Sony CRX230E - write error

vbimport

#1

I’ve been using this drive without problems for over year, but a month ago, a burn failed half-way through and I haven’t been able to successfully write any CDR/RW’s ever since.

Originally, I was using Pinnacle Instant CD/DVD 7 (fully updated), the drive was already flashed to QYS3 about half a year ago. Here is the log from when the error happened:

Versions:
  Operating System: Windows 98 4.10 (Build 2222: A)
  InstantCopy:      7.0.3.142 (5/20/03 11:15:56 AM)
  InstantDisc:      7.0.1.061 (4/17/03 12:11:44 PM)
  CD-R Drivers:     6.4.3.113 (5/26/03 11:32:54 AM)
  ISO/UDF Creator:  1.0.2.035 (2/19/03 2:09:54 PM)
  ASAPI Interface:  5.0.0.002 (4/27/00 12:31:18 PM)
  ASAPI Driver:     5.1.0.002 (9/1/98 12:33:10 PM)

 Write speed: 4x CD (706 KB/s)
 Write method: Automatic(0)
 Closing method: Automatic
 Simulation: No Simulation
 [ ] Write to hard disk first
 [ ] Verify destination media after write

Destination Device:
 Sony CD-RW  CRX230E (F:) QYS3 MMC-Driver

Disc Contents:
 Nr  Length Pre Post Sectormode
  1 358,365 150    0 Mode 1 ISO

Project contents: 
 Datatrack
   File systems: ISO9660 Level 1; Joliet

Reading destination disc information ...
Creating table of contents...
Writing track 1 of 1 track(s)
Starting track 1...
Resetting destination device...
---------------------------------------------------------
An error occured while writing track 1 at position 247038.
---------------------------------------------------------
---------------------------------------------------------
Extended information:#1Device: Sony CD-RW  CRX230E (F:)
MEDIUM ERROR: WRITE ERROR
70 00 03 00 00 00 00 0A 00 00 00 00 0C 00
2A 00 00 03 C4 FE 00 00 1A 00


---------------------------------------------------------

I’ve updated my ASPI drivers and also switched to Nero, to check if it was a software problem, but that didn’t solve it.

I have tried different brands of media (Imation, Sony, Kodak, Philips, TDK) in both CDR and CDRW formats.

Simulations run fine, everytime writing fails either straight away or after 2-4% complete. Below, I’ve included a few writing logs from Nero as well as the infotool log:

Nero InfoTool 3.00

Drive Information
------------------
Drive                      : SAMSUNG  DVD-ROM SD-608  
Type                       : CD-ROM Drive
Firmware Version           : 1.1 
Buffer Size                : 512 KB
Date                       : ?
Serial Number
Vendor Specific            :  @ýo
Drive Letter               : D:\
Location                   : 0:0
Mechanism                  : Tray
Read Speed                 : 32  X
Write Speed                :  n/a

Read CD-R                  : Yes
Read CD-RW                 : Yes
Read DVD-ROM               : Yes
Read DVD-RAM               : No
Read DVD-R                 : Yes
Read DVD-RW                : Yes
Read DVD+R                 : No
Read DVD+RW                : No
Read DVD+R DL              : No
Read BD-ROM                : No
Read BD-R                  : No
Read BD-RE                 : No
Read Digital Audio         : Yes
Read CD+G                  : No
Read VideoCD               : Yes

Write CD-R                 : No
Write CD-RW                : No
Write DVD-R                : No
Write DVD-RW               : No
Write DVD-R DL             : No
Write DVD+R                : No
Write DVD+RW               : No
Write DVD+R DL             : No
Write DVD-RAM              : No
Write BD-R                 : No
Write BD-RE                : No
Buffer Underrun Protection : No
Mount Rainier              : No
Modes                      : n/a

Region Protection Control  : RPC I
Region                     : All
Changes User
Changes Vendor

Disc Information (D:\)
-------------------
Type                   : - no disc inserted -


Drive Information
------------------
Drive                      : SONY     CD-RW  CRX230E  
Type                       : CD-RW Recorder
Firmware Version           : QYS3
Buffer Size                : 2 MB
Date                       : ?
Serial Number
Vendor Specific            :   Mar23 ,2004
Drive Letter               : E:\
Location                   : 0:1
Mechanism                  : Tray
Read Speed                 : 40 , 32 , 24 , 16 , 12 , 8 , 4  X
Write Speed                : 52 , 40 , 32 , 24 , 16 , 12 , 8 , 4  X

