SD 2.80.010----burnt w/ plex24-discdump-fireburner

made a successful copy of sims unleashed with my plex

here are the pics:

copy of original cd--------------works in 8x plex 24x plex and 56x cdrom
Thread1: Executing
Recording device: PLEXTOR CD-R PX-W2410A
Firmware version: 1.04
Recording method: Disc-at-once 16 (Dao16)
Recording Speed: Max
BURN Proof: Enabled

//----------------------------------------------------------------------
// Burning - data is being permanently written to CD
//----------------------------------------------------------------------

Thread1: Setting Write Parameters
Thread1: Reading Disc Info
Thread1: Start LBA is -11634
Thread1: Processing Lead-in
Thread2: Executing
Thread1: Processing Track 1 Pause [150 Sectors]
Thread1: Processing Track 1 [Mode1] [335411 Sectors]
Thread1: Converting from Mode1/2352 to Mode1/2368 on the fly
Thread1: Autocorrecting sub-channel
Thread1: Processing Lead-out
Thread2: Synchronizing Cache
Recording complete

copy of copy cd----------------works in 8x plex 24x plex and 56x cdrom

Thread1: Executing
Recording device: PLEXTOR CD-R PX-W2410A
Firmware version: 1.04
Recording method: Disc-at-once 16 (Dao16)
Recording Speed: Max
BURN Proof: Enabled

//----------------------------------------------------------------------
// Burning - data is being permanently written to CD
//----------------------------------------------------------------------

Thread1: Setting Write Parameters
Thread1: Reading Disc Info
Thread1: Start LBA is -11634
Thread1: Processing Lead-in
Thread2: Executing
Thread1: Processing Track 1 Pause [150 Sectors]
Thread1: Processing Track 1 [Mode1] [335411 Sectors]
Thread1: Converting from Mode1/2352 to Mode1/2368 on the fly
Thread1: Autocorrecting sub-channel
Thread1: Processing Lead-out
Thread2: Synchronizing Cache
Recording complete

my Fireburner burns always in testmode
I allready registered ( Status Window says registered )

>How can i change this

Originally posted by Allmighty
[B]my Fireburner burns always in testmode
I allready registered ( Status Window says registered )

>How can i change this [/B]

Config… - > Device options -> turn TEST BURN off… :wink:

but it schould work with burnatonce too… (this one includs DDump as reading engine…) <- but i havent tested yet… dont have a game with this protection

Originally posted by FiReKiLL
[B]

Config… - > Device options -> turn TEST BURN off… :wink:

but it schould work with burnatonce too… (this one includs DDump as reading engine…) <- but i havent tested yet… dont have a game with this protection [/B]

it didnt do it, fireburner will always ask for test

DID you manage a working UT2003 Copy with this???

Originally posted by FiReKiLL
[it schould work with burnatonce too… (this one includs DDump as reading engine…) <- but i havent tested yet… dont have a game with this protection [/B]

Yes with a Lite-on or Asus but probably/possibly not with a plex. Discdump/fireburner so far is the only copying solution found for plex writers. You’ll need some luck anyway with a plex.

@ Allmighty
Contact IgD, preferably by email, if you’ve registered but can’t burn even after unchecking “Test burn” on fireburner’s configuration options.

Also, UT2003 cannot be copied using this or any other currently available software.

Originally posted by philamber
[B]

@ Allmighty
Contact IgD, preferably by email, if you’ve registered but can’t burn even after unchecking “Test burn” on fireburner’s configuration options.

Also, UT2003 cannot be copied using this or any other currently available software. [/B]

Thx, The only thing i wants to know thast i can´t Copy UT2003 with this.

UT 2003 uses a new and improved version of SecuRom which unfortunately cannot be copied and only emulated for now :a

Originally posted by G@M3FR3@K
UT 2003 uses a new and improved version of SecuRom which unfortunately cannot be copied and only emulated for now :a

as i already know, but i just want to manage it by myself.