TSSTcorp CD/DVDW SH-W162Z wont burn DVD-R

Hello Everybody
I currently have a TSSTcorp CD/DVDW SH-W162Z, and now i cannot burn DVD-R al though i am suppose to. I use to before and now i cant. As well as i tried two softawares BURN4FREE, and Nero. Both are on latest versions. I get an error of soemsort saying the burn failed. Thatz with both softwares. It goes liek this i put in the blank, open it in nero/burn4free tehn selct my files and click burn. For nero it will remain at 3% for awhile then i’lll aev it i think after 20 minutes i’ll get the error message, and burn4free will just disspear, then reaper syaing it done the job but with soem errors so if you put that cd in , it wont even open the files properly. I have tried putting in different files still the same thing, however if i use DVD+R no errrors. My driver version is 5.1.2535.0. Here is the nero log i got:

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM 

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
 (Nero Express)
Recorder:             <TSSTcorp CD/DVDW SH-W162Z>Version: TS00 - HA 1 TA 0 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <CREATIVE DVD8400E        >Version: 1118 - HA 1 TA 1 - 6.6.1.4
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : TSSTcorp CD/DVDW SH-W162Z        atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : CREATIVE DVD8400E                atapi Port 0 ID 1  DMA: Off
DiskPeripheral       : ST3160812AS                   SiSRaid2 Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162Z  F:   CDRom0
CREATIVE DVD8400E          G:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047916kB)
Free physical memory: 301MB (309080kB)
Memory in use       : 70 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

5.7.2006
ISO compilation
12:21:53 AM	#1 Text 0 File Isodoc.cpp, Line 6475
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
12:21:53 AM	#2 Text 0 File Burncd.cpp, Line 3012
	TSSTcorp CD/DVDW SH-W162Z
	Super Link activated
	
12:21:53 AM	#3 Text 0 File ThreadedTransfer.cpp, Line 531
	ReadBuffer-Pipe got 262144KB of Memory
	
12:21:53 AM	#4 Text 0 File Reader.cpp, Line 124
	Reader running
	
12:21:53 AM	#5 Text 0 File Writer.cpp, Line 122
	Writer TSSTcorp CD/DVDW SH-W162Z running
	
12:21:53 AM	#6 ISO9660GEN -11 File geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
12:21:54 AM	#7 Text 0 File Burncd.cpp, Line 3305
	Turn on Track-At-Once, using DVD media
	
12:21:54 AM	#8 Text 0 File DlgWaitCD.cpp, Line 281
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1894352 (420:58.02, 3699MB)
	
12:21:54 AM	#9 Text 0 File DlgWaitCD.cpp, Line 293
	Write in overburning mode: NO (enabled: CD)
	
12:21:54 AM	#10 Text 0 File DlgWaitCD.cpp, Line 2612
	Recorder: TSSTcorp CD/DVDW SH-W162Z, Media type: DVD-R
	 Disc Manufacturer: FUJIFI - LM03
	 Disc Application Code: 64, Disc Physical Code: 193
	
12:21:54 AM	#11 Text 0 File DlgWaitCD.cpp, Line 459
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
12:21:54 AM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1894353 (1894353) = #1894353/420:58.3
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1894353 blocks [TSSTcorp CD/DVDW SH-W162Z]
	--------------------------------------------------------------
	
12:21:54 AM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3879634944, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 1894353 | lead-out |   1 |    0x41 | 0x00
	
12:21:54 AM	#14 Text 0 File SCSIPassThrough.cpp, Line 38
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
12:21:54 AM	#15 Text 0 File SCSIPassThrough.cpp, Line 83
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
12:21:54 AM	#16 Phase 24 File dlgbrnst.cpp, Line 1685
	Caching of files started
	
12:21:54 AM	#17 Text 0 File Burncd.cpp, Line 4145
	Cache writing successful.
	
12:21:54 AM	#18 Phase 25 File dlgbrnst.cpp, Line 1685
	Caching of files completed
	
12:21:54 AM	#19 Phase 36 File dlgbrnst.cpp, Line 1685
	Burn process started at 8x (11,080 KB/s)
	
12:21:54 AM	#20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
12:21:54 AM	#21 Text 0 File DVDR.cpp, Line 2707
	Recording mode: Sequential Recording Mode for Multisession
	
