Successful Burn logs

Could someone or several people who have success burning Nero recode at max speed post some successful burn logs here? Everything I’ve run besides the actual burn process indicates that my drive should be burning at max speed but it won’t.

Best if you use CD-DVD Speed (Nero toolkit) and with a blank disk in use the disc info tab & post the results back here.

If you’re getting a true burn speed of 4x or less then maybe DMA is not correctly enabled in which case this thread maybe helpful.

Nero CD-DVD Speed: Disc Info
Basic Information
Disc type: : DVD-R
Book Type : DVD-R
Manufacturer: : Ritek
MID : RITEKF1
Write speeds: : 2 X - 4 X - 6 X - 8 X - 12 X - 16 X - 18 X
Blank Capacity : 4.38 GB
: 4489 MB
: 4707321856 bytes
Extended Information
Layers : 1
Usage : General
Copyright protection : n/a
Recorder information
Disc Status : Empty
Raw Data
Pre-recorded Information in Lead-in (0Eh)
0000 - 01 40 C1 FD 9E D8 52 00 02 87 0D 13 87 88 90 00 - .@…R…
0010 - 03 52 49 54 45 4B 46 00 04 31 00 00 00 00 00 00 - .RITEKF…1…
0020 - 05 88 80 00 00 00 02 00 F0 FF FF FF 20 53 18 00 - …S…
0030 - EC 08 11 00 5D 8E 41 77 04 00 00 00 E4 08 11 00 - …].Aw…
0040 - 00 C0 41 7E 00 80 00 00 04 09 11 00 7D 3F 41 77 - …A~…}?Aw
0050 - 00 80 00 00 66 03 02 00 FC FF FF FF 00 00 00 00 - …f…
0060 - 01 00 00 00 20 53 18 00 38 09 11 00 00 00 15 00 - …S…8…

I ran a transfer rate test and got the following results:

Start: 7.61x
Speed: 8-18x CAV (13.64x average)
End: 18.23x

I just burned a DVD using the same disk I tested with DVD/CD Speed. Here is the log:

********** Nero Recode **********

Version: 2.4.5.0

Project type: Main Movie to DVD
Compilation name: HAPPY_GILMORE
Target size: DVD5 (2282925)

04:57:23 File LangStreamPatcher.cpp, Line 56
Command table patching started…

04:57:23 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!

Burn settings:
Target: LITE-ON DVDRW LH-20A1S
Number of copies: 1
Write speed: 0 KB/s
Temp folder: E:\Documents and Settings\Wootang\My Documents\Nero Recode\VIDEO_TS (26056323072 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD R DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

04:57:34 File burn_dvdfiles.cpp, Line 238
Compile DVD: init

VTS_01 Title Vobs [10926 vobus] 5959.63MB -> 4458.71MB [R 0.72]
Video: 4132.64MB, extra: 326.07MB
Audio: 4 streams
0. 0. Dolby Digital 5.1-ch English 297.89MB [enabled]

    1. DTS 5.1-ch English 502.25MB [disabled]
    1. Dolby Digital 2-ch Spanish 127.67MB [disabled]
    1. Dolby Digital 2-ch French 127.67MB [disabled]
      Subpicture: 3 streams
    1. English 6.84MB [enabled]
    1. Spanish 3.44MB [disabled]
    1. French 4.27MB [disabled]

04:57:34 File burn_dvdfiles.cpp, Line 1244
Compile DVD: begin copy 1

04:57:34 File NeroRecorderBase.cpp, Line 517
Writing to disc: D

04:57:34 File NeroRecorderBase.cpp, Line 531
Free capacity on disc: 2286467 sectors (2298496)

04:58:05 File burn_dvdfiles.cpp, Line 548
Compile DVD: burning 2286467 sectors (2282925 required)

04:58:05 File burn_dvdfiles.cpp, Line 744
Compile DVD: adjust target size to 4465.76MB (4465.76MB obtained)

04:58:05 File burn_dvdfiles.cpp, Line 594
Compiling DVD Volume started

04:58:15 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_1.VOB 96

05:13:26 File burn_dvdfiles.cpp, Line 1150
Compile DVD: finished VTS_01 Title Vobs

VTS_01 Title Vobs:
Original 5959.63MB -> Expected 4465.63MB -> Output 4465.56MB
Finished error -0.07MB
Ratio encoded = 10911
Original encoded = 15
Slide encoded = 0
StillImage encoded = 0
Output extra size = 326.12MB
Source video size = 4863.62MB
Pictures Modified [I 7976] [P 221] [B 87971]

05:13:36 File dvd_record.cpp, Line 424
DirectBurn offset: VTS_01_0.IFO 48

05:13:46 File burn_dvdfiles.cpp, Line 617
Compile DVD: completed successfuly (4465.69MB)

