Successful Nero burn logs

When I am done I will have posted 5 Nero burn logs, burned & verified with 5 different drives. This is not to show off but maybe to give people a guideline, because I see a whole pile of people who have problems burning with Nero. Now others may have successful logs with more stuff than I do going on, so I invite them to post them here. Don’t look & say, oh well I have Nero 7 & this is Nero 6.6 updated all the way, or these are different drives. Take a look at the general principles, programs kept updated, drives kept updated, not a whole lot of memory in use, good media like Verbatim or Taiyo Yuden, which until you learn the proper burn speed, burn at half the maximum rated speed of the disc, Not having a whole bunch of crap that is not necessary & might be interfering with your project. I will admit that normally I burn ISOs with ImgBurn, but decided to do these tonight with Nero because of the amount of posts I see of people having problems with this program. Just trying to help.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <LITE-ON DVDRW LH-20A1S> Version: 9L08 - HA 1 TA 3 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL12 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD080HJ atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 7H500F0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1S atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 08.0 iteatapi Port 4 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S162LTS08 iteatapi Port 4 ID 1 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182DSB06 iteatapi Port 4 ID 2 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10N JL12 iteatapi Port 4 ID 3 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S D: CDRom3
TSSTcorp CD/DVDW SH-S162L F: CDRom0
TSSTcorp CD/DVDW SH-S182D G: CDRom1
HL-DT-ST DVDRAM GSA-H10N H: CDRom2

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.7.2007
Burn DVD Image
5:18:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:18:09 PM #2 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

5:18:09 PM #3 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1841993 (409:19.68, 3597MB)

5:18:09 PM #4 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

5:18:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: LITE-ON DVDRW LH-20A1S, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:18:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:18:09 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1841994 (1841994) = #1841994/409:19.69
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1841994 blocks [LITE-ON DVDRW LH-20A1S ]
--------------------------------------------------------------

5:18:09 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [LITE-ON DVDRW LH-20A1S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3772403712, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1841994 | lead-out | 1 | 0x41 | 0x00

5:18:09 PM #9 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:18:09 PM #10 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)

5:18:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:18:09 PM #12 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7…Nr…c…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

5:18:10 PM #13 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

5:24:31 PM #14 Text 0 File WriterStatus.cpp, Line 113
<LITE-ON DVDRW LH-20A1S > start writing Lead-Out at LBA 1841994 (1C1B4Ah), length 0 blocks

5:25:01 PM #15 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11,080 KB/s)

5:25:01 PM #16 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

5:29:23 PM #17 Phase 80 File dlgbrnst.cpp, Line 1685
Data verification completed successfully

5:29:24 PM #18 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

5:29:30 PM #19 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

5:29:30 PM #20 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.27a, size=20576 bytes, created 1/26/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB06 - HA 1 TA 1 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL12 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD080HJ atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 7H500F0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1S atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 08.0 iteatapi Port 4 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S162LTS08 iteatapi Port 4 ID 1 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182DSB06 iteatapi Port 4 ID 2 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10N JL12 iteatapi Port 4 ID 3 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S D: CDRom3
TSSTcorp CD/DVDW SH-S162L F: CDRom0
TSSTcorp CD/DVDW SH-S182D G: CDRom1
HL-DT-ST DVDRAM GSA-H10N H: CDRom2

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.7.2007
Burn DVD Image
6:09:42 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:09:42 PM #2 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

6:09:42 PM #3 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286008 (508:00.08, 4464MB)

6:09:42 PM #4 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

6:09:42 PM #5 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S182D, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

6:09:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:09:42 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286009 (2286009) = #2286009/508:0.9
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286009 blocks [TSSTcorp CD/DVDW SH-S182D]
--------------------------------------------------------------

6:09:42 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S182D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681746432, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286009 | lead-out | 1 | 0x41 | 0x00

6:09:42 PM #9 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:09:42 PM #10 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)

6:09:42 PM #11 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x032b7180: Len x4000

6:09:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:09:42 PM #13 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:09:42 PM #14 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:09:42 PM #15 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:09:42 PM #16 Text 0 File DVDR.cpp, Line 7421
Drive: TSSTcorp CD/DVDW SH-S182D
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

6:09:42 PM #17 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM

6:09:42 PM #18 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

6:17:47 PM #19 Text 0 File WriterStatus.cpp, Line 113
<TSSTcorp CD/DVDW SH-S182D> start writing Lead-Out at LBA 2286009 (22E1B9h), length 0 blocks

