Session Fixation Error In Nero

vbimport

#1

Hye,

   I am using A sony CRX230E cd writer.Ive just updated its firmware.for the past couple of weeks i have been having problem in burning multi session disks.

whenever i burn on a disk in multisession mode for the first time there are no errors but when i burn on it again i.e. in the second session i always get a seesion fixation error.i am attaching my nero log file.Please help.


#2

@ behezu
Welcome:). Does this discs still read OK, as in all the files are accessible and not corrupted?


#3

Hye,

    Sometimes it happens that no new files are burnt on the cd  but the cd does not get spoilt  or corrupted as in the previous session files work.But sometimes it shows Session fixation error and burn process failed but the files are burnt on to the cd in the second session and i can access them .So though it shows failed burning actually all files have been burnt in the sessions after the first.I mailed nero regarding this and they told me it is bad media but i have changed my media (from moserbaer to sony) and moserbaer used to work fine initially.

Thanks.


#4

SAME problem here (Win98SE) writing to CD-R media but NO problem burning to CD-RWs… :confused:

Nero log file:

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/02 16.03.58
ahead WinASPI: File ‘C:\PROGRAMMI\AHEAD\NERO\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/04 17.35.34
Nero Version: 6.6.0.8
Recorder: <WAITEC STORM 52/3> Version: 1.25 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <ESDI_506> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < 54X CD-ROM >Version: 4.16 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <ESDI_506> HA 0
54X CD-ROM (Target 1, E: ): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
WAITEC STORM 52/3 (Target 0, F: ): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
WAITEC STORM40 (Target 1, G: ): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 127MB (130568kB)
Free physical memory: 0MB (44kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.3.2005
CD-ROM (ISO)
15.06.21 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15.06.21 #2 Text 0 File Burncd.cpp, Line 2868
WAITEC STORM 52/3
SafeLink activated

15.06.21 #3 Text 0 File Reader.cpp, Line 127
Reader running

15.06.21 #4 Text 0 File Writer.cpp, Line 122
Writer WAITEC STORM 52/3 running

15.06.21 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

15.06.21 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media

15.06.22 #7 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 323104 ( 71:50.04)

15.06.22 #8 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

15.06.22 #9 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: WAITEC STORM 52/3;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

15.06.22 #10 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<

15.06.22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 38640 (38640) = #38640/8:35.15
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 38638 blocks [WAITEC STORM 52/3]

15.06.22 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [WAITEC STORM 52/3] for write in TAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 6 to 6:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 79441920, ISRC “”
DAO layout:

Start|Track|Idx|CtrlAdr|RecDep_____
284315 | lead-in | 0 | 0x41 | 0x00
284315 | 6 | 0 | 0x41 | 0x00
284465 | 6 | 1 | 0x41 | 0x00
323105 | lead-out | 1 | 0x41 | 0x00

15.06.22 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 6. Length: 38640 -> 38638.

15.06.22 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

15.06.22 #15 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

15.06.22 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

15.06.22 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (2.400 KB/s)

15.06.23 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #284465

15.06.23 #19 Text 0 File Mmc.cpp, Line 21235
Set BUFE: SafeLink -> ON , Adapt writespeed to disc : ON

15.06.59 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15.07.03 #21 Text 0 File Mmc.cpp, Line 15908
<WAITEC STORM 52/3 > start Close Session

15.07.14 #22 SCSI -1176 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x00

15.07.14 #23 CDR -1176 File ThreadedTransferInterface.cpp, Line 1288
Session fixation error

15.07.14 #24 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1288
Could not perform Fixation

15.07.14 #25 Text 0 File Mmc.cpp, Line 15908
<WAITEC STORM 52/3 > start Close Session

15.07.39 #26 SCSI -1176 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x00

15.07.39 #27 CDR -1176 File ThreadedTransferInterface.cpp, Line 1288
Session fixation error

15.07.39 #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1288
Could not perform Fixation

15.07.39 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (2.400 KB/s)

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 05/05/99 22.22.00
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 11/03/02 10.55.38
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 05/05/99 22.22.00
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 05/05/99 22.22.00
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69574 bytes, created 05/05/99 22.22.00
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 05/05/99 22.22.00
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 05/05/99 22.22.00 (Adapter driver for rec)

Registry Keys: