. Any more help would be greatly appreciated.

As well, thank you for the advice regarding removing my name and serial number from the top of the log file. Beginners error. I tried to edit the post to remove it and I could not, any help here would also be greatly appreciated.

Thank you