Samsung SH-S182M Not burning

I try to burn on DVD+R with Nero & ImgBurn with all speed 2X to 16X but isn’t start to burning.

*Links removed due to popups *

Nero InfoTool:

Nero InfoTool 4.4.0.0

Drive Information

Drive : TSSTcorp CD/DVDW SH-S182M
Type : DVD±R/RW DL Recorder
Firmware Version : SB05
Buffer Size : 2 MB
Date : ?
Serial Number : SH-S182MFirmware
Vendor Specific : 0615
Drive Letter : L:
Location : 2:0
Mechanism : Tray
Read Speed : 12.0 , 10.0 , 8.0 , 6.0 , 4.0 , 2.0 X
Write Speed : 16.0 , 12.0 , 8.0 , 4.0 X

Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : Yes
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD-R DL : Yes
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes

Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD-R DL : Yes
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : Yes
Write DVD-RAM : Yes
Write BD-R : No
Write BD-RE : No
Write HD DVD-R : No
Write HD DVD-RW : No
Write HD-BURN-R : No
Write HD-BURN-RW : No
Buffer Underrun Protection : Yes
Mount Rainier : Yes
SolidBurn : No
Labelflash : No
LightScribe : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96

Region Protection Control : RPC II
Region : None
Changes User : 5
Changes Vendor : 4

CSS : Yes
CPRM : Yes
AACS : No
VCPS : No

Nero log error:

IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0

Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 2 TA 2 - 7.9.6.0
Adapter driver: <USB 2.0> HA 2
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL12 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00FJA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST340810A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182M L: CdRom10
HL-DT-ST DVDRAM GSA-H10N Z: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523552kB)
Free physical memory: 148MB (151780kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.7.2007
Burn DVD Image
6:17:58 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:17:59 PM #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

6:17:59 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2040895 (453:31.70, 3986MB)

6:17:59 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

6:17:59 PM #5 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7

6:17:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<

6:17:59 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 2040896 (2040896) = #2040896/453:31.71
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2040896 blocks [L: TSSTcorp CD/DVDW SH-S182M]

6:18:00 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [L: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4179755008, ISRC “”
DAO layout:

__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2040896 | 2040896 | 0x00
2040896 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

6:18:00 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

6:18:00 PM #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-No, small files-No (<64KB)

6:18:00 PM #11 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22,160 KB/s)

6:18:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:18:00 PM #13 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 …MBIPG101R05.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:18:00 PM #14 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 …MBIPG101R05.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:18:00 PM #15 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 …MBIPG101R05.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:18:00 PM #16 Text 0 File DVDR.cpp, Line 8372
Drive: TSSTcorp CD/DVDW SH-S182M
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

6:18:00 PM #17 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM

6:18:00 PM #18 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

6:18:00 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

6:18:35 PM #20 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom10: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x059f0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

6:18:35 PM #21 CDR -1106 File Writer.cpp, Line 303
Power calibration error
L: TSSTcorp CD/DVDW SH-S182M

6:18:37 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom10: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06

6:18:37 PM #23 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders

6:18:37 PM #24 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

6:18:37 PM #25 CDR -1046 File WriterStatus.cpp, Line 162
Illegal disc
L: TSSTcorp CD/DVDW SH-S182M

6:18:37 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

6:18:39 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 16x (22,160 KB/s)

6:18:40 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:18:52 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

6:18:52 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Hi and Welcome!

how is your drive connected? It is not listed in the “SCSI device map” of your Nero log.

Michael

is USB Type (External)

This might be the problem. The Samsung is very picky about the IDE/USB bridge chip. Make sure, the drive is jumpered to master in your enclosure.

In addition, try the drive installed internally, as this would sort out any USB related issues. And try other media, preferably Verbatim DVD+R.

Michael

how to do that?

Is that a retail external Samsung drive (SE-S184M) or an internal drive that is installed into an external case. If the latter is true, remove the drive from there and replace your internal drive by the Samsung.

My Samsung drive (SE-S184M) only put for external .

Okay. Then the thread title was slightly misleading. In that case, please try the unit connected to another computer to sort out issues that are related to your system at all.

I try it before,it have same problem

You already posted the same here.

You know why I locked the thread… you accepted the cdf rules, I think…

Thanks chef. Thread closed and links removed due to popups. :cop: