TR07 or TU07 for Toshiba SD-R6572M

CD, DVD and (Ultra HD) Blu-ray Writers
#1

I have a TSST TS-L532M (Toshiba SD-R6572M) in my IBM T30 laptop which has two IDE channels (hard drive on one, dvd burner on the other)…so I shouldn’t end up with a toasted WinXP through IDE conflicts, just don’t want to mess up the dvd burner.

My problem is that although the SD-R6572M is noted as CSEL on the case, the drive is set to Master (as per Nero Infotool). Info I have so far is conflicting as some posts indicate that TU07 should be used with CSEL (usually slave) and others that TR07 should be used with inverse CSEL (usually master).

So which firmware upgrade should I use (drive has HR04 at present and I am getting burning errors with Verbatim DVD+R DL disks): TU07 or TR07?

Thanks for any help,
Beowulf57

#2

Can you post a burn log or tell us exactly what the errors are?

#3

Here you go:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-L532M>Version: HR04 - HA 2 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-L532M>Version: HR04 - HA 2 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 2

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532M atapi Port 2 ID 0 DMA: On
DiskPeripheral : ST960822A atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532 D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047536kB)
Free physical memory: 585MB (599812kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.7.2007
===== Disc-Copy over image - 1st step : Copy to image …

4:10:58 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

4:10:58 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

4:10:58 PM #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
Last LBA on layer 0 = 1989119 / 0x1E59FF / 3884MB
S01 T01 Con 0x14 Start 0 Len 3800864 (gap 0) Blank 0 Res -1 Dmg 0 Mode TRM_DATA_MODE1 (0)

4:10:58 PM #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 3800864 = 3800864, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

4:10:58 PM #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

4:10:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 3800863 (844:38.13, 7423MB)

4:10:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

4:10:59 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

4:10:59 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:10:59 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 3800864 (3800864) = #3800864/844:38.14
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3800864 blocks [ Image Recorder ]
--------------------------------------------------------------

4:10:59 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 7784476672, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3800864 | lead-out | 1 | 0x00 | 0x41

4:10:59 PM #12 Phase 120 File dlgbrnst.cpp, Line 1845
Creating the image for burning

4:10:59 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:46:56 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 3800864 (39FF20h), lenght 0 blocks

4:46:56 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:46:56 PM #16 Phase 121 File dlgbrnst.cpp, Line 1845
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image …

4:47:05 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

4:47:05 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-L532M running

4:47:05 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1’
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -805457920
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=844:38.14 ( 3800864)
LBRK: Last LBA on layer 0 = 1989119 / 0x1E59FF / 3884MB
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\User\My Documents\My Videos\Keeping Mum.nrg>

4:47:05 PM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

4:48:29 PM #5 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3800863 (844:38.13, 7423MB)

4:48:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

4:48:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-L532M, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

4:48:29 PM #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

4:48:29 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 3800864 (3800864) = #3800864/844:38.14
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3800864 blocks [TSSTcorp CD/DVDW TS-L532M]
--------------------------------------------------------------

4:48:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-L532M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7784169472, ISRC ""
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3800864 | lead-out | 1 | 0x00 | 0x41

4:48:44 PM #11 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2.4x (3,324 KB/s)

4:48:44 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:48:51 PM #13 Text 0 File DVDPlusDualLayer.cpp, Line 449
L0 Data Zone Capacity set to 1989120 (1E5A00h, 3885MB) -> OK, confirmed setting

4:48:51 PM #14 CDR -1205 File DVDPlusDualLayer.cpp, Line 465
Burning Layer 1

4:48:51 PM #15 Text 0 File DVDPlusDualLayer.cpp, Line 473
Start writing layer 1 at address 0 (0h)

4:48:51 PM #16 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 2159FF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MKM…
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16…63]:
00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 …MKM…001.@
25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7…/c./c!#…
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 …!#…

4:48:51 PM #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 38:57,515 (2337515ms) -> OK

4:48:51 PM #18 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes

5:09:15 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06240000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x1E 0x1C 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

5:09:15 PM #20 CDR -1135 File Writer.cpp, Line 304
Write error

5:09:15 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:09:16 PM #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

5:09:16 PM #23 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

5:09:16 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

5:09:16 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

5:09:16 PM #26 CDR -1046 File WriterStatus.cpp, Line 164
Illegal disc

5:09:16 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

5:09:16 PM #28 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

5:09:16 PM #29 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 2.4x (3,324 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

#4

Would you give ImgBurn a try to see if we can take Nero out of the equation.

#5

I have used that programme before…and since I have also had the same burn problems with CDClone (that has successfully burned DVD+R DL, but with a number of coasters as well), I think we’re barking up the wrong tree. Since another burner software had these problems before I even tried Nero. When CDClone had errors half way through the burn, I tried Nero and was successful…then a few discs later, the problem came up again.

Have you an answer to my original query re: TU07 versus TR07?

Thanks for your help,

Beowulf57

#6

If you are having problems approx half way through, then your problem is most likely the layer break, therefore would be a problem with the way you ripped it to your hard drive.

5:09:16 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

This tells me that your drive doesn’t like the media you have chosen & if it wasn’t for the MID of that media, I would say to use Verbatim Dvd+R DL Made in Singapore. So we come back to the firmware & the age of the drive & I am sorry that is were I am stumped because you say you have tried both & I couldn’t find anything on it at The Firmware Page. One thing I can tell you is you should probably update your Nero. Hopefully there is somebody knowledgeable on these drives that can help you.

http://club.cdfreaks.com/showthread.php?t=159619
http://club.cdfreaks.com/showthread.php?t=178541
http://forum.cdfreaks.com/showthread.php?t=174532&page=2&pp=25
http://forum.rpc1.org/viewtopic.php?t=36785
http://forum.rpc1.org/viewtopic.php?t=40337

#7

Use Imgburn.

You cannot just crossflash with another firmware which is not for your drive, [B]especially with an slimtype drive![/B]

#8

I’m a bit confused now: what I have read indicated that this firmware was for the SD-R6572M and Discinfo 1.6.1 from rpc1 indicates that my TS-L532M is a Toshiba SD-R6572M?

Please illuminate on this issue.

Thanks,

Beowulf57

#9

Problem solved: Backfire has checked the drive label (CSEL) and informed me that TU07 is the appropriate firmware upgrade.
Thanks to all and I’ll post results.

#10

Flashing was successful and the drive now shows Ultra DMA Mode 5 (was Multi word DMA Mode 2), CPU usage at 1x: 6% (was 62%), and a Burst rate of 26MB/s (was 13.8). Not a fast drive by any stretch of the imagination compared to recent performance levels, but still an improvement.

Thanks again and I’ll see if my burning woes decrease after updating Nero.

Beowulf57

#11

Nope, HDD shows UDMA5 and the burner UDMA2.

#12

Correct: Okay…I sorted out the odd UDMA listings: my T30 configuration panel shows that the device bay (Toshiba SD-R6572M) is using IRQ 15, which is the secondary IDE channel and in UDMA2…the hard drive is on the primary IDE channel (IRQ 14) and in UDMA5 as you would expect. Problem was simply that the Nero Infotool misreports adapter 3 as the primary IDE channel and shows the Toshiba attached to that channel…

Thanks,
Beowulf57

#13

Update: after firmware update, successful burning single and dual layer, with Nero, CDClone and Imgburn.