Read CD Text               : Yes
Return C2 Pointers         : Yes
Read CD-R                  : Yes
Read CD-RW                 : Yes
Read DVD-ROM               : No
Read DVD-RAM               : No
Read DVD-R                 : No
Read DVD-RW                : No
Read DVD+R                 : No
Read DVD+RW                : No
Read DVD+R DL              : No
Read BD-ROM                : No
Read BD-R                  : No
Read BD-RE                 : No
Read Digital Audio         : Yes
Read CD+G                  : Yes
Read VideoCD               : Yes

Write CD-R                 : Yes
Write CD-RW                : Yes
Write DVD-R                : No
Write DVD-RW               : No
Write DVD-R DL             : No
Write DVD+R                : No
Write DVD+RW               : No
Write DVD+R DL             : No
Write DVD-RAM              : No
Write BD-R                 : No
Write BD-RE                : No
Buffer Underrun Protection : Yes
Mount Rainier              : Yes
Modes                      : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96


Disc Information (E:\)
-------------------
Type                   : - no disc inserted -


Interface Information
---------------------
Adapter 1
---------
Description           : Primary IDE Channel

Driver
Description           : ESDI_506.pdr
Company               : Microsoft Corporation
Version               : 4.10.2222
Description           : ESDI_506 Virtual Device  (Version 4.0)

Attached Devices
Description           : GENERIC IDE  DISK TYPE47
Type                  : Disk Drive
DMA                   : On

Adapter 2
---------
Description           : Secondary IDE Channel

Driver
Description           : ESDI_506.pdr
Company               : Microsoft Corporation
Version               : 4.10.2222
Description           : ESDI_506 Virtual Device  (Version 4.0)

Attached Devices
Description           : SAMSUNG DVD-ROM SD-608  
Type                  : CD-Rom Drive
DMA                   : On
Autorun               : On
Description           : SONY CD-RW  CRX230E  
Type                  : CD-Rom Drive
DMA                   : On
Autorun               : On


Software Information
--------------------
Operating System     : Windows 98 SE 
DirectX              : DirectX 9.0c

Description          : Nero Burning ROM
Version              : 6, 6, 0, 8
Company              : Ahead Software AG
Version Check        : Ok

Description          : Nero StartSmart
Version              : 2, 0, 0, 11
Company              : Ahead Software AG

Description          : Cover Designer
Version              : 2, 3, 0, 34
Company              : Nero AG

Description          : Nero BackItUp Application
Version              : 1, 2, 0, 43
Company              : Ahead Software AG

Description          : PowerDVD
Version              : 2.50.1203
Company              : CyberLink Corp.


Hardware Information
--------------------
CPU                  :  Pentium-III 550 MHz
Bus Speed            :  66 MHz
Motherboard          :  TriGem NAPOLI
System               :  TriGem NAPOLI
BIOS                 :  AMI 063100
Memory               :  192 MB
Sound                : Crystal SoundFusion(tm)
Video                : NVIDIA Vanta

Driver Information
------------------
Driver             : ESDI_506
Description        : ESDI_506 Virtual Device  (Version 4.0)
Version            : 4.10.2222
Company            : Microsoft Corporation

Driver             : HSFLOP
Description        : HSFLOP Virtual Device  (Version 4.0)
Version            : 4.10.2222
Company            : Microsoft Corporation

Driver             : RMM
Description        : RMM Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : SCSIPORT
Description        : SCSIPORT Virtual Device  (Version 4.0)
Version            : 4.10.2222
Company            : Microsoft Corporation

Driver             : APIX
Description        : Adaptec APIX Virtual Device
Version            : 4.60 (1021)
Company            : Adaptec

Driver             : ATAPCHNG
Description        : ATAPCHNG Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : CDFS
Description        : CDFS Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : CDTSD
Description        : CDTSD Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : CDVSD
Description        : CDVSD Virtual Device  (Version 4.0)
Version            : 4.10.2222
Company            : Microsoft Corporation

Driver             : DISKTSD
Description        : DiskTSD Virtual Device  (Version 4.0)
Version            : 4.10.2222
Company            : Microsoft Corporation

Driver             : DISKVSD
Description        : DiskVSD Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : DRVSPACX
Description        : DRVSPACX Virtual Device  (Version 4.0)
Version            : 4.70.1998
Company            : Microsoft Corporation

Driver             : DRVWCDB
Description        : Device Driver
Version            : 3.10.36a
Company            : Seagate Software, Inc.

