RITEK S04 (DL) & Pioneer 111L = burn won't start

vbimport

#1

[qanda]This thread is about the Pioneer DVR-111 / DVR-A11. Click here to see full specs[/qanda]

Brand is TDK, unfortunately it’s Ritek :Z

Just want to fix the problem, don’t want to waste this DL.


9:56:14 AM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 1042
	Prepare recorder [PIONEER  DVD-RW  DVR-111L] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8547893248, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 4173776 | lead-out |   1 |    0x41 | 0x00
	
9:56:14 AM	#10 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 8x (11,080 KB/s)
	
9:56:14 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 2604
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
9:56:14 AM	#12 Text 0 File DVDPlusDualLayer.cpp, Line 395
	Disc finalized, LBA total Image size: 4173776 (8151MB), Last LBA L0: 2086895 (4075MB)
	
9:56:31 AM	#13 SCSI -1106 File Cdrdrv.cpp, Line 1178
	SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05DE0C00
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 
	            0x00 0x00 0x00 0x00 0x73 0x03 
	
9:56:31 AM	#14 Text 0 File DVDPlusDualLayer.cpp, Line 479
[B]	L0 Data Zone Capacity set to 2086896 (1FD7F0h, 4075MB) -> ERROR, capacity different:
	  L0 Data Zone Capacity on disc:             2086912 (1FD800h, 4076MB)
	  L0 Data Zone Capacity requested to be set: 2086896 (1FD7F0h, 4075MB)[/B]
	
9:56:31 AM	#15 CDR -1106 File ThreadedTransferInterface.cpp, Line 1764
	Power calibration error
	
9:56:31 AM	#16 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1764
	Could not perform start of Disc-at-once
	
9:56:31 AM	#17 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 8x (11,080 KB/s)


                            Media Information                            
Region information                                    N/A not a DVD-VIDEO
Media code/Manufacturer ID                                    RITEK   S04
Media Product Revision Number                                         42h
Format Capacity                                                Blank Disc
Free Blocks                                                    4253024256
Free Capacity                                              7.96GB(8.55GB)
Book Type                                                        DVD+R DL
Media Type                                                       DVD+R DL
Manufacturer Rated Speed                                          Unknown
Available Write Descriptor                           CLV  8.0x  11080KBps
Available Write Descriptor                           CLV  6.0x   8310KBps
Available Write Descriptor                           CLV  4.0x   5540KBps
Available Write Descriptor                           CLV  2.4x   3324KBps
Data area starting sector                                          30000h
Layer 0 end sector                                                22D7FFh
Linear Density                                                0.293um/bit
Track Density                                                0.74um/track
Number of Layers                                                        2
Layer Track Path direction                      (OTP) Opposite track path
                                                                         
                           Complete Media Code                           
00000000 08 02 00 00 E1 0F 32 10 00 03 00 00 00 FC FF FF ......2.........
00000010 00 22 D7 FF 00 00 03 52 49 54 45 4B 00 00 00 53 .".....RITEK...S
00000020 30 34 42 40 25 25 37 10 00 2C 6C 00 2C 6C 20 1F 04B@%%7..,l.,l .
00000030 0C 0C 14 14 02 01 01 20 00 20 1F 0C 0C 14 14 02 ....... . ......



#2

Suspected problem:


L0 Data Zone Capacity set to 2086896 (1FD7F0h, 4075MB) -> ERROR, capacity different:
  L0 Data Zone Capacity on disc:             2086912 (1FD800h, 4076MB)
  L0 Data Zone Capacity requested to be set: 2086896 (1FD7F0h, 4075MB)

But I’m burning a single video file which is 7.84GB…


#3

Log from Nero 9094…



Windows Vista 6.0
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100

Recorder:             <PIONEER DVD-RW  DVR-111L>Version: 8.29 - HA 1 TA 0 - 9.0.9.100
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2000kB
 Bus Type      :      default
CD-ROM:               <GPK      QJKTQ7O5YRO     >Version: 1.03 - HA 1 TA 1 - 9.0.9.100
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Volume0                         iaStor Port 0 ID 0  DMA: On 
DiskPeripheral       : WDC WD6401AALS-00L3B2           iaStor Port 0 ID 1  DMA: Off
DiskPeripheral       : Maxtor 6V300F0                  iaStor Port 0 ID 2  DMA: Off
CdRomPeripheral      : GPK     QJKTQ7O5YRO     1.03  ancvv14p Port 4 ID 0  DMA: Off
CdRomPeripheral      : GPK     QJKTQ7O5YRO     1.03  ancvv14p Port 4 ID 1  DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW  DVR-111L   G:   CdRom0
GPK QJKTQ7O5YRO            B:   CdRom1
GPK QJKTQ7O5YRO            H:   CdRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 4095MB (4194303kB)
Free physical memory: 3313MB (3393160kB)
Memory in use       : 46 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

10.12.2008
UDF compilation
12:29:24 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 450
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
12:29:25 PM	#2 Text 0 File Isodoc.cpp, Line 6789
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : pure
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	
12:29:25 PM	#3 Text 0 File Burncd.cpp, Line 3563
	Turn on Disc-At-Once, using DVD media
	
12:29:25 PM	#4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
	FS Settings: using validator 'CUDFSettingsValidatorDVD'
	ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
	Changing UDF revision from '1.02' to '1.02'
	
12:29:25 PM	#5 Text 0 File DlgWaitCD.cpp, Line 312
	Last possible write address on media:  4173823 (927:30.73, 8151MB)
	Last address to be written:            4173775 (927:30.25, 8151MB)
	