6:18:14 PM #20 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11,080 KB/s)

6:18:14 PM #21 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

6:24:56 PM #22 Phase 80 File dlgbrnst.cpp, Line 1685
Data verification completed successfully

6:24:57 PM #23 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:25:01 PM #24 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

6:25:01 PM #25 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.27a, size=20576 bytes, created 1/26/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <PLEXTOR DVDR PX-716A> Version: 1.11 - HA 1 TA 4 - 6.6.1.15
Adapter driver: <USB 2.0> HA 1
Drive buffer : 8192kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL12 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD080HJ atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 7H500F0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1S atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 08.0 iteatapi Port 4 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S162LTS08 iteatapi Port 4 ID 1 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182DSB06 iteatapi Port 4 ID 2 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10N JL12 iteatapi Port 4 ID 3 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S D: CDRom3
TSSTcorp CD/DVDW SH-S162L F: CDRom0
TSSTcorp CD/DVDW SH-S182D G: CDRom1
HL-DT-ST DVDRAM GSA-H10N H: CDRom2
PLEXTOR DVDR PX-716A J: CDRom4

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.7.2007
Burn DVD Image
6:28:47 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:28:48 PM #2 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

6:28:48 PM #3 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286016 (508:00.16, 4464MB)

6:28:48 PM #4 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

6:28:48 PM #5 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

6:28:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:28:48 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286017 (2286017) = #2286017/508:0.17
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286017 blocks [PLEXTOR DVDR PX-716A ]
--------------------------------------------------------------

6:28:48 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681762816, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286017 | lead-out | 1 | 0x41 | 0x00

6:28:48 PM #9 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:28:48 PM #10 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)

6:28:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:28:48 PM #12 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7…Nr…c…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

6:28:48 PM #13 Text 0 File DVDR.cpp, Line 5998
Drive: PLEXTOR DVDR PX-716A
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

6:28:48 PM #14 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM

6:28:48 PM #15 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

6:28:50 PM #16 Text 0 File Cdrdrv.cpp, Line 1224
18:28:50.140 - J: PLEXTOR DVDR PX-716A : Queue again later

6:36:27 PM #17 Text 0 File WriterStatus.cpp, Line 113
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 2286017 (22E1C1h), length 0 blocks

6:36:47 PM #18 Text 0 File DVDR.cpp, Line 5998
Drive: PLEXTOR DVDR PX-716A
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

6:36:47 PM #19 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11,080 KB/s)

6:36:47 PM #20 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

6:50:24 PM #21 Phase 80 File dlgbrnst.cpp, Line 1685
Data verification completed successfully

6:50:25 PM #22 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:50:29 PM #23 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

6:50:29 PM #24 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.27a, size=20576 bytes, created 1/26/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL12 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD080HJ atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 7H500F0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1S atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 08.0 iteatapi Port 4 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S162LTS08 iteatapi Port 4 ID 1 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182DSB06 iteatapi Port 4 ID 2 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10N JL12 iteatapi Port 4 ID 3 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S D: CDRom3
TSSTcorp CD/DVDW SH-S162L F: CDRom0
TSSTcorp CD/DVDW SH-S182D G: CDRom1
HL-DT-ST DVDRAM GSA-H10N H: CDRom2

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.7.2007
Burn DVD Image
5:35:42 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:35:42 PM #2 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

5:35:43 PM #3 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286010 (508:00.10, 4464MB)

5:35:43 PM #4 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

5:35:43 PM #5 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:35:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:35:43 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286011 (2286011) = #2286011/508:0.11
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286011 blocks [HL-DT-ST DVDRAM GSA-H10N ]
--------------------------------------------------------------

5:35:43 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681750528, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286011 | lead-out | 1 | 0x41 | 0x00

5:35:43 PM #9 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:35:43 PM #10 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)

5:35:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:35:43 PM #12 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7…Nr…c…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

5:35:43 PM #13 Text 0 File DVDR.cpp, Line 5715
Drive: HL-DT-ST DVDRAM GSA-H10N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

5:35:43 PM #14 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM

5:35:43 PM #15 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

5:43:19 PM #16 Text 0 File WriterStatus.cpp, Line 113
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2286011 (22E1BBh), length 0 blocks

5:43:40 PM #17 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11,080 KB/s)

5:43:40 PM #18 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

5:43:43 PM #19 SPTI -1064 File SCSIPassThrough.cpp, Line 178
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0xB6 00 00 00 00 00 00 00 00 00 1C 00
Sense Area: 0xF0 00 05 00 23 05 3F 10 B6 00 00 0E 21
Buffer x0295b380: Len x1c
0x00 00 00 00 00 00 00 00 00 23 05 3F 00 00 FF FF
0x00 00 03 E8 00 00 40 EC 00 00 03 E8

5:48:34 PM #20 Phase 80 File dlgbrnst.cpp, Line 1685
Data verification completed successfully

5:48:35 PM #21 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

5:48:41 PM #22 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

5:48:41 PM #23 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.27a, size=20576 bytes, created 1/26/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15

Recorder: <TSSTcorp CD/DVDW SH-S162L>Version: TS08 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL12 - HA 1 TA 2 - 6.6.1.15
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG HD080HJ atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 7H500F0 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1S atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD3200JB-00KFA0 08.0 iteatapi Port 4 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S162LTS08 iteatapi Port 4 ID 1 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182DSB06 iteatapi Port 4 ID 2 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10N JL12 iteatapi Port 4 ID 3 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S D: CDRom3
TSSTcorp CD/DVDW SH-S162L F: CDRom0
TSSTcorp CD/DVDW SH-S182D G: CDRom1
HL-DT-ST DVDRAM GSA-H10N H: CDRom2

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.7.2007
Burn DVD Image
5:50:59 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:51:00 PM #2 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media

5:51:00 PM #3 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286010 (508:00.10, 4464MB)

5:51:00 PM #4 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

5:51:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: TSSTcorp CD/DVDW SH-S162L, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:51:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:51:00 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286011 (2286011) = #2286011/508:0.11
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286011 blocks [TSSTcorp CD/DVDW SH-S162L]
--------------------------------------------------------------

5:51:00 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [TSSTcorp CD/DVDW SH-S162L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681750528, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286011 | lead-out | 1 | 0x41 | 0x00

5:51:00 PM #9 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:51:00 PM #10 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)

5:51:00 PM #11 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x032b7180: Len x4000

5:51:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:51:00 PM #13 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

5:51:00 PM #14 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

5:51:00 PM #15 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 …YUDEN000T02.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

5:51:00 PM #16 Text 0 File DVDR.cpp, Line 7421
Drive: TSSTcorp CD/DVDW SH-S162L
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

5:51:00 PM #17 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM

5:51:00 PM #18 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

5:58:55 PM #19 Text 0 File WriterStatus.cpp, Line 113
<TSSTcorp CD/DVDW SH-S162L> start writing Lead-Out at LBA 2286011 (22E1BBh), length 0 blocks

5:59:20 PM #20 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11,080 KB/s)

5:59:20 PM #21 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started

6:06:02 PM #22 Phase 80 File dlgbrnst.cpp, Line 1685
Data verification completed successfully

6:06:03 PM #23 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:06:07 PM #24 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed

6:06:07 PM #25 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.27a, size=20576 bytes, created 1/26/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Not sure that this will be helpful quite honestly , but if you insist on doing this can you please wrap code tags around the logs.

With the amount of people around here having problems burning with Nero & from what I have seen, not many of them being solved having some type of guideline to match up their error log to, not be helpful? Maybe just one person looks at their error log, then mine or somebody else’s & finds something that they have & I or somebody else doesn’t, gets rid of it & has a successful burn, “just one”. When I say not being solved, I do not mean through a lack of effort by the people trying. I tell you what, I will make it easy for you, delete the thread.

I notice one interesting thing in the log for the first Samsung burn (in fact, both Samsung burns).

I get the same (KEY_ILLEGAL_REQUEST) thing with my Samsung SH-S182D, but like yours my burns are successful. Strange. :slight_smile:

You made me take a closer look. I only changed over to that iteatapi controller yesterday & I noticed although successful, all three drives on it had Nero errors of one form or the other. The 2 Samsungs, (Nero Error-1066) before burning & the LG, (Nero Error-1064) during verification. I am hoping to get off that controller by installing a card next week with 4 SATA ports & 2 IDE. To top it all off, Nero did not change the booktype on the LiteON burn.