Driver             : DRVWPPQT
Description        : Device Driver
Version            : 3.10.36a
Company            : Seagate Software, Inc.

Driver             : DRVWQ117
Description        : Device Driver
Version            : 3.10.36a
Company            : Seagate Software, Inc.

Driver             : NECATAPI
Description        : NECATAPI Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : SCSI1HLP
Description        : scsi1hlp Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : TORISAN3
Description        : TORISAN3 Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : VOLTRACK
Description        : voltrack Virtual Device  (Version 4.0)
Version            : 4.10.1998
Company            : Microsoft Corporation

Driver             : Aic78xx
Description        : Adaptec 7800 Family SCSI miniport
Version            : v1.30
Company            : Adaptec, Inc.

Driver             : PPA3
Description        : N/A
Version            : N/A
Company            : N/A

Driver             : SPARROW
Description        : Adaptec AIC-6x60 series SCSI miniport
Version            : v1.0 SCAM
Company            : Adaptec, Inc.

Driver             : PC800
Description        : N/A
Version            : N/A
Company            : N/A

Driver             : IOMEGA
Description        : IOMEGA Universal DASD VSD
Version            : 6.4.0.0
Company            : Iomega Corporation

Driver             : PxHelper
Description        : Px Helper for Windows 95
Version            : 1.0.6
Company            : Prassi Europe SARL

Driver             : asapi
Description        : ASAPI
Version            : 5, 1, 0, 2
Company            : VOB Computersysteme GmbH

Driver             : nerocd95
Description        : Nero CD driver for Windows 95/98/ME
Version            : 4.5.0.14
Company            : ahead software gmbh

im stoeckmaedle 18

76307 karlsbad, germany

Fax: ++49-7248-911-888

e-mail: [email]info@nero.com[/email]

Driver             : vobxtent
Description        : VOB Callback Helper
Version            : 1, 0, 0, 0
Company            : VOB Computersysteme GmbH

Driver             : imagedrv
Description        : NERO IMAGEDRIVE SCSI miniport
Version            : 2.27.0.0 built by: WinDDK
Company            : Ahead Software AG

Driver             : cdrdrv
Description        : vobIW Driver
Version            : 4, 0, 5, 270^
Company            : VOB Computersysteme GmbH 

Driver             : SMARTVSD
Description        : SMARTVSD Virtual Device  (Version 4.0)
Version            : 4.10.2222
Company            : Microsoft Corporation

