Task 2 not starting

vbimport

#1

I have been using DVD fab for a couple of years. I have just updated my DVDFab 4 Platium. I start to burn a full disc, even just main movie, a disc I have already burned once successfully.

It completes task one. Not a problem.

Starts to write and then time just creep on and on and on. It does give me a estimated time to finish, no percentage or speed readings nothing. I have tried with Nero burn 7 and VOS writings. Still have the same result. I have tried with 2 different DVD drives as I have 2 in my computer, neither are writing. The drive is blinking like it would if it is burning, but it just doesn’t burn and the software stops responding after I cancel the operation.

Here is my log.

04/02/2008 4:25:51 PM info Write started 2201888 sectors to write
04/02/2008 4:25:51 PM info Init success: DVD-R packet writing
04/02/2008 4:25:51 PM warning Init DVD-R Packet: Track reserved, 2202128 sectors available. Write start at 0
04/02/2008 4:25:51 PM info Writing speed requested x18.0, effective x18.0
04/02/2008 4:25:51 PM info Available write speed: 18x, 18x, 16x, 16x, 8x, 8x, 4x
04/02/2008 4:25:51 PM info Media ID: SONY16D1
04/02/2008 4:25:51 PM info Media type: DVD-R
04/02/2008 4:25:51 PM info Ultra DMA mode 5 (ATA100)
04/02/2008 4:25:51 PM info Scanned files #18, folder #2 - total size 4508350464 b. (4.2 Gb.)
04/02/2008 4:25:51 PM info Inserted media type : DVD-R
04/02/2008 4:25:51 PM info Write started
04/02/2008 3:56:44 PM info New media inserted. Burning layer is ready to write
04/02/2008 3:56:43 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
04/02/2008 3:56:43 PM info New Drive selected : 3:0:0 - HL-DT-ST DVDRAM GSA-H62L DL00 [J] (Ide)
04/02/2008 3:54:38 PM info Current Drive selected : 0:1:0 - HL-DT-ST DVDRAM GSA-4167B DL13 [E] (Ide)
04/02/2008 3:54:38 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
04/02/2008 3:54:38 PM info User default language : 4105 (0x1009h) - English (Canadian)
04/02/2008 3:54:38 PM info System default language : 4105 (0x1009h) - English (Canadian)
04/02/2008 3:54:38 PM info DLL Version 2.1.5.335
04/02/2008 3:54:38 PM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
04/02/2008 3:54:38 PM info Version 4, 0, 5, 5
04/02/2008 3:54:38 PM info ExeName : “C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe”
04/02/2008 3:54:38 PM info OS : Personal (Build 6000)
04/02/2008 3:54:37 PM info ******************** Report session started ********************

Help please


#2

Slow your write speed down to 8X. Never burn a max. DVD-R seems to be more of a problem than DVD+R in my experience.


#3

Had speed set to recommanded, but have changed it to 8x.

I will see if that works.

Thanks


#4

Didn’t work.

Anyone else with any other suggestions?


#5

Hi KWI and welcome to cdfreaks,

[B]Common Settings > DVD > Write > Write Type of DVD-R Media[/B]
Change from Packet Writing to[B] SAO[/B]

Hope this helps, let us know…


#6

[FONT=Times New Roman]With my burner (LITE-ON DVDRW SHM-165H6S HS0E) I have found that with Verbatim 16x DVD-R discs (MCC 03RG20) I can only burn them at a maximum of 4x with any burn engine including VSO (and I’m using SAO writing).[/FONT]

You might want to slow down to 4x and see if that helps.


#7

[quote=Senor Bag;1993827][FONT=Times New Roman]With my burner (LITE-ON DVDRW SHM-165H6S HS0E) I have found that with Verbatim 16x DVD-R discs (MCC 03RG20) I can only burn them at a maximum of 4x with any burn engine including VSO (and I’m using SAO writing).[/FONT]

You might want to slow down to 4x and see if that helps.[/quote] You might want to install the latest firmware for your burner as it is the FW that really controls your burn speed in a sense


#8

To my knowledge, HSOE is the most recent firmware for the SHM-165H6S. However, if you know of a more recent or better firmware for this drive please advise. Thank you.


