Ritek DVD-R

vbimport

#410

Or maybe those shrink packs aren’t protecting good enough.


#411

It is quite possible, edges are only protected by the thin foil…


#412

And the discs can be pressed together.
In a spindle not possible.


#413

Writer: LG GTB0N
Firmware 1.00
Media: Ritek DVD-R 16x Thermo Printable
MID: (RITEKF1)
Burn Speed: 8x
Software: Nero 7
Burned 2017
Scanned 2017


#414

Writer: LiteOn DS8A8SH
Firmware KAA2
Media: Ritek DVD-R 16x Thermo Printable
MID: (RITEKF1)
Burn Speed: 8x
Software: Nero 7
Burned 2017
Scanned 2017


#415

Writer: Panasonic UJ8E1
Firmware 1.00

Media: Ritek DVD-R 16x Thermo Printable
MID: (RITEKF1)
Burn Speed: 8x
Software: Nero 7
Burned 2017
Scanned 2017


#416

Writer: LiteOn DS8A8SH
Firmware KAA2
Media: Ritek DVD-R 8x Printable
MID: (RITEKG05)
Burn Speed: 8x
Software: Nero 7
Burned 2017
Scanned 2017

The media came in a shrink pack and some of them shows damages, that´s the reason for the PIF-clusters at the end


#417

Writer: LG GTB0N
Firmware 1.00
Media: Ritek DVD-R 8x Printable
MID: (RITEKG05)
Burn Speed: 8x
Software: Nero 7
Burned 2017
Scanned 2017

The media came in a shrink pack and some of them shows damages, that´s the reason for the PIF-clusters at the end


#418

Writer: Panasonic UJ8E1
Firmware 1.00
Media: Ritek DVD-R 8x Printable
MID: (RITEKG05)
Burn Speed: 8x
Software: Nero 7
Burned 2017
Scanned 2017

The media came in a shrink pack and some of them shows damages, that´s the reason for the PIF-clusters


#419

Writer: Samsung SH-224FB
Media: Maxell DVD-R
MID: RITEKF1
Writing speed: 8x
Software: Burnaware Free
Burned: 2017
Scanned: 2017

Unusually high PIE values at the beginning.


#420

SK 16x DVD-R / RITEKF1

Burned with BenQ DW1640 @8x





#421

Writer: LG GH24NSC0
Firmware: LK00
Media: Ritek DVD-R 16x Thermo Printable
MID: (RITEKF1)
Burn Speed: 16x
Software: Nero 7
Burned 2017
Scanned 2017

Good one for this media


#422

Writer: Benq 1650
Firmware: BCIC
Media: Conmark DVD-R
MID: (RITEKG03)
Burn Speed: 2,4x
Software: Nero 12 Ess.
Burned 2017
Scanned 2017

G03 can be good if you don´t read it a full speed (Liteon don´t like that)


#423

Writer: Optiarc AD-7283S
Firmware: 1.01
Media: Ritek DVD-R 16x Thermo Printable
MID: (RITEKF1)
Burn Speed: 12x
Software: Nero 7
Burned 2017
Scanned 2017

The 7283S is with F1 far away from some of my other drives, again


Optiarc AD-5280S/7280S/7283S Results & Discussion
#424

Writer: Samsung SH-224FB
Media: Maxell DVD-R
MID: RITEKF1
Recording speed: x4
Burn date: 2017
Scan date: 2017


Samsung SH-224FB
#425

Writer: Samsung SH-224FB
Media: Maxell DVD-R
MID: RITEKF1
Recording speed: x4
Burn date: 2017
Scan date: 2017


Samsung SH-224FB
#426

That´s a good result with a Samsung. I stopped burn F1 with Samsung because I don´t get good results at higher speeds.

PI is usually higher with F1, but my LG and my Pioneers like it much more than Samsung and Liteon


#427

Regardless of the chosen speed there are high PI errors at the begging, gradually dropping to the 1GB mark. They range between 60-150 depending on the quality of the inserted disc. The PI failures are in the average range. Pioneer 209EBK produces better results with this media but Samsung results are acceptable for me.


#428

Writer: Samsung SH-224FB
Media: Maxell DVD-R
MID: RITEKF1
Recording speed: x8
Burn date: 2017
Scan date: 2017


Samsung SH-224FB
#429

Writer: Samsung SH-224FB
Media: Maxell DVD-R
MID: RITEKF1
Recording speed: x12
Burn date: 2017
Scan date: 2017


Samsung SH-224FB