Driver             : MSVCRT.DLL
Version            : 6.10.8924.0

Driver             : msvcirt.dll
Version            : 6.00.8168.0

Driver             : mfc42.dll
Version            : 6.00.8665.0

Driver             : msvcp60.dll
Version            : 6.00.8972.0

Driver             : msvcr70.dll
Version            : 7.00.9466.0

Driver             : OLE32.DLL
Version            : 4.71.2900

Driver             : OLEPRO32.DLL
Version            : 5.0.4518

Driver             : OLEDLG.DLL
Version            : 1.0

Driver             : ADVAPI32.DLL
Version            : 4.80.1675

Driver             : COMCTL32.DLL
Version            : 5.81

Driver             : SETUPAPI.DLL
Version            : 5.00.1671.1

Driver             : Aiff.dll
Version            : 2, 0, 1, 0

Driver             : DefConvertor.dll
Version            : 2, 0, 2, 0

Driver             : msa.dll
Version            : 2, 0, 9, 34

Driver             : Vqf.dll
Version            : 2, 0, 1, 0

Driver             : VqfDecLib.dll
Version            : 2, 0, 0, 6

Driver             : VqfEncLib.dll
Version            : 2, 0, 0, 6

Driver             : VqfEncLib1.dll
Version            : 2, 0, 0, 6

Driver             : TWINVQ2.CDB
Version            : n/a

Driver             : wav.dll
Version            : 2, 0, 2, 0

Driver             : Aac.dll
Version            : 2, 5, 9, 99

Driver             : aacenc32.dll
Version            : 3, 0, 0, 4

Driver             : ogg.dll
Version            : 1, 0, 0, 6

Driver             : mp3PP.dll
Version            : 1, 0, 0, 8

Driver             : mp3PRO.dll
Version            : 2, 0, 3, 0

Driver             : mp3PRO_dmo.dll
Version            : 2, 0, 0, 16

Driver             : mp3PRO_hlp.dll
Version            : 2, 0, 0, 16

Driver             : lame_enc.dll
Version            : 3, 93, 1, 0

Driver             : DriveLocker.dll
Version            : 1, 0, 0, 17

Driver             : NeroCBUI.dll
Version            : 1, 2, 1, 16

Driver             : apreg.dll
Version            : 2, 0, 0, 7

Driver             : AdvrCntr.dll
Version            : 1,2,1, 2278

Driver             : NeroIPP.dll
Version            : 3, 0, 0, 4

Driver             : NeFileSrc.ax
Version            : 3, 0, 0, 4

Driver             : NeRender.ax
Version            : 3, 0, 0, 4

Driver             : NeAudio.ax
Version            : 3, 0, 0, 4

Driver             : NeAMR.dll
Version            : 3, 0, 0, 4

Driver             : NeVideo.ax
Version            : 3, 0, 0, 4

Driver             : NDParser.ax
Version            : 3, 0, 0, 4

Driver             : NeQTDec.ax
Version            : 3, 0, 0, 4

Driver             : aacplus.dll
Version            : 3, 0, 0, 4

Lower Filters
-------------
Upper Filters
-------------
Video Codecs
------------
VDOnet VDOWave                               : 2, 1, 1, 2
Cinepak Codec by Radius                      : 1.10.0.6
Intel Indeo(R) Video R3.2
Intel Indeo(R) Video R3.2
Microsoft Video 1                            : 4.10.1998
Microsoft RLE                                : 4.10.1998
Microsoft H.263 Video Codec                  : 4.4.3345
Microsoft H.261 Video Codec                  : 4.4.3345
Indeo® video 5.04                            : R.5.04.15.2.41
DivX 5.0.2 Codec                             : 4, 0
XviD MPEG-4 Codec                            : n/a
Microsoft YUV                                : 5.3.0000000.900 built by: DIRECTX
Microsoft YUV                                : 5.3.0000000.900 built by: DIRECTX
Microsoft YUV                                : 5.3.0000000.900 built by: DIRECTX
ffdshow Video Codec                          : n/a

Audio Codecs
------------
Lernout & Hauspie CODECs                     : 1.00.0.1
Microsoft IMA ADPCM CODEC                    : 4.00.0.0
Microsoft ADPCM CODEC                        : 4.00.0.0
Microsoft GSM 6.10 Audio CODEC               : 4.00.0.0
Microsoft CCITT G.711 A-Law and u-Law CODEC  : 4.00.0.0
DSP Group TrueSpeech(TM) Software CODEC      : 1.00.0.0
Microsoft G.723.1 CODEC                      : 1.02.0.1
Indeo® audio software                        : 2.05.0.50
Windows Media Audio                          : 4.02.0.0
Sipro Lab Telecom ACELP.net audio codec      : 3.02.0.0
Fraunhofer IIS MPEG Layer-3 Codec (advanced)  : 1.09.1.49
ffdshow Avisynth AVI sound                   : 4.00.0.0
Microsoft PCM Converter                      : 4.03.0.0


ASPI Information
----------------
System ASPI      :  ASPI is installed and working properly

WNASPI32.DLL     :  4.60 (1021) 45056 bytes September 10, 1999
APIX.VXD         :  4.60 (1021) 22603 bytes September 10, 1999
WINASPI.DLL      :  4.60 (1021) 5600 bytes September 10, 1999
ASPIENUM.VXD     :  4.60 (1021) 7743 bytes September 10, 1999