----- Begin NeroAPI error log -----

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 9:20:56 PM
ahead WinASPI: File ‘E:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.7.5.1
Using interface version: 7.0.5.6
Installed in: E:\Program Files\Nero\Nero 7\Core
Application: Ahead\Nero Recode
Internal Version: 7, 7, 5, 1

Recorder: <LITE-ON DVDRW LH-20A1S> Version: 9L03 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1S 9L03 viamraid Port 3 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y060M0 YAR5 viamraid Port 3 ID 2 DMA: Off

=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom1
Generic DVD-ROM F: CDRom2
LITE-ON DVDRW LH-20A1S G: CDRom0
IOMEGA CDRW23042EXT3-B H: CDRom3

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 720MB (738008kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2007
NeroAPI
4:57:34 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

4:57:34 AM #2 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)

4:57:34 AM #3 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO

4:57:34 AM #4 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: LITE-ON DVDRW LH-20A1S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

4:57:34 AM #5 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:57:54 AM #6 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Access is denied.

4:57:54 AM #7 Text 0 File SCSIPTICommands.cpp, Line 277
SPTI - Error on DismountVolue: Access is denied.

4:58:04 AM #8 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Access is denied.

4:58:05 AM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1028
Estimated filesystem size: 544

4:58:05 AM #10 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 2x (2,770 KB/s)

4:58:15 AM #11 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode for Multisession

4:58:15 AM #12 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: No

4:58:15 AM #13 Text 0 File Cdrdrv.cpp, Line 9285
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

4:58:15 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 689
Reserved fragment at 0. Length: 592

4:58:15 AM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1910
Reserved start fragment at 0

4:58:15 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 689
Reserved fragment at 592. Length: 48

4:58:15 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_1.VOB at sector 640

5:01:47 AM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)

5:01:47 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2304
Added extra file VTS_01_2.VOB

5:01:47 AM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_2.VOB at sector 524927

5:04:33 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)

5:04:33 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2304
Added extra file VTS_01_3.VOB

5:04:33 AM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_3.VOB at sector 1049214

5:08:31 AM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors)

5:08:31 AM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2304
Added extra file VTS_01_4.VOB

5:08:31 AM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_4.VOB at sector 1573501

5:12:21 AM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VTS_01_4.VOB of size 1073739776 bytes (524287 sectors)

5:12:21 AM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2304
Added extra file VTS_01_5.VOB

5:12:21 AM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_5.VOB at sector 2097788

5:13:36 AM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VTS_01_5.VOB of size 387518464 bytes (189218 sectors)

5:13:36 AM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_0.BUP at sector 2287006

5:13:36 AM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VTS_01_0.BUP of size 61440 bytes (30 sectors)

5:13:42 AM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 1427
Writing VTS_01_0.IFO at sector 592

5:13:46 AM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 2673
Successfully released fragment at 592

5:13:46 AM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VTS_01_0.IFO of size 61440 bytes (30 sectors)

5:13:46 AM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 1433
Buffering VIDEO_TS.IFO

5:13:46 AM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 2635
Finished buffering file VIDEO_TS.IFO of size 6144 bytes (3 sectors)

5:13:46 AM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VIDEO_TS.IFO of size 6144 bytes (3 sectors)

5:13:46 AM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 1433
Buffering VIDEO_TS.BUP

5:13:46 AM #40 Text 0 File BurnAtOnceRecorder.cpp, Line 2635
Finished buffering file VIDEO_TS.BUP of size 6144 bytes (3 sectors)

5:13:46 AM #41 Text 0 File BurnAtOnceRecorder.cpp, Line 2693
Finished writing file VIDEO_TS.BUP of size 6144 bytes (3 sectors)

5:13:46 AM #42 Phase 175 File APIProgress.cpp, Line 285
Finalizing disc started

5:13:46 AM #43 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

5:13:46 AM #44 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

5:13:46 AM #45 Text 0 File BurnAtOnceRecorder.cpp, Line 3335
Writing filesystem of size 1114112 at sector 0

5:13:50 AM #46 Text 0 File BurnAtOnceRecorder.cpp, Line 3018
Writing VIDEO_TS.IFO at sector 544

5:13:50 AM #47 Text 0 File BurnAtOnceRecorder.cpp, Line 3046
Writing VIDEO_TS.BUP at sector 560

5:14:31 AM #48 Phase 177 File APIProgress.cpp, Line 285
Disc finalized successfully

5:14:31 AM #49 Text 0 File SCSIPTICommands.cpp, Line 277
SPTI - Error on DismountVolue: Access is denied.

5:14:31 AM #50 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:14:31 AM #51 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

5:14:37 AM #52 Phase 37 File APIProgress.cpp, Line 285
Burn process completed successfully at 2x (2,770 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 8:53:02 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

----- End NeroAPI error log -----

05:14:37 File burn_dvdfiles.cpp, Line 308
Compile DVD: exit