12:21:54 AM	#22 Text 0 File DVDR.cpp, Line 2863
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
12:21:54 AM	#23 Text 0 File Cdrdrv.cpp, Line 8647
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      0 h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
12:32:46 AM	#24 SPTI -1114 File SCSIPassThrough.cpp, Line 289
	F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
	Sense Key:  0x06 (KEY_UNIT_ATTENTION)
	Sense Code: 0x29
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 01 C0 00 00 20 00 00 00 
	Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 
	Buffer x06d40000: Len x10000
	0x05 7E 0C 66 7D 06 E7 45 46 A7 EC 1C 83 45 9F 01 
	0x1E 40 87 63 99 A2 50 D3 A5 3C 61 FF 63 D9 73 A2 
	0x67 6D 23 8D D7 57 17 45 E8 7E EB 61 D1 DC 8B 7B 
	
12:32:46 AM	#25 CDR -1114 File Writer.cpp, Line 311
	Reset occurred
	F: TSSTcorp CD/DVDW SH-W162Z
	
12:32:46 AM	#26 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
12:32:46 AM	#27 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
12:32:46 AM	#28 Text 0 File DVDR.cpp, Line 3103
	EndDAO: Last written address was 447
	
12:32:46 AM	#29 Phase 133 File dlgbrnst.cpp, Line 1685
	Writing short lead-out
	
12:32:55 AM	#30 SPTI -1176 File SCSIPassThrough.cpp, Line 289
	F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x72
	Sense Qual: 0x04
	CDB Data:   0x5B 01 02 00 00 03 00 00 00 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 
	
12:32:55 AM	#31 CDR -1176 File WriterStatus.cpp, Line 167
	Session fixation error
	F: TSSTcorp CD/DVDW SH-W162Z
	
12:32:55 AM	#32 TRANSFER -24 File WriterStatus.cpp, Line 167
	Could not perform end of Disc-at-once
	
12:32:55 AM	#33 Phase 38 File dlgbrnst.cpp, Line 1685
	Burn process failed at 8x (11,080 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/19/2006 2:34:55 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Ok. Thanks
Ayhan

Hi and welcome!

At first, edit your post (there are few minutes left to do that) and remove your Nero serial.

Are you able to do successful burns using DVD+R media? This might be an important information. You should also re-check jumpers and cable, as your second drive (Creative DVD-ROM) is only running in PIO mode.

Michael

Upgrade to latest firmware TS01. http://www.samsungodd.com/eng/

Try another disc or different type dvd-r.

The mediacode of your disc is FUJIFILM03, which my SH-W162c burns with excellent result.

DISABLE Multisession!!

Hello

Well i did wat you guys chekc i updated my filmware, and still no good!
Well i donno really how to check for the cable
And i have already disbaled multisession before in my other attempts still no hope
Tried different DVD-R, still no Hope

I think its my driver version i donno how to update it though. Ihave a new log tell me if you want me to post it. i donno if it’ll maek much of a difference though…

Really appreaciate the help form you guys, THANKS

Ayhan

Can you post the new log. Remember to remove thr serial before posting.

Your Samsung don’t need a driver, but uses Windows native driver.

what’s the brand of the dvd-r?

Hello

Well here is the log
And its a samsung dvd writer

Ayhan
Home

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <CREATIVE DVD8400E >Version: 1118 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 0 ID 0 DMA: On
CdRomPeripheral : CREATIVE DVD8400E atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160812AS SiSRaid2 Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162Z F: CDRom0
CREATIVE DVD8400E G: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 290MB (297248kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.7.2006
ISO compilation
12:36:05 AM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:36:05 AM #2 Text 0 File Burncd.cpp, Line 3012
TSSTcorp CD/DVDW SH-W162Z
Super Link activated

12:36:05 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

12:36:05 AM #4 Text 0 File Reader.cpp, Line 124
Reader running

12:36:05 AM #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running

12:36:05 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:36:05 AM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using DVD media

12:36:05 AM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2224261 (494:16.61, 4344MB)

12:36:05 AM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

12:36:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: TSSTcorp CD/DVDW SH-W162Z, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

12:36:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:36:05 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2224262 (2224262) = #2224262/494:16.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2224262 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------

12:36:05 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4555288576, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2224262 | lead-out | 1 | 0x41 | 0x00

12:36:05 AM #14 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:36:05 AM #15 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:36:05 AM #16 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

12:36:05 AM #17 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

12:36:05 AM #18 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

12:36:05 AM #19 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)

12:36:05 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:36:05 AM #21 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

12:36:05 AM #22 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

12:36:05 AM #23 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

12:46:29 AM #24 SPTI -1114 File SCSIPassThrough.cpp, Line 289
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 01 C0 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x06e40000: Len x10000
0xF2 B2 DC E5 46 09 20 0D 1B 15 00 23 62 39 78 2D
0x7F F2 D0 D0 AC DB 10 BD 04 D0 48 0A 4A 2E D0 77
0x02 DA CE 71 B3 19 30 43 C7 79 EB 9E BC CD 05 83

12:46:29 AM #25 CDR -1114 File Writer.cpp, Line 311
Reset occurred
F: TSSTcorp CD/DVDW SH-W162Z

12:46:29 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:46:29 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:46:29 AM #28 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 447

12:46:29 AM #29 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 4/19/2006 2:34:55 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Connection problem.