Nero ASPI        :  ASPI is installed and working properly

WNASPI32.DLL     :  2.0.1.74 164112 bytes October 26, 2004

Installed OS Patches
--------------------
(Q241134) USB driver update                                                                  :  No
(Q265314) Error Message 'No Valid Drive/Disc Found' Playing Audio CD After Using Data CD-ROM :  No
(Q274370) Error Message on a Blue Screen When You Try to Play Digital CD Audio               :  No
(Q240075) USB Devices may not work                                                           :  No
(Q241134) USB Enumeration Problems                                                           :  No
(Q253697) USB Enumeration Problems with OpenHCI Controller on Fast Computers                 :  No
(Q243174) MS Digital Video May Lose IEEE 1394 Device Audio                                   :  No
(Q252958) High Bandwith patch installed                                                      :  No
(Q239694) Large Writes to Removable Media May Result in Data Loss                            :  No
(Q242937) Windows Driver Model Audio Update                                                  :  No
(Q242975) FireWire Support patch installed                                                   :  No
(Q252183) 1394 Host Controller Driver Does Not Retry Busy Devices Properly                   :  No
(Q284837) 1394 Audio/Video Control Device Stops Working Unexpectedly                         :  No
(Q290831) SRB_FUNCTION_SHUTDOWN Requests Not Sent to SCSI Miniports During Shutdown          :  No
(Q284837) 1394 Audio/Video Control Device Stops Working Unexpectedly                         :  No

40x with simulation:

Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/99 12:06:00 PM 
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 5:35:34 PM 
Nero Version: 6.6.0.8
Recorder:             <SONY CD-RW  CRX230E>     Version: QYS3 - HA 0 TA 1 - 6.6.0.8
 Adapter driver:      <ESDI_506>                HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <SAMSUNG  DVD-ROM SD-608  >Version: 1.1  - HA 0 TA 0 - 6.6.0.8
 Adapter driver:      <ESDI_506>                HA 0
SAMSUNG DVD-ROM SD-608 (Target 0, D:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
SONY CD-RW  CRX230E (Target 1, E:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs: 
WriteBufferSize: 32505856 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 191MB (196084kB)
Free physical memory: 0MB (44kB)
Memory in use       : 70 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

17.3.2005
CD-ROM (ISO)
6:40:41 PM	#1 Text 0 File Isodoc.cpp, Line 6172
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : TRUE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
6:40:41 PM	#2 Text 0 File Burncd.cpp, Line 2868
	SONY CD-RW  CRX230E
	Buffer under-run error protection activated
	
6:40:42 PM	#3 Text 0 File Reader.cpp, Line 127
	Reader running
	
6:40:42 PM	#4 Text 0 File Writer.cpp, Line 122
	Writer SONY     CD-RW  CRX230E   running
	
6:40:42 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
6:40:42 PM	#6 Text 0 File Burncd.cpp, Line 3153
	Turn on Track-At-Once, using CD-R/RW media
	
6:40:43 PM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Last possible write address on media:   359845 ( 79:59.70)
	Last address to be written:             299259 ( 66:32.09)
	
6:40:43 PM	#8 Text 0 File DlgWaitCD.cpp, Line 271
	Write in overburning mode: NO (enabled: CD)
	
6:40:43 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2316
	Recorder: SONY CD-RW  CRX230E;
	   CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
	     Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
	
6:40:43 PM	#10 Text 0 File DlgWaitCD.cpp, Line 433
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
6:40:43 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 299260 (299260) = #299260/66:30.10
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299258 blocks [SONY     CD-RW  CRX230E]
	--------------------------------------------------------------
	
6:40:43 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [SONY     CD-RW  CRX230E] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     613191680, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    -150 |  lead-in |   0 |    0x41 | 0x00
	    -150 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	  299260 | lead-out |   1 |    0x41 | 0x00
	
6:40:43 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
	Removed 2 run-out blocks from end of track 1. Length: 299260 -> 299258.
	
6:40:43 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
6:40:43 PM	#15 Text 0 File Burncd.cpp, Line 4040
	Cache writing successful.
	
