S:key - 03/0c/00 - "write Error"

I am getting thoses errors with Alcohol 1.4.8_2222 and using Safedisc 2/3 profile.

Theses are random errors using the exact same cdimage…

01:32:00 (E:) HL-DT-ST RW/DVD GCC-4520B(3:0) - [Write ERROR] LBA: 76976, Length: 16
S:KEY - 03/0C/00 - “Write Error”

22:43:32 (E:) HL-DT-ST RW/DVD GCC-4520B(3:0) - [Write ERROR] LBA: 271616, Length: 16
S:KEY - 03/0C/00 - “Write Error”

23:32:15 (E:) HL-DT-ST RW/DVD GCC-4520B(3:0) - [Write ERROR] LBA: 124944, Length: 16
S:KEY - 03/0C/00 - “Write Error”

I have used these princo cdr media before and they used to be working very well with that same drive.

*** Disc ATIP code information ***
ATIP Start Time of Lead-in: 97m27s28f
ATIP Last possible start time of Lead-out: 79m59s74f (LBA: 359999)
Disc Manufacturer: Princo Corporation
Disc Dye: PhthaloCyanine Material
Disc type: CD-R
Media Sub-Type: 00h
Indicative Target Write Power: 07h
Reference Speed: 00h
Unrestricated Use Disc(URU): 00h
A1 Value: 000000h
A2 Value: 000000h
A3 Value: 000000h
Maximum Read Speed Supported (with current disc): 40X (6000 KB/Sec)
Maximum Write Speed Supported (with current Disc): 40X (6000 KB/Sec)
Current Read Speed Supported (with current Disc): 40X (6000 KB/Sec)
Current Write Speed Supported (with current Disc): 4X (600 KB/Sec)

Few tests i did :

The simulated recording working very fine :
00:08:31 (E:) HL-DT-ST RW/DVD GCC-4520B(3:0): Simulated recording completed!
00:08:31 Elapsed Time: 00:20:01, Average speed: 4.0X
00:08:33 All recording procedures have been completed!
00:08:33 Elapsed Time: 00:20:01

Also, If i record the exact same image over a CDRW, there’s no error at all during the recording…

I have scrapped around 5 CDR :frowning:

Any idea ?