Schreibgeschwindigkeit durch Nero begrenzt?

Hey, sorry falls ein solcher Thread schon existiert, habe aber auf Anhieb nichts gefunden.

Mein Problem:

Ich habe folgenden CD-Brenner:
Gerätebeschreibung
LG CD-RW CED-8080B
Writing Speed (CD-R) 8-fach
Writing Speed (CD-RW) 4-fach

Wenn ich mit Nero “billige” CD-Rohlinge (Silver-C|rcle), Schreibgeschw. 1-fach bis 52-fach, brennt er mit maximaler 8-facher Geschwindigkeit. OK.

Jetzt habe ich mir aber CD-RW Rohlinge (Intens0), Schreibgeschw. 4-fach bis 12-fach, zugelegt und Nero will diese nur mit 2-facher Geschwindigkeit brennen. Was natürlich nicht hinhaut, wegen den Rohling Anforderungen.
Warum kann ich sie nicht 4-fach brennen? :confused:

Kann ich die Rohlinge jetzt gleich wieder umtauschen oder hilft mir ein Update für Nero oder ein Treiber Update für meinen Brenner weiter?

Hoffe ihr könnt mir weiterhelfen!!! :bow:

Intenso ist Müll, weil die immer die billigsten Rohlinge von anderen Herstellern aufkaufen und dann unter ihrem Namen vermarkten.
Du weisst also nie was Du bekommst.

Kaufe Qualitätsmedien - CD-RW ist heute so billig wie nie.

Poste mal nen Nero log.

Zum Thema Intenso muß ich auch noch mal einen Rohling mit meiner Digicam knipsen und das Bild veröffentlichen. Man kann vom Rand aus richtig die Verfärbungen sehen.

Direkt nach dem Brennen war die DVD 100% lesbar. Mittlerweile 0%

Hmm… OK, meint ihr dann es liegt an “intens0”? Vielleicht liegt der Fehler auch ganz woanders!?
Ich hätte hier eine Nero-Log von meinem Problem; hoffe irgendjemand wird daraus schlau:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.57 (1008), size=48128 bytes, created 23.12.1997 02:23:24
ahead WinASPI: File ‘D:\programme
ero\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16.12.2003 19:18:06
Nero Version: 6.3.1.6 (Nero Express)
Rekorder: <LG CD-RW CED-8080B> Version: 1.08 - HA 1 TA 1 - 6.3.1.6
Adapter-Treiber: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-608 >Version: 1.3 - HA 1 TA 0 - 6.3.1.6
Adapter-Treiber: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-608 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LG CD-RW CED-8080B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-608 E: CDRom0
LG CD-RW CED-8080B F: CDRom1
AXV CD/DVD-ROM G: CDRom2

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 296MB (304092kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.11.2005
Video CD
18:17:46 #1 Text 0 File VCDDoc.cpp, Line 1453
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : FALSE
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

18:17:46 #2 Phase 82 File dlgbrnst.cpp, Line 1841
Encoding video

18:17:46 #3 Text 0 File VCDCompilationImpl.cpp, Line 489
Using Nero Video Converter version 0.00

18:17:55 #4 Text 0 File AVIVCDFileItem.cpp, Line 879
Encoding D:\videos\Filme\Arrissalah (Disc 1 of 3).avi to C:\DOKUME~1\dumbass\LOKALE~1\Temp\NER9.tmp
ScalingType: 0 Video: yes Audio: yes
File size: 243169280 bytes
Resolution: 480x320 25 Hz
Frames: 85211

18:17:55 #5 Text 0 File AVIVCDFileItem.cpp, Line 892
Playing time: 3408,440000 s
Requested rate: 225 KB/s
iVideoRate=0
iAudioRate=32
Estimated size: 255633 blocks

18:51:25 #6 Text 0 File AVIVCDFileItem.cpp, Line 921
Encoding done

18:53:14 #7 Text 0 File VCDFileItem.cpp, Line 355
Actual size: 255661 blocks

18:53:14 #8 Text 0 File VCDFileItem.cpp, Line 359
The generated Video file is 0,999992 of the evaluated size

18:53:21 #9 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

18:53:22 #10 Text 0 File VCDDoc.cpp, Line 2735
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------

18:53:23 #11 Text 0 File Reader.cpp, Line 118
Reader running

18:53:23 #12 Text 0 File Writer.cpp, Line 124
Writer LG CD-RW CED-8080B running

18:53:24 #13 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

18:53:24 #14 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

18:53:24 #15 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-Once, using CD-R/RW media

18:53:26 #16 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 257199 ( 57:11.24)

18:53:26 #17 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

18:53:26 #18 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LG CD-RW CED-8080B;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:53:26 #19 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:53:26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1299 (1299) = #1299/0:17.24
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1299 blocks [LG CD-RW CED-8080B ]
1: TRM_DATA_MODE2_2336 (Arrissalah (Disc 1 of 3))
2 indices, index0 (150) not provided
original disc pos #0 + 255751 (255751) = #255751/56:50.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 255751 blocks [LG CD-RW CED-8080B ]
--------------------------------------------------------------

18:53:26 #21 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LG CD-RW CED-8080B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3408048, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3408048 3760848 605287200, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1299 | 2 | 0 | 0x00 | 0x41
1449 | 2 | 1 | 0x00 | 0x41
257200 | lead-out | 1 | 0x00 | 0x41

18:53:26 #22 Phase 73 File dlgbrnst.cpp, Line 1841
Preparing items

18:53:38 #23 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

18:53:38 #24 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

18:53:38 #25 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

18:53:38 #26 Phase 28 File dlgbrnst.cpp, Line 1841
Speed measurement started

18:53:38 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:53:38 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1449

18:55:49 #29 Text 0 File WriterStatus.cpp, Line 115
<LG CD-RW CED-8080B > start writing Lead-Out at LBA 257200 (3ECB0h), lenght 0 blocks

18:55:49 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:55:50 #31 Phase 29 File dlgbrnst.cpp, Line 1792
Speed measurement completed: 36,3x (5.446 KB/s)

18:55:50 #32 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 2x (300 KB/s)

18:55:50 #33 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

18:55:50 #34 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1449

18:55:50 #35 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

18:55:50 #36 Text 0 File Mmc.cpp, Line 15555
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 18
41 02 01 21 00 00 15 18
41 aa 01 34 00 39 0b 19

18:55:58 #37 SCSI -1119 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04A10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x00

18:55:59 #38 CDR -1119 File Writer.cpp, Line 304
Track following error

18:55:59 #39 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:55:59 #40 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

18:56:00 #41 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 2x (300 KB/s)

18:56:00 #42 Text 0 File AVIVCDFileItem.cpp, Line 985
Temporary file C:\DOKUME~1\dumbass\LOKALE~1\Temp\NER9.tmp deleted

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.57 (1008), size=23936 bytes, created 23.12.1997 03:02:46
File ‘Drivers\atapi.sys’: Ver=?.?.?.?, size=95360 bytes, created 04.08.2004 06:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:

Also ein “Track following error”, doch nichts mit Geschwindigkeitsproblem oder wie??

Und hier der versprochene Scan. Die Beschriftung habe ich allerdings unkenntlich gemacht.

Man beachte die starken Verfärbungen am Rand auf der rechten Seite des Rohlings. In Natura sieht’s noch ein wenig schlimmer aus.


Eindeutig Schrottmedien, dazu noch ein veraltetes Nero…