6:40:43 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
6:40:43 PM	#17 Phase 32 File dlgbrnst.cpp, Line 1832
	Simulation started at 40x (6,000 KB/s)
	
6:40:43 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
6:40:43 PM	#19 Text 0 File Mmc.cpp, Line 21235
	Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
	
6:43:10 PM	#20 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
6:43:16 PM	#21 Phase 33 File dlgbrnst.cpp, Line 1832
	Simulation completed successfully at 40x (6,000 KB/s)
	
6:43:17 PM	#22 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 40x (6,000 KB/s)
	
6:43:17 PM	#23 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
6:43:17 PM	#24 Text 0 File Mmc.cpp, Line 21235
	Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
	
6:43:37 PM	#25 SCSI -1135 File Cdrdrv.cpp, Line 1435
	SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02CA0000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 0x00 0x00 0x00 0x08 0x40 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
6:43:37 PM	#26 CDR -1135 File Writer.cpp, Line 311
	Write error
	
6:43:37 PM	#27 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
6:43:37 PM	#28 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
6:43:37 PM	#29 CDR -201 File WriterStatus.cpp, Line 200
	Invalid write state
	SONY CD-RW  CRX230E\H0 T1
	
6:43:37 PM	#30 TRANSFER -18 File WriterStatus.cpp, Line 200
	Could not perform EndTrack
	
6:43:37 PM	#31 Text 0 File Mmc.cpp, Line 15908
	<SONY    CD-RW  CRX230E  > start Close Session
	
6:43:40 PM	#32 SCSI -1176 File Cdrdrv.cpp, Line 1181
	SCSI Exec, HA 0, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x72
	Sense Qual: 0x00
	CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x72 0x00 
	
6:43:40 PM	#33 CDR -1176 File WriterStatus.cpp, Line 249
	Session fixation error
	
6:43:40 PM	#34 TRANSFER -19 File WriterStatus.cpp, Line 249
	Could not perform Fixation
	
6:43:40 PM	#35 Text 0 File WriterStatus.cpp, Line 258
	falling back to disc fixation
	
6:43:40 PM	#36 Text 0 File Mmc.cpp, Line 15908
	<SONY    CD-RW  CRX230E  > start Close Session
	
6:43:41 PM	#37 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 40x (6,000 KB/s)
	

Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 10:55:38 AM 
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 1/31/03 6:13:50 PM 
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 1/31/03 6:13:48 PM 
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 3/2/01 8:55:54 PM 
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\cdrdrv.vxd': Ver=4, 0, 5, 270^, size=32860 bytes, created 1/28/03 6:24:20 PM 
File 'IoSubsys\asapi.vxd': Ver=5, 1, 0, 2, size=14581 bytes, created 9/1/98 12:33:10 PM 
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM 
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:

4x, no simulation:

17.3.2005
CD-ROM (ISO)
1:50:40 PM	#1 Text 0 File Isodoc.cpp, Line 6172
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
1:50:40 PM	#2 Text 0 File Burncd.cpp, Line 2868
	SONY CD-RW  CRX230E
	Buffer under-run error protection activated
	
1:50:41 PM	#3 Text 0 File Reader.cpp, Line 127
	Reader running
	
1:50:41 PM	#4 Text 0 File Writer.cpp, Line 122
	Writer SONY     CD-RW  CRX230E   running
	
1:50:41 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
1:50:41 PM	#6 Text 0 File Burncd.cpp, Line 3153
	Turn on Track-At-Once, using CD-R/RW media
	
1:50:41 PM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Last possible write address on media:   359845 ( 79:59.70)
	Last address to be written:             286211 ( 63:38.11)
	
1:50:41 PM	#8 Text 0 File DlgWaitCD.cpp, Line 271
	Write in overburning mode: NO (enabled: CD)
	
1:50:41 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2316
	Recorder: SONY CD-RW  CRX230E;
	   CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
	     Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
	
1:50:41 PM	#10 Text 0 File DlgWaitCD.cpp, Line 433
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
1:50:41 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 286212 (286212) = #286212/63:36.12
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 286210 blocks [SONY     CD-RW  CRX230E]
	--------------------------------------------------------------
	
1:50:41 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [SONY     CD-RW  CRX230E] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     586469376, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    -150 |  lead-in |   0 |    0x41 | 0x00
	    -150 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	  286212 | lead-out |   1 |    0x41 | 0x00
	
1:50:41 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
	Removed 2 run-out blocks from end of track 1. Length: 286212 -> 286210.
	
1:50:41 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
1:50:41 PM	#15 Text 0 File Burncd.cpp, Line 4040
	Cache writing successful.
	