12:29:25 PM	#6 Text 0 File DlgWaitCD.cpp, Line 324
	Write in overburning mode: NO (enabled: CD)
	
12:29:25 PM	#7 Text 0 File DlgWaitCD.cpp, Line 2951
	Recorder: PIONEER DVD-RW  DVR-111L, Media type: DVD+R DL
	 Disc Manufacturer ID: <RITEK>, Media Type ID: <S04>, Product revision number: 66
	 Disc Application Code: 0, Extended Information Indicators: 3
	
12:29:25 PM	#8 Text 0 File DlgWaitCD.cpp, Line 499
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
12:29:25 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 756
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 4173776 (4173776) = #4173776/927:30.26
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4173776 blocks [G: PIONEER DVD-RW  DVR-111L]
	--------------------------------------------------------------
	
12:29:25 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 958
	Prepare [G: PIONEER DVD-RW  DVR-111L] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8547893248, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  4173776 |        0 | 0x00
	  4173776 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
12:29:25 PM	#11 Text 0 File SCSIPTICommands.cpp, Line 240
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
12:29:25 PM	#12 Text 0 File Burncd.cpp, Line 4362
	Caching options: cache CDRom or Network-No, small files-No (<64KB)
	
12:29:25 PM	#13 Phase 36 File dlgbrnst.cpp, Line 1767
	Burn process started at 8x (11,080 KB/s)
	
12:29:25 PM	#14 Text 0 File ThreadedTransferInterface.cpp, Line 2675
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
12:29:25 PM	#15 SPTI -1066 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x06181fc0: Len x648
	
12:29:25 PM	#16 Text 0 File DVDPlusDualLayer.cpp, Line 1856
	GetDriveCaps: LAST LBA of layer 1 is 0
	
12:29:25 PM	#17 Text 0 File DVDPlusDualLayer.cpp, Line 1424
	SetDriveCaps: Set LAST LBA of layer 1 to 2086895
	
12:29:25 PM	#18 Text 0 File DVDPlusDualLayer.cpp, Line 1856
	GetDriveCaps: LAST LBA of layer 1 is 2086895
	
12:29:25 PM	#19 Text 0 File DVDPlusDualLayer.cpp, Line 592
	Disc finalized, LBA total Image size: 4173776 (8151MB), Last LBA L0: 2086895 (4075MB)
	
12:29:37 PM	#20 SPTI -1106 File SCSIPassThrough.cpp, Line 215
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	CDB Data:   0xBF 00 00 00 00 00 00 20 00 0C 00 00 
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 73 03 
	Buffer x06193900: Len xc
	0x00 0A 00 00 00 00 00 00 00 1F D7 F0 
	
12:29:37 PM	#21 Text 0 File DVDPlusDualLayer.cpp, Line 768
	L0 Data Zone Capacity not set.
	Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
	
12:29:37 PM	#22 Text 0 File DVDPlusDualLayer.cpp, Line 1424
	SetDriveCaps: Set LAST LBA of layer 1 to 0
	
12:29:37 PM	#23 CDR -1106 File ThreadedTransferInterface.cpp, Line 1682
	Power calibration error
	G: PIONEER DVD-RW  DVR-111L
	
12:29:37 PM	#24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682
	Could not perform start of Disc-at-once
	
12:29:37 PM	#25 Text 0 File DVDPlusDualLayer.cpp, Line 1424
	SetDriveCaps: Set LAST LBA of layer 1 to 0
	
12:29:37 PM	#26 Text 0 File ThreadedTransfer.cpp, Line 273
	Pipe memory size 83836800
	
12:29:37 PM	#27 Phase 38 File dlgbrnst.cpp, Line 1767
	Burn process failed at 8x (11,080 KB/s)
	
12:29:37 PM	#28 Text 0 File SCSIPTICommands.cpp, Line 287
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
12:29:37 PM	#29 Text 0 File Cdrdrv.cpp, Line 11444
	DriveLocker: UnLockVolume completed
	
12:29:37 PM	#30 Text 0 File SCSIPTICommands.cpp, Line 450
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


By comparsion, Nero 9 has no improvement over Nero 6 what-so-ever :clap:


#4

@ totalz,

Suggest performing a Google Search (http://www.google.com) on the topic ‘RITEK S04’ and you will see this is poor quality problematic Media.

It has been passed numerous times that the only DL Media that consistently produces quality error free results is Verbatim DL MKM001/MKM003 Mitsubishi Kagaku Media. All other DL Media is considered suspect and should be avoided (not used).

Regards,
bjkg


#5

[QUOTE=bjkg;2173479]@ totalz,

Suggest performing a Google Search (http://www.google.com) on the topic ‘RITEK S04’ and you will see this is poor quality problematic Media.

It has been passed numerous times that the only DL Media that consistently produces quality error free results is Verbatim DL MKM001/MKM003 Mitsubishi Kagaku Media. All other DL Media is considered suspect and should be avoided (not used).

Regards,
bjkg[/QUOTE]

Well, unfortunately, the media code is not stamp on the disc or the box. u think i would want to buy this shxt, lol :rolleyes:


#6

@ totalz,

Although ‘The Box’ of TDK DVD+R DL Media did not have the ‘RITEK S04’ Media Code printed on exterior of ‘The Box’ it should also be noted that ‘The Box’ did not have the brand name ‘Verbatim’ and/or the ‘Mitsubishi Kagaku Media’ manufacture name printed on the exterior of the box.

It’s rather difficult to expect to purchase Verbatim Mitsubishi Kagaku Media when the exterior box lacks the Brand Name Verbatim and/or Manufacture Name Mitsubishi Kagaku Media printed on the exterior of the Media package.

Regards,
bjkg