That's weird I was not able to burn Three's Company

vbimport

#1

I did the 2nd button. Because the quality was the same that if I took the 1st button. I used Maxell DVD-R 8X and I burned at 4X speed. It’s been more than 20 minutes on the 18 % of completed (writing). So I had to turn off my computer. I thought that Maxell were good media. I’m kind of confused. Is it that the disc 1 of Three’s Company is too big? I would like to burn them for my father.

thank you

boomette1


#2

@ boomette1,

The problem you are reporting is most likely caused by DVD media incompatibility between your DVD Burner and the particular DVD media you are using. If you are experiencing difficulty with your DVD media it is prudent to insure that your DVD Burner has the most current up to date firmware available for your DVD Burner installed.

To determine the current firmware of your DVD burner use a software utility similar to DVDInfo Pro (http://www.dvdinfopro.com/).

Suggest visiting the CD Freaks DVD Burner Forum (http://club.cdfreaks.com/forumdisplay.php?f=61) for information on obtaining the latest firmware available for your particular DVD Burner. The folks at the CD Freaks DVD Burner Forum are very knowledgeable and have developed various firmwares that optimize the full potential of your particular DVD Burner.

It has been stated many times through out the CloneDVD and AnyDVD Forums saying that you are use “XYZ Disks” does not fully describe the actual DVD Media you are using. Most DVD media retailers do not actually manufacture their own DVD media; they just purchase the media from some DVD media manufacture and then put it in boxes with their name on the box. Many times these DVD media manufactures are located in China and unfortunately this DVD media proves to be problematic. To accurately describe your DVD media you need to provide the Manufacture ID and Media Code (Example- RitekG05). You can obtain the Manufacture ID and Media Code by using DVDInfo Pro (http://www.dvdinfopro.com) or similar software utility.

Until you provide the actual Manufacture ID and Media Code of the particular problematic DVD media it is impossible to know if this particular DVD media is of good quality.

Best Regards,
bjkg


#3

Why don’t you try burning to a folder first and see if it completes. Then try burning to disc and see what happens. Also, could you tell what version of CloneDVD you are using, and if you are using anydvd, what version of that?


#4

The media code for Maxell DVD-R 8X is RITEKG05. I was able to burn on these medias (I did maybe 27 of them). They all come from Taiwan.

I burned also 25 Fujifilm DVD-R 8X made in Taiwan : ProdiscF01 and it was perfect.

I have the burner : PHILIPS DVD±RW DVD8631 and the firmware revision : CD21.

I’ll visit the CD Freaks DVD Burner Forum.

thank you

boomette1


#5

@strachan I use CloneDVD2 2.8.4.1 and AnyDVD 5.2.7.2

I don’t even have an error message. All the files are put in a folder without no problem. It’s the writting that bugs.

boomette1


#6

@ boomette1,

Since you have the PHILIPS DVD±RW DVD8631 suggest viewing the below Forum posting that might prove to be of some assistance to you.

http://club.cdfreaks.com/showthread.php?t=135615&highlight=8631

Best Regards,
bjkg