1:50:41 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
1:50:41 PM	#17 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 4x (600 KB/s)
	
1:50:41 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
1:50:41 PM	#19 Text 0 File Mmc.cpp, Line 21235
	Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
	
1:50:53 PM	#20 SCSI -1135 File Cdrdrv.cpp, Line 1435
	SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02C80000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
1:50:53 PM	#21 CDR -1135 File Writer.cpp, Line 311
	Write error
	
1:50:53 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
1:50:54 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
1:50:54 PM	#24 CDR -201 File WriterStatus.cpp, Line 200
	Invalid write state
	SONY CD-RW  CRX230E\H0 T1
	
1:50:54 PM	#25 TRANSFER -18 File WriterStatus.cpp, Line 200
	Could not perform EndTrack
	
1:50:54 PM	#26 Text 0 File Mmc.cpp, Line 15908
	<SONY    CD-RW  CRX230E  > start Close Session
	
1:50:58 PM	#27 SCSI -1176 File Cdrdrv.cpp, Line 1181
	SCSI Exec, HA 0, TA 1, LUN 0
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x72
	Sense Qual: 0x00
	CDB Data:   0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
	Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x72 0x00 
	
1:50:58 PM	#28 CDR -1176 File WriterStatus.cpp, Line 249
	Session fixation error
	
1:50:58 PM	#29 TRANSFER -19 File WriterStatus.cpp, Line 249
	Could not perform Fixation
	
1:50:58 PM	#30 Text 0 File WriterStatus.cpp, Line 258
	falling back to disc fixation
	
1:50:58 PM	#31 Text 0 File Mmc.cpp, Line 15908
	<SONY    CD-RW  CRX230E  > start Close Session
	
1:50:58 PM	#32 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 4x (600 KB/s)
	

Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 10:55:38 AM 
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 1/31/03 6:13:50 PM 
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 1/31/03 6:13:48 PM 
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 3/2/01 8:55:54 PM 
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\cdrdrv.vxd': Ver=4, 0, 5, 270^, size=32860 bytes, created 1/28/03 6:24:20 PM 
File 'IoSubsys\asapi.vxd': Ver=5, 1, 0, 2, size=14581 bytes, created 9/1/98 12:33:10 PM 
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM 
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM 

Registry Keys:

#2

@ KRFusion
Welcome:). Nice first post, very informative…good job :iagree: . Your problem could be one of many things. I would recommend using the Clean pack (registry checker and driver clean tool) first and see if that makes a difference.

Your system memory is very low, but I don’t think that is a cause of this problem. I would certainly not multi-task during a burn, though. You may also benefit from defragging your HDD often.


#3

Still no luck. :sad: I’ve run Cleanpack and it removed a VOB driver, then I defragged afterwards as well. I also ran scandisk to make sure my C drive didn’t have any errors on it.

I’m no closer to pin-pointing what’s causing the problem, but would it be safe to rule out the cd-burning software (Nero/Pinnacle 7) and the ASPI drivers? (Currently the Force ASPI version)


#4

@ KRFusion
Can you try moving your burner to secondary-MASTER and move your dvd-rom to secondary-SLAVE to see if this has any effect? Don’t forget to redo your jumpers.


#5

An error still seems to occur at the very start of the writing stage, the CD’s still blank; I also tried having just the writer attached. On my second try, the simulation also failed as well:

Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/99 12:06:00 PM 
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/04 5:35:34 PM 
Nero Version: 6.6.0.8
Recorder:             <SONY CD-RW  CRX230E>     Version: QYS3 - HA 0 TA 0 - 6.6.0.8
 Adapter driver:      <ESDI_506>                HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <SONY     CD-RW  CRX230E  >Version: QYS3 - HA 0 TA 0 - 6.6.0.8
 Adapter driver:      <ESDI_506>                HA 0
SONY CD-RW  CRX230E (Target 0, D:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs: 
WriteBufferSize: 32505856 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 191MB (196088kB)
Free physical memory: 7MB (8156kB)
Memory in use       : 71 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

26.3.2005
CD-ROM (ISO)
5:32:23 PM	#1 Text 0 File Isodoc.cpp, Line 6172
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : TRUE
	Write                   : TRUE
	Finalize CD             : FALSE
	Multisession            : TRUE
	Multisession type:      : Start multisession
	Burning mode            : TAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : FALSE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
5:32:23 PM	#2 Text 0 File Burncd.cpp, Line 2868
	SONY CD-RW  CRX230E
	Buffer under-run error protection activated
	
