Sony dru510a - burn problems

vbimport

#1

Hi All,
I recently added a Sony 510 to my system after my SCSi plextor died. I having a nightmare burning anything from diffrent applications, but different errors each time.

With Nero, v 5.5.10.42 I can burn data but just as the drive attempts to close the session it fails and ejects the disc, leaving the disc in an unusable state.

With EAC, I have had no luck either, when trying to burn the write offset detection file, the bar appears and stays at 1:25m to go, after about a minute and a half the disappears but the disk is blank, usable again though.

I can get the dru-510 1.0c upgrade to take, it just hangs when selecting upgrade.

I’ve tried using the latest adaptec ASPi drivers and the nero drivers, problems both ways.

I’ve included the log from a failed nero burn in case that show any possible clues.

thanks in advance for any suggestions
Ian

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=2.0.1.28, size=172099 bytes, created 07/06/2003 08:56:16
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 22:37:36
Nero Version: 5.5.10.42
Recorder: <SONY DVD RW DRU-510A> Version: 1.0a - HA 2 TA 1 - 5.5.10.42
Adapter driver: <> HA 2
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR CD-ROM PX-40TS> Version: 1.14 - HA 1 TA 1 - 5.5.10.42
Adapter driver: <aic78xx> HA 1
Bus Type : default (0) -> SCSI, detected: SCSI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-ROM PX-40TS 1.14 aic78xx Port 1 ID 1 DMA: ?
CdRomPeripheral : PLEXTOR CD-R PX-W124TS1.07 aic78xx Port 1 ID 2 DMA: ?

AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523552kB)
Free physical memory: 382MB (392056kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

4.7.2003
CD Copy
23:08:13 #1 Phase 94 File dlgbrnst.cpp, Line 1655
Power-Burn activated

23:08:13 #2 Text 0 File Reader.cpp, Line 115
Reader running

23:08:13 #3 Phase 48 File dlgbrnst.cpp, Line 1655
Analyzing CD

23:08:13 #4 CDCOPY -1 File CDCopy.cpp, Line 2203
The CD is copyrighted

23:08:14 #5 Text 0 File CDCopy.cpp, Line 2448
Index0 Index1 PostPause __LastBlockOfTrack
Track 1: 0 0 ( 0:02.00) 23997 23996 ( 5:21.71)
Track 2: 23997 23997 ( 5:21.72) 43200 43199 ( 9:37.74)
Track 3: 43200 43200 ( 9:38.00) 76182 76181 ( 16:57.56)
Track 4: 76182 76182 ( 16:57.57) 90180 90179 ( 20:04.29)
Track 5: 90180 90180 ( 20:04.30) 107907 107906 ( 24:00.56)
Track 6: 107907 107907 ( 24:00.57) 146825 146824 ( 32:39.49)
Track 7: 146825 146825 ( 32:39.50) 168367 168366 ( 37:26.66)
Track 8: 168367 168367 ( 37:26.67) 192850 192849 ( 42:53.24)
Track 9: 192850 192850 ( 42:53.25) 214637 214636 ( 47:43.61)
Track 10: 214637 214637 ( 47:43.62) 234890 234889 ( 52:13.64)
Track 11: 234890 234890 ( 52:13.65) 265380 265379 ( 59:00.29)

23:08:14 #6 Text 0 File CDCopy.cpp, Line 852
Copy options: read subcode: ON jitter correction: OFF
read ISRC/MCN: OFF ignore inv. TOC type: OFF ignore audio read error: ON
source disc does not look like CD Extra
01. 0 - 23997 = 23997, audio (TRM_AUDIO_NOPRE, block size 2352)
02. 23997 - 43200 = 19203, audio (TRM_AUDIO_NOPRE, block size 2352)
03. 43200 - 76182 = 32982, audio (TRM_AUDIO_NOPRE, block size 2352)
04. 76182 - 90180 = 13998, audio (TRM_AUDIO_NOPRE, block size 2352)
05. 90180 - 107907 = 17727, audio (TRM_AUDIO_NOPRE, block size 2352)
06. 107907 - 146825 = 38918, audio (TRM_AUDIO_NOPRE, block size 2352)
07. 146825 - 168367 = 21542, audio (TRM_AUDIO_NOPRE, block size 2352)
08. 168367 - 192850 = 24483, audio (TRM_AUDIO_NOPRE, block size 2352)
09. 192850 - 214637 = 21787, audio (TRM_AUDIO_NOPRE, block size 2352)
10. 214637 - 234890 = 20253, audio (TRM_AUDIO_NOPRE, block size 2352)
11. 234890 - 265380 = 30490, audio (TRM_AUDIO_NOPRE, block size 2352)

