Trouble with lg 4167b and nero

vbimport

#1

cant burn anything have used 4 different mdia help!!!

Rick0
commpro
5c80001080100000000579235057

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L200P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L060J3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 410MB (420044kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.4.2006
Burn DVD Image
1:31:22 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

1:31:22 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

1:31:22 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVDRAM GSA-4167B running

1:31:22 PM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

1:31:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2282195 (507:09.20, 4457MB)

1:31:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

1:31:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R
Disc Manufacturer: SONY04 - D1
Disc Application Code: 64, Disc Physical Code: 193

1:31:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:31:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2282196 (2282196) = #2282196/507:9.21
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282196 blocks [D: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

1:31:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4673937408, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2282196 | lead-out | 1 | 0x41 | 0x00

1:31:22 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

1:31:22 PM #12 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)

1:31:22 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

1:31:22 PM #14 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

1:31:22 PM #15 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

1:31:22 PM #16 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

1:31:22 PM #17 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

1:45:38 PM #18 Text 0 File WriterStatus.cpp, Line 116
<D: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 2282196 (22D2D4h), length 0 blocks

1:45:38 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:45:38 PM #20 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2282191

1:45:38 PM #21 CDR -1 File ThreadedTransferInterface.cpp, Line 1937
Unspecified Recorder Error
D: HL-DT-ST DVDRAM GSA-4167B

1:45:38 PM #22 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once

1:45:38 PM #23 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1

1:45:38 PM #24 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
D: HL-DT-ST DVDRAM GSA-4167B

1:45:38 PM #25 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

1:45:38 PM #26 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Also it works okay on simulation then craps out on real burn???


#3

[B]Welcome[/B] to cdfreaks. :wink:

Can’t see you finalized that disc.

You can also try ImgBurn to determin if the cause of this issue is you drive or media.

BTW, no need to crosspost, it’s against the forum rules.


#4

First update Nero 7.

Then please ask an moderator to remove the serial from the logfile/post.

Also try with better media.