Session fixation error :a

vbimport

#1

Out of the blue my 1620 oem started to get this error :a
Session fixation error Could not perform end of Disc-at-once.
i tryed diffrent media with the same result.
defraged the hd ,ran virus scan and still no luck.

it can burn cdr’s fine thou :confused:
here is the log from nero.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 3:51:12 PM
Nero version: 6.6.0.1
Recorder: <ATAPI DVD DD 2X16X4X16> Version: G7P9 - HA 3 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4521B>Version: 1.03 - HA 3 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DD 2X16X4X16 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 5 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD DD 2X16X4X16 D: CDRom0
HL-DT-ST RW/DVD GCC-4521 E: CDRom1
Generic DVD-ROM H: CDRom2
AXV CD/DVD-ROM G: CDRom3

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 540MB (553624kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.12.2004
UDF/ISO compilation
11:39:04 AM #1 Phase 112 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation started

11:39:04 AM #2 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.IFO has been modified

11:39:04 AM #3 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.BUP has been modified

11:39:04 AM #4 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_01_0.IFO has been modified

11:39:04 AM #5 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_01_0.BUP has been modified

11:39:04 AM #6 Phase 113 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation completed

11:39:04 AM #7 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:39:04 AM #8 Phase 111 File dlgbrnst.cpp, Line 1853
DVD-Video files sorted

11:39:04 AM #9 Text 0 File Reader.cpp, Line 127
Reader running

11:39:04 AM #10 Text 0 File Writer.cpp, Line 122
Writer ATAPI DVD DD 2X16X4X16 running

11:39:04 AM #11 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

11:39:05 AM #12 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

11:39:05 AM #13 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

11:39:05 AM #14 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1253583 (278:34.33, 2448MB)

11:39:05 AM #15 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD DVD)

11:39:05 AM #16 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: ATAPI DVD DD 2X16X4X16, Media type: DVD+R

11:39:05 AM #17 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:39:05 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1253584 (1253584) = #1253584/278:34.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1253584 blocks [ATAPI DVD DD 2X16X4X16]
--------------------------------------------------------------

11:39:05 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [ATAPI DVD DD 2X16X4X16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2567340032, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1253584 | lead-out | 1 | 0x00 | 0x41

11:39:05 AM #20 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

11:39:05 AM #21 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

11:39:05 AM #22 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

11:39:05 AM #23 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 4x (5,540 KB/s)

11:39:05 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:39:05 AM #25 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03E46000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

11:39:05 AM #26 Text 0 File DVDR.cpp, Line 5367
Drive: ATAPI DVD DD 2X16X4X16
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0

11:39:05 AM #27 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM

11:39:05 AM #28 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 8:04,913 (484913ms) -> OK

11:39:05 AM #29 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes

11:39:21 AM #30 SCSI -1176 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x04470000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01

11:39:21 AM #31 CDR -1176 File Writer.cpp, Line 311
Session fixation error

11:39:21 AM #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:39:22 AM #33 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

11:39:22 AM #34 SCSI -1176 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03

11:39:22 AM #35 Phase 127 File dlgbrnst.cpp, Line 1853
Generating DVD high compatibility borders

11:39:22 AM #36 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

11:39:22 AM #37 Text 0 File DVDR.cpp, Line 5367
Drive: ATAPI DVD DD 2X16X4X16
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0

11:39:22 AM #38 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

11:39:22 AM #39 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

11:39:22 AM #40 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

11:39:22 AM #41 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.01a, size=20368 bytes, created 11/12/2004 3:17:39 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Have you had any success in solving this error problem? I am having the same issue with my BenQ 1620 @ firmware B7T9.

Dennis


#3
  • please note the first error-message concerns the media - however, there seems to be a lot of faffing-around with the formal structure of this disk: is it a home-authored DVD?

#4

Try your luck with an update to nero 6.6.0.3.


#5

Hi There
I had the same problem using a Samsung TS-H552B DVD ± RW/R and Verbatim DVD-R media.
I upgraded the firmware on the Samsung from T04 to T06 and the problem went away


#6

mastiso,
Since you have RecordNow also installed, can you test to see if it experiences an error while burning the same job? This would help to determine if there is a hardware problem or maybe that the problem was really a software-inspired error.

Since the drive was originally a generic and the log indicates a possible connectivity error, I have a few questions.
Is it operated as Master of the secondary IDE channel alone on a high quality 80 wire ribbon cable?
Is the motherboard Bios set to auto detect with auto type the master of secondary ide so that it will load full support?
Is the secondary master running at UDMA 2 as seen in Windows Device Manager?
Is there any problem-causing 3rd party IDE drivers in use or are you using the standard Microsoft drivers that come with Windows?