Sony DRU-840A SS01 will not Burn DVD in DMA Mode

My new DRU-840A SS01 does not recognize Memorex DVD+R or Memorex DVD+R DL media. I changed the secondary IDE channel to PI0 from Ultra-2 DMA and it burns the media fine now but very slowly.

Hi,

at first, keep in mind that Memorex is not considered as quality media.

Secondly, if I remember correctly, then these Sony branded Samsung drives are [B]UDMA 4[/B] units. So it is mandatory to use an 80wired IDE cable, device manager should show UDMA 4 instead of UDMA 2.

Your issue might be related to an unsufficient IDE cable.

Michael

Thanks, that did the trick. I now have two secondary IDE channels one DMA4 and one DMA5. I burned one DVD folder perfectly on Memorex DL and then the next one failed and I got a coaster. I tried the same folder again and it burned the DVD perfectly.

The trouble started when I ordered 40 Memorex DL and 100 Memorex DVD+R such a good deal! I remembered the old commercials, "Is it real or is it Memorex, they used to have a great reputation in sound recording.

Hi,[quote=BlaineIII;2027016]Thanks, that did the trick.[/quote]You’re Welcome :slight_smile:

I remembered the old commercials, "Is it real or is it Memorex, they used to have a great reputation in sound recording.
These days are gone. Memorex optical media is average at best :frowning:

Michael

[QUOTE=mciahel;2027023]Hi,You’re Welcome :slight_smile:
These days are gone. Memorex optical media is average at best :frowning:

Michael[/QUOTE]

Now it gives Error=116 and kicks the Memorex DVD+R DL out with just a small percentage of the disc burned, (and ruined). I tried MAIN movie with a Memorex DVD+R RW and it burned and played fine.

Tiger direct did replace a bunch of Memorex DVD+R before when I was having problems…but the new ones give the same problems…one movie will burn fine then the next one gives me a coaster, fortunately or unfortunately the Memorex DVD+R DL are almost gone, but I have a set of 20 coasters now!

Time to buy quality DL: Verbatim.

@ BlaineIII,

Memorex Media is not noted for quality error free results and Memorex DL Media is even worse.

If you desire consistent quality error free DL Burning results Verbatim MKM001/MKM003 Mitsubishi Kagaku Media is the only DL Media that can provide this results.

Throw ALL of your garbage Memorex Media away and only use known proven quality Media such as Taiyo Yuden or Verbatim Media. Tiger Direct isn’t the best place to purchase Media. Rima.Com (http://rima.com) is an excellent source for Taiyo Yuden Media which in many circles is considered top of the line quality proven Media.

Regards,
bjkg

[QUOTE=bjkg;2028549]@ BlaineIII,

Memorex Media is not noted for quality error free results and Memorex DL Media is even worse.

If you desire consistent quality error free DL Burning results Verbatim MKM001/MKM003 Mitsubishi Kagaku Media is the only DL Media that can provide this results.

Throw ALL of your garbage Memorex Media away and only use known proven quality Media such as Taiyo Yuden or Verbatim Media. Tiger Direct isn’t the best place to purchase Media. Rima.Com (http://rima.com) is an excellent source for Taiyo Yuden Media which in many circles is considered top of the line quality proven Media.

Regards,
bjkg[/QUOTE]

I just ruined TWO Verbatim 2.4xDVD+ DL discs trying to burn a DVD folder, one using Nero 7 and the other using DVDFAB Platinum, I burned a DVD folder small enough to fit in a regular Memorex DVD+R successfully

Here is the Nero log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 4:54:32 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <SONY DVD RW DRU-840A> Version: SS01 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD RW DRU-840A >Version: SS01 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3320620AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-840A atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-840A D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 16 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.5.2008
UDF/ISO compilation
4:06:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started

4:06:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)

4:06:42 PM #3 Text 0 File Isodoc.cpp, Line 6424
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:06:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted

4:06:42 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

4:06:42 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

4:06:42 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-840A running

4:06:42 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:06:42 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:06:42 PM #10 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

4:06:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3825551 (850:07.26, 7471MB)

4:06:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

4:06:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-840A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

4:06:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:06:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3825552 (3825552) = #3825552/850:7.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3825552 blocks [D: SONY DVD RW DRU-840A]
--------------------------------------------------------------

4:06:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-840A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7834730496, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3825552 | lead-out | 1 | 0x41 | 0x00

4:06:43 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:06:43 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:06:43 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

4:06:43 PM #20 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

4:06:43 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

4:06:43 PM #22 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started

4:06:43 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:08:03 PM #24 Text 0 File WriterStatus.cpp, Line 116
<D: SONY DVD RW DRU-840A> start writing Lead-Out at LBA 3825552 (3A5F90h), length 0 blocks

4:08:03 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:08:04 PM #26 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 69.1x (95,358 KB/s)

4:08:04 PM #27 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

4:08:04 PM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0561b200: Len x4000

4:08:04 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:08:49 PM #30 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0c72a200: Len x804

4:08:49 PM #31 Text 0 File DVDPlusDualLayer.cpp, Line 636
L0 Data Zone Capacity set to 1912944 (1D3070h, 3736MB) -> OK, confirmed setting

4:08:49 PM #32 CDR -1205 File DVDPlusDualLayer.cpp, Line 663
Burning Layer 1

4:08:49 PM #33 Text 0 File DVDPlusDualLayer.cpp, Line 673
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

4:08:49 PM #34 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MKM…
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16…63]:
00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 …MKM…001.@
25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7…/c./c!#…
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 …!#…

4:08:49 PM #35 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

4:20:53 PM #36 CDR -1206 File DVDPlusDualLayer.cpp, Line 1948
Burning Layer 2

4:20:53 PM #37 Text 0 File DVDPlusDualLayer.cpp, Line 1959
Perform layer 1 to 2 jump before writing at address 1912944 (1D3070h)

4:20:54 PM #38 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1D 33 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04c60000: Len x10000
0x00 00 01 BA 45 DF F4 29 BC 0F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 20 9F 25 D8 B7 11 06 A5 60
0x50 F3 11 2A 88 F6 4C 21 46 EB 88 FE 0B AB A1 A1

4:20:54 PM #39 CDR -1135 File Writer.cpp, Line 302
Write error
D: SONY DVD RW DRU-840A

4:20:54 PM #40 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:20:54 PM #41 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:23:25 PM #42 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 10/18/2006 5:00:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 2:34:04 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 5, size=29568 bytes, created 4/5/2006 2:34:22 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 5, size=8832 bytes, created 4/5/2006 2:34:56 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[QUOTE=bjkg;2028549]@ BlaineIII,

Memorex Media is not noted for quality error free results and Memorex DL Media is even worse.

If you desire consistent quality error free DL Burning results Verbatim MKM001/MKM003 Mitsubishi Kagaku Media is the only DL Media that can provide this results.

Throw ALL of your garbage Memorex Media away and only use known proven quality Media such as Taiyo Yuden or Verbatim Media. Tiger Direct isn’t the best place to purchase Media. Rima.Com (http://rima.com) is an excellent source for Taiyo Yuden Media which in many circles is considered top of the line quality proven Media.

Regards,
bjkg[/QUOTE]

I just ruined TWO Verbatim 2.4xDVD+ DL discs trying to burn a DVD folder, one using Nero 7 and the other using DVDFAB Platinum, I burned a DVD folder small enough to fit in a regular Memorex DVD+R successfully

Here is the Nero log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 4:54:32 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <SONY DVD RW DRU-840A> Version: SS01 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD RW DRU-840A >Version: SS01 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V200E0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3320620AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-840A atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-840A D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 16 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.5.2008
UDF/ISO compilation
4:06:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started

4:06:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)

4:06:42 PM #3 Text 0 File Isodoc.cpp, Line 6424
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:06:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted

4:06:42 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

4:06:42 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

4:06:42 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-840A running

4:06:42 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:06:42 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:06:42 PM #10 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

4:06:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3825551 (850:07.26, 7471MB)

4:06:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

4:06:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-840A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

4:06:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:06:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3825552 (3825552) = #3825552/850:7.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3825552 blocks [D: SONY DVD RW DRU-840A]
--------------------------------------------------------------

4:06:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-840A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7834730496, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3825552 | lead-out | 1 | 0x41 | 0x00

4:06:43 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:06:43 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:06:43 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

4:06:43 PM #20 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

4:06:43 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

4:06:43 PM #22 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started

4:06:43 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:08:03 PM #24 Text 0 File WriterStatus.cpp, Line 116
<D: SONY DVD RW DRU-840A> start writing Lead-Out at LBA 3825552 (3A5F90h), length 0 blocks

4:08:03 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:08:04 PM #26 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 69.1x (95,358 KB/s)

4:08:04 PM #27 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

4:08:04 PM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0561b200: Len x4000

4:08:04 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:08:49 PM #30 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0c72a200: Len x804

4:08:49 PM #31 Text 0 File DVDPlusDualLayer.cpp, Line 636
L0 Data Zone Capacity set to 1912944 (1D3070h, 3736MB) -> OK, confirmed setting

4:08:49 PM #32 CDR -1205 File DVDPlusDualLayer.cpp, Line 663
Burning Layer 1

4:08:49 PM #33 Text 0 File DVDPlusDualLayer.cpp, Line 673
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

4:08:49 PM #34 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MKM…
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16…63]:
00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 …MKM…001.@
25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7…/c./c!#…
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 …!#…

4:08:49 PM #35 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

4:20:53 PM #36 CDR -1206 File DVDPlusDualLayer.cpp, Line 1948
Burning Layer 2

4:20:53 PM #37 Text 0 File DVDPlusDualLayer.cpp, Line 1959
Perform layer 1 to 2 jump before writing at address 1912944 (1D3070h)

4:20:54 PM #38 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1D 33 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04c60000: Len x10000
0x00 00 01 BA 45 DF F4 29 BC 0F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 20 9F 25 D8 B7 11 06 A5 60
0x50 F3 11 2A 88 F6 4C 21 46 EB 88 FE 0B AB A1 A1

4:20:54 PM #39 CDR -1135 File Writer.cpp, Line 302
Write error
D: SONY DVD RW DRU-840A

4:20:54 PM #40 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:20:54 PM #41 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:23:25 PM #42 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 10/18/2006 5:00:00 AM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 2:34:04 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 5, size=29568 bytes, created 4/5/2006 2:34:22 PM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 5, size=8832 bytes, created 4/5/2006 2:34:56 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Where are the Verbatim disks made? India or Singapore?

If I may ask you to waste one more disc, can you burn the VIDEO_TS folder with ImgBurn [Build Mode]? If it issues an error, please post that log, too. :flower:

EDIT: Also, can you ensure that there is enough data for 2 layers’ worth of data? just enough to make ImgBurn try to burn to the second layer. It could be that Nero isn’t setting the layer break properly.

@BlaineIII,

Suggest not Burning your Media at Maximum Speed but Burning your Media at a speed slightly slower/lower than Maximum Speed.

Also suggest completely and thoroughly removing the N e r o InCD Packet Writing software program which has a well-documented history of causing numerous conflict Burning error problems.

Regards,
bjkg

As suggested, wipe Incd!

Also, to which controller is your burner connected?

CdRomPeripheral : SONY DVD RW DRU-840A atapi [B]Port 3 ID 0[/B] DMA: On

[QUOTE=Albert;2051712]Where are the Verbatim disks made? India or Singapore?

If I may ask you to waste one more disc, can you burn the VIDEO_TS folder with ImgBurn [Build Mode]? If it issues an error, please post that log, too. :flower:

EDIT: Also, can you ensure that there is enough data for 2 layers’ worth of data? just enough to make ImgBurn try to burn to the second layer. It could be that Nero isn’t setting the layer break properly.[/QUOTE]

Singapore. I burned the folder/files but it will not play in my DVD player. I cannot find a log, where does it normally deposit itself? It said it did not produce a menu DVD movie.It said something about burning an ISO/Joliet file but I see a dvd video folder but the vob files are OUTSIDE the folder on the dvd.