File ‘Drivers\InCDfs.SYS’: Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)

Unistall Nero InCD4.

Nvidia NFocre IDE chipset?

Hello

Sorry for the delay everone, well i dunt think the cables are messed up but i am gonna remve Incd when iknow how to.

Well thank You i’ll post soon , bene really busy with work!

Thanks
Ayhan

Also unplug that Creative drive.

hi
can any one plz help me!
i had bought TSSTcorp CD/DVDW SH-W162Z recently and also burnt one cd for songs and that gone ok . but now when ever i try to burn dvd it gives error “write error” on windows xp and “power compilation error” in windows 98. then i tried to write cd then again same errors . i also updated my firmfare from ts00 to ts01 but same errors here is my latest log file plz help me.

Amit Sabharwal
Home

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 11/20/2005 9:48:22 PM
ahead WinASPI: File ‘D:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 3/13/2006 6:06:22 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4h
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ASUS CD-S500/A >Version: 1.2D - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST317221A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S500/A atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
ASUS CD-S500/A H: CDRom0
TSSTcorp CD/DVDW SH-W162Z I: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 126MB (129524kB)
Free physical memory: 25MB (26284kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.1.1999
CD-ROM (ISO)
12:04:54 AM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

12:04:55 AM #2 Text 0 File Burncd.cpp, Line 3012
TSSTcorp CD/DVDW SH-W162Z
Super Link activated

12:04:55 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 23552KB of Memory

12:04:55 AM #4 Text 0 File Reader.cpp, Line 124
Reader running

12:04:55 AM #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running

12:04:55 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:04:56 AM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media

12:04:56 AM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 225798 ( 50:12.48)

12:04:56 AM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

12:04:56 AM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: TSSTcorp CD/DVDW SH-W162Z

12:04:56 AM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:04:56 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 225799 (225799) = #225799/50:10.49
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 225797 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------

12:04:56 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 462743552, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
225799 | lead-out | 1 | 0x41 | 0x00

12:04:56 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 225799 -> 225797.

12:04:56 AM #15 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:04:56 AM #16 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:04:56 AM #17 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

12:04:56 AM #18 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

12:04:56 AM #19 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

12:04:56 AM #20 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (2,400 KB/s)

12:04:56 AM #21 SPTI -1189 File SCSIPassThrough.cpp, Line 289
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x03016800: Len x4000

12:04:56 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:04:57 AM #23 Text 0 File Mmc.cpp, Line 21840
Set BUFE: Super Link -> ON

12:05:39 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 289
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 20 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x085b0000: Len x10000
0xF8 A5 99 E3 E9 E1 2F 3C 35 44 64 93 43 A1 45 DF
0x43 D5 25 43 8C 00 24 B6 47 73 A4 3D A2 06 B2 34
0x48 F4 AD E8 87 7B 41 3A 25 20 95 EF B4 AC E9 1E

12:05:39 AM #25 CDR -1135 File Writer.cpp, Line 311
Write error
I: TSSTcorp CD/DVDW SH-W162Z

12:05:39 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:05:39 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:05:39 AM #28 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
I: TSSTcorp CD/DVDW SH-W162Z

12:05:39 AM #29 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

12:05:39 AM #30 Text 0 File Mmc.cpp, Line 16608
<TSSTcorpCD/DVDW SH-W162Z> start Close Session

12:06:06 AM #31 SPTI -1194 File SCSIPassThrough.cpp, Line 289
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 04 00 80

12:06:06 AM #32 CDR -1194 File WriterStatus.cpp, Line 249
PMA update failure
I: TSSTcorp CD/DVDW SH-W162Z

12:06:06 AM #33 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

12:06:06 AM #34 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation

12:06:06 AM #35 SPTI -1169 File SCSIPassThrough.cpp, Line 289
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80
Buffer x03015c00: Len x3c
0x00 00 00 00 00 00 00 00 05 32 41 04 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:06:06 AM #36 CDR -1169 File WriterStatus.cpp, Line 249
Logical unit not ready, operation in progress
I: TSSTcorp CD/DVDW SH-W162Z

12:06:06 AM #37 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

12:06:06 AM #38 SPTI -1169 File SCSIPassThrough.cpp, Line 289
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80
Buffer x03015c00: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:06:06 AM #39 SPTI -1169 File SCSIPassThrough.cpp, Line 289
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80
Buffer x03015c00: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:06:06 AM #40 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (2,400 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/20/2005 9:48:22 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)