#9

now I get this error in my log

error Write error at 0 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]

I tried a different movie this time. Another one that I burned successfully and that was the error.

And for the other burner, I get nothing. just time going by and software crash.

here is the whole log for both burners.

05/02/2008 5:29:29 PM info Write started 2204016 sectors to write
05/02/2008 5:29:29 PM info Init success: DVD-R SAO
05/02/2008 5:29:29 PM info Writing speed requested x8.0, effective x8.0
05/02/2008 5:29:28 PM info Available write speed: 18x, 18x, 16x, 16x, 8x, 8x, 4x
05/02/2008 5:29:28 PM info Media ID: SONY16D1
05/02/2008 5:29:28 PM info Media type: DVD-R
05/02/2008 5:29:28 PM info Ultra DMA mode 5 (ATA100)
05/02/2008 5:29:28 PM info Scanned files #315, folder #2 - total size 4512065536 b. (4.2 Gb.)
05/02/2008 5:29:28 PM info Inserted media type : DVD-R
05/02/2008 5:29:28 PM info Write started
05/02/2008 5:29:18 PM info New media inserted. Burning layer is ready to write
05/02/2008 5:29:17 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
05/02/2008 5:29:17 PM info New Drive selected : 3:0:0 - HL-DT-ST DVDRAM GSA-H62L DL00 [J] (Ide)
05/02/2008 5:28:02 PM info Media removed. Burning layer not ready to write
05/02/2008 5:24:22 PM info New media inserted. Burning layer is ready to write
05/02/2008 5:17:35 PM error Write error at 0 (16) - Code 05 21 02 [Illegal request, Invalid address for Write]
05/02/2008 5:17:21 PM info Write started 2204016 sectors to write
05/02/2008 5:17:20 PM info Init success: DVD-R SAO
05/02/2008 5:17:20 PM info Writing speed requested x8.0, effective x8.0
05/02/2008 5:17:20 PM info Available write speed: 16x, 16x, 8x, 8x, 4x
05/02/2008 5:17:20 PM info Media ID: SONY16D1
05/02/2008 5:17:20 PM info Media type: DVD-R
05/02/2008 5:17:20 PM info Not Applicable to this bus type
05/02/2008 5:17:19 PM info Scanned files #315, folder #2 - total size 4512065536 b. (4.2 Gb.)
05/02/2008 5:17:19 PM info Inserted media type : DVD-R
05/02/2008 5:17:18 PM info Write started
05/02/2008 4:41:22 PM info New media inserted. Burning layer is ready to write
05/02/2008 4:41:21 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
05/02/2008 4:41:21 PM info New Drive selected : 0:1:0 - HL-DT-ST DVDRAM GSA-4167B DL13 [E] (Ide)
05/02/2008 4:38:17 PM info New media inserted. Burning layer is ready to write
05/02/2008 4:37:39 PM info Current Drive selected : 0:1:0 - HL-DT-ST DVDRAM GSA-4167B DL13 [E] (Ide)
05/02/2008 4:37:39 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
05/02/2008 4:37:39 PM info User default language : 4105 (0x1009h) - English (Canadian)
05/02/2008 4:37:39 PM info System default language : 4105 (0x1009h) - English (Canadian)
05/02/2008 4:37:39 PM info DLL Version 2.1.5.335
05/02/2008 4:37:39 PM info DLL C:\Program Files\DVDFab Platinum 4\vso_hwe.dll
05/02/2008 4:37:39 PM info Version 4, 0, 5, 5
05/02/2008 4:37:39 PM info ExeName : "C:\Program Files\DVDFab Platinum 4\DVDFabPlatinum.exe"
05/02/2008 4:37:39 PM info OS : Personal (Build 6000)
05/02/2008 4:37:38 PM info ******************** Report session started ********************