SMART-BURN utility for 48x drive

vbimport

#1

Download now from there web page :slight_smile:

My results:-

This Disc is designed for CD-RW/COMBO Drive Only.
Disc Type, Material = CD-R, Phthalocyanine
ATIP Lead-in = 97m 26s 66f
Norminal Capacity = 702.83MB (79m 59s 74f)
Disc Manufacturer maybe =
CMC(99min)
SMART-BURN Speed Limit = 48X

This Disc is designed for CD-RW/COMBO Drive Only.
Disc Type, Material = CD-R, Phthalocyanine
ATIP Lead-in = 97m 15s 17f
Norminal Capacity = 702.83MB (79m 59s 73f)
Disc Manufacturer maybe =
RiTEK,JS
SMART-BURN Speed Limit = 48X

This Disc is designed for CD-RW/COMBO Drive Only.
Disc Type, Material = CD-R, Phthalocyanine
ATIP Lead-in = 97m 15s 17f
Norminal Capacity = 702.83MB (79m 59s 73f)
Disc Manufacturer maybe =
RiTEK,JS
SMART-BURN Speed Limit = 48X

This Disc is designed for CD-RW/COMBO Drive Only.
Disc Type, Material = CD-R, Phthalocyanine
ATIP Lead-in = 97m 27s 28f
Norminal Capacity = 702.83MB (79m 59s 74f)
Disc Manufacturer maybe =
Princo
SMART-BURN Speed Limit = 40X

This Disc is designed for CD-RW/COMBO Drive Only.
Disc Type, Material = CD-R, Phthalocyanine
ATIP Lead-in = 97m 15s 17f
Norminal Capacity = 702.83MB (79m 59s 73f)
Disc Manufacturer maybe =
RiTEK,JS
SMART-BURN Speed Limit = 48


#2

Already posted on frontpage as news :wink:


#3

Hi i wasted no time downloading the new smart burn tool i have clocked my 32125w to the 48 speed with vs02 however when i ran the smart burn utility i got unknown for all fields with the liteon disk and any others i tried,i tried upping to vs04 then got the same results have gone back to vs02 now,any one have the same problem cdridentifier recognises the discs and one other thing after flashing back to vs02 infotool now states 48 write and 48 read whereas before it showed 48 write and 12 speed write can anyone shed any light please

Embazzy


#4

I had the same problem until I unchecked the ‘hide cdr media’ option in the CloneCd icon in the system tray.


#5

Thanks for your reply i thought about that but it was late and i couldnt be bothered as i had switched pc off will try tonight when i can worry less about getting out of bed in the morning

Embazzy


#6

Every time I run this utlity I get a smart burn box that comes up and says “mode sense error”.
Anyone got any ideas what is causing this???
Thanks,
Roger


#7

Probably no CD or damaged CD in the drive. Could also be ASPI problem.


#8

anyone know what this is all about? (press the smart-burn logo and this message comes up)

Released Date : 2002/6/12
Revision : V1.0
Drive Models : for 48X CD-RW
LTR-48125W : for firmwares after VS04
LTR-40126S : all firmwares

note the VS04 firmware


#9

the more intersting note is the 40126S …there maybe even better o/c in the future…40126S…6 series is supposed to support 24x rewrite…so we may have the 40126S…o/c in the future to 48/24/48