5:32:24 PM	#3 Text 0 File Reader.cpp, Line 127
	Reader running
	
5:32:24 PM	#4 Text 0 File Writer.cpp, Line 122
	Writer SONY     CD-RW  CRX230E   running
	
5:32:24 PM	#5 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
5:32:24 PM	#6 Text 0 File Burncd.cpp, Line 3153
	Turn on Track-At-Once, using CD-R/RW media
	
5:32:25 PM	#7 Text 0 File DlgWaitCD.cpp, Line 259
	Last possible write address on media:   359845 ( 79:59.70)
	Last address to be written:             346428 ( 77:01.03)
	
5:32:25 PM	#8 Text 0 File DlgWaitCD.cpp, Line 271
	Write in overburning mode: NO (enabled: CD)
	
5:32:26 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2316
	Recorder: SONY CD-RW  CRX230E;
	   CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
	     Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
	
5:32:26 PM	#10 Text 0 File DlgWaitCD.cpp, Line 433
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
5:32:26 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 346429 (346429) = #346429/76:59.4
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 346427 blocks [SONY     CD-RW  CRX230E]
	--------------------------------------------------------------
	
5:32:26 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [SONY     CD-RW  CRX230E] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc not fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200     709793792, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	    -150 |  lead-in |   0 |    0x41 | 0x00
	    -150 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	  346429 | lead-out |   1 |    0x41 | 0x00
	
5:32:26 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
	Removed 2 run-out blocks from end of track 1. Length: 346429 -> 346427.
	
5:32:26 PM	#14 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
5:32:27 PM	#15 Text 0 File Burncd.cpp, Line 4040
	Cache writing successful.
	
5:32:27 PM	#16 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
5:32:27 PM	#17 Phase 32 File dlgbrnst.cpp, Line 1832
	Simulation started at 12x (1,800 KB/s)
	
5:32:27 PM	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
5:32:27 PM	#19 Text 0 File Mmc.cpp, Line 21235
	Set BUFE: Buffer under-run error protection -> ON , SMART-BURN : ON
	
5:32:35 PM	#20 SCSI -1135 File Cdrdrv.cpp, Line 1435
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02C40000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
5:32:35 PM	#21 CDR -1135 File Writer.cpp, Line 311
	Write error
	
5:32:35 PM	#22 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
5:32:35 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
5:32:35 PM	#24 CDR -201 File WriterStatus.cpp, Line 157
	Invalid write state
	SONY CD-RW  CRX230E\H0 T0
	
5:32:35 PM	#25 TRANSFER -18 File WriterStatus.cpp, Line 157
	Could not perform EndTrack
	
5:32:40 PM	#26 Phase 34 File dlgbrnst.cpp, Line 1832
	Simulation failed at 12x (1,800 KB/s)
	

Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 10:55:38 AM 
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\cdrdrv.vxd': Ver=4, 0, 5, 270^, size=32860 bytes, created 1/28/03 6:24:20 PM 
File 'IoSubsys\asapi.vxd': Ver=5, 1, 0, 2, size=14581 bytes, created 9/1/98 12:33:10 PM 
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM 
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM 
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:


#6

@ KRFusion
At this point, I would try removing ALL burning programs and running ALL the nero clean tools and then reinstall JUST Nero Burning Rom and see if that makes a difference. Could be a pinnacle conflict.


#7

Ok, I’ve tried that out.

I noticed during the simulation that the buffer drops all the way from 100% after about 30 secs. In the past, it usually stayed in the 90-100 range. Could there be a problem with my writer?


#8

@ KRFusion
Have you tried a burn using DiscAtOnce(DAO) option instead of TrackAtOnce(TAO), and also try to finalize(close) the disc instead of ‘multi-session’?

Can you try the drive in another system…it may be the drive that is bad. If you can also try a different burner in your system, that might help.


#9

I just tested my writer in another computer recently. It seems that’s where the problem came from.


#10

@ KRFusion
I am not sure I know what you mean? Did you find a solution to your problem? If you did, could you share with us as it may help others in the future.


#11

I have the exact same symptoms that you do.Sony crx-230e with recently
applied QSOE FW.It was burning audio cd’s only untill recently and now it wont do that even.Sounds exactly like the problems your having,ever find out what it is?
best regards,
Scott


#12

i think you need to go back to qys1 using mtkflash bcoz i too got a prob i got back to qys1 then reflashed to qys3