I do not want to delete INCD as all my DVD authoring and burning software will not operate when it is disabled, also I would loose my Nero 7 as INCD is part of that and there is no way to remove it serparately.

Yes, the DVD folders I am trying to burn are over 7 gigs.

@ BlaineIII,

Unfortunately you are incorrect and misinformed. With N e r o v7.2.0.3 you can selectively just remove the InCD Packet Writing software program. You do not need to totally remove the entire N e r o software package to remove the InCD Packet Writing software program and N e r o functions and operates just fine with the InCD Packet Writing software removed.

It should also be noted that the most current version of N e r o version 7 is version 7.11.6.0 which is available for download at ->

Regards,
bjkg

[QUOTE=bjkg;2052404]@ BlaineIII,

Unfortunately you are incorrect and misinformed. With N e r o v7.2.0.3 you can selectively just remove the InCD Packet Writing software program. You do not need to totally remove the entire N e r o software package to remove the InCD Packet Writing software program and N e r o functions and operates just fine with the InCD Packet Writing software removed.

It should also be noted that the most current version of N e r o version 7 is version 7.11.6.0 which is available for download at ->

Regards,
bjkg[/QUOTE]

Thank you, I did some research and found that technically you are correct and I had already tried to remove INCD but failed and this caused the secondary IDE channel to be disabled which caused the system to not recognize my DVD Burner. I did a system restore and corrected this problem. So I removed Nero 7 completely and burned two DVD folders successfully on Memorex DVD DL using PIO. I tried using DMA but again failed to burn the DVD on Memorex. I had found before that simply disabling the INCD would cause ALL DVD burners to fail to work. When INCD is installed I have to have it loaded in order to for ANY DVD burner to work, removing it solved the problem at least as long as I use PIO.

[QUOTE=Albert;2051712]Where are the Verbatim disks made? India or Singapore?

If I may ask you to waste one more disc, can you burn the VIDEO_TS folder with ImgBurn [Build Mode]? If it issues an error, please post that log, too. :flower:

EDIT: Also, can you ensure that there is enough data for 2 layers’ worth of data? just enough to make ImgBurn try to burn to the second layer. It could be that Nero isn’t setting the layer break properly.[/QUOTE]

I tried IMG Burn and burned the Video folder which left the files OUTSIDE the folder but the DVD will not play on my stand alone DVD player. It burned the DVD as an ISO/Joliet file at least that is what it said it was going to do. I could not find a log anywhere I did a search for logs and txt files, where is the log supposed to be and is it automatically recorded?

Yes I am using folders that over over 7 gigs, large enough for DL.

IMG Burn says it will NOT create a playable DVD in any case it is not designed for that.

I cannot remove the message so I just removed the body of the message

When dragging the Video_TS folder over, it should ask if you meant to burn as a video disc, and it should automatically make it compatible. If dragging and dropping the Video_TS folder itself doesn’t do that, try going up a level and drag-n-drop the folder that houses Video_TS.

I’ve done it before, and it worked swimmingly.

To get the log: Open up ImgBurn, select “View>>Log”. Save that. :wink:

If you want to continue to have problems then keep INCD but don’t complain. If you want help then get rid of INCD or you can continue to burn coasters it is up to you

@ BlaineIII,

In reference to your #15 posting it is clearly apparent that your present N e r o installation is causing problems. Until you correct your current N e r o installation problems you will continue to experience Burning problems.

Suggest thoroughly and completely removing your current N e r o installation by using the N e r o Clean Tool (http://www.nero.com/enu/support-nero7-tools-utilities.html) which is specifically designed by N e r o to correctly repair Windows Registry corruption error problems when an incorrect N e r o installation error problem occurs.

Then if you desire to continue to use N e r o v7 then install the most current up to date N e r o version 7.11.6.0 (http://www.nero.com/enu/downloads-nero7-update.php) paying close attention during the installation process not to install N e r o InCD or any other unnecessary bloated extraneous N e r o programs. During the N e r o installation process use the “Custom” option to selectively install only the specifically desired N e r o programs.

Once again until you properly correct Windows Registry corruption problems caused by an incorrect N e r o installation you will continue to experience Burning problems.

Regards,
bjkg