23:08:14 #7 Text 0 File CDCopy.cpp, Line 892
drive reads subcode, new audio code => scan indices

23:08:51 #8 Text 0 File Burncd.cpp, Line 3745
Turn on Disc-At-Once, using CD-R/RW media

23:08:51 #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_AUDIO_NOPRE (1 Audio)
2 indices, index0 (150) not provided
original CD pos #0 + 23997 (23997) = #23997/5:19.72
relocatable, CD pos for caching/writing not required/not required, no patch infos
1: TRM_AUDIO_NOPRE (2 Audio)
2 indices, index0 (0) provided
original CD pos #23997 + 19203 (19203) = #43200/9:36.0
relocatable, CD pos for caching/writing not required/not required, no patch infos
2: TRM_AUDIO_NOPRE (3 Audio)
2 indices, index0 (0) provided
original CD pos #43200 + 32982 (32982) = #76182/16:55.57
relocatable, CD pos for caching/writing not required/not required, no patch infos
3: TRM_AUDIO_NOPRE (4 Audio)
2 indices, index0 (0) provided
original CD pos #76182 + 13998 (13998) = #90180/20:2.30
relocatable, CD pos for caching/writing not required/not required, no patch infos
4: TRM_AUDIO_NOPRE (5 Audio)
2 indices, index0 (0) provided
original CD pos #90180 + 17650 (17650) = #107830/23:57.55
relocatable, CD pos for caching/writing not required/not required, no patch infos
5: TRM_AUDIO_NOPRE (6 Audio)
2 indices, index0 (77) provided
original CD pos #107907 + 38918 (38918) = #146825/32:37.50
relocatable, CD pos for caching/writing not required/not required, no patch infos
6: TRM_AUDIO_NOPRE (7 Audio)
2 indices, index0 (0) provided
original CD pos #146825 + 21542 (21542) = #168367/37:24.67
relocatable, CD pos for caching/writing not required/not required, no patch infos
7: TRM_AUDIO_NOPRE (8 Audio)
2 indices, index0 (0) provided
original CD pos #168367 + 24483 (24483) = #192850/42:51.25
relocatable, CD pos for caching/writing not required/not required, no patch infos
8: TRM_AUDIO_NOPRE (9 Audio)
2 indices, index0 (0) provided
original CD pos #192850 + 21787 (21787) = #214637/47:41.62
relocatable, CD pos for caching/writing not required/not required, no patch infos
9: TRM_AUDIO_NOPRE (10 Audio)
2 indices, index0 (0) provided
original CD pos #214637 + 20253 (20253) = #234890/52:11.65
relocatable, CD pos for caching/writing not required/not required, no patch infos
10: TRM_AUDIO_NOPRE (11 Audio)
2 indices, index0 (0) provided
original CD pos #234890 + 30490 (30490) = #265380/58:58.30
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

23:08:57 #10 Phase 40 File dlgbrnst.cpp, Line 1655
Aborted by user

23:08:57 #11 Text 0 File DlgWaitCD.cpp, Line 225
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 530322 (117:52.72)

23:08:57 #12 Text 0 File DlgWaitCD.cpp, Line 230
Write in overburning mode: FALSE

23:08:57 #13 Text 0 File DlgWaitCD.cpp, Line 1700
Recorder: SONY DVD RW DRU-510A;
CD type reading failed
ATIP Data: ?

23:08:57 #14 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

23:09:08 #15 SCSI -500 File Cdrdrv.cpp, Line 1239
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0001), size=17005 bytes, created 14/08/2002 15:03:36
File ‘Drivers\aic78xx.sys’: Ver=v3.60a (Lab01_N.010510-0033), size=56960 bytes, created 29/08/2002 13:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Try change ide to PIO and see if it help, next thing you can try is put the jumper to cable select.