Ritek bd-r dl

vbimport

#11

Xlayer BD-R50 4x printable
RITEKDR2
Pioneer BDR[B]208[/B]DBK
FW: latest
Speed 4x

The layer change looks a bit more critical than before with the BDR207, which has the newer firmware, compared to the BDR208 and many other writers.
That might explain the difficulties at the layer change with this RITEK mediacode some customers report in their evaluations.:confused:

So I will put aside these RITEKDR2 for the BDR207 until further notice.



#12

2x Xlayer BD-R50 4x printable
RITEKDR2
Pioneer BDR[B]207[/B]DBK
FW: 1.35
Speed 4x




#13

Xlayer BD-R50 4x labeled
MID: RITEKDR2
Writer: Pioneer BDR[B]207[/B]DBK
FW: 1.35
Writing speed: 4x

[B]Bad to the bone![/B] :eek: :Z



#14

Lite-On iHBS212 HL05, 44, 54 GB burned at 4x

sold as unbranded 4x Ritek BD-R DL
MID: RITEKDR2
perfect TRT




#15

Plextor BD-R PX-LB950SA 1.06, 45,50 GB burned at 4x

sold as unbranded 4x Ritek BD-R DL
MID: RITEKDR2
perfect TRT




#16

Optiarc BD-5300S 1.06, 47 731MB burned at 4x

sold as unbranded 4x Ritek BD-R DL
MID: RITEK-DR2-000

hub code: LCC01407DLBD034X12122801D
stamper code: RBD04DRL0_03A / RBD04DRL1_05

Thanks Pepst :flower:






#17

Primeon 50GB 8x / RITEKDR3

Burned with Pioneer BDR-209EBK @ 4x



#18

Primeon 50GB 8x / RITEKDR3

Burned with LiteOn iHBS112 @ 4x


#19

Primeon 50GB 8x / RITEKDR3

Burned with Pioneer BDR-209EBK @ 8x



#20

Primeon 50GB 8x / RITEKDR3

Burned with Pioneer BDR-209EBK @ 2x



#21

Xlayer 50GB 4x / RITEKDR2

Burned with Pioneer BDR-209EBK @4x


#22

Xlayer 50GB 4x / RITEKDR2

Burned with LiteOn iHBS112 @4x


#23

The Pioneer-burn looks like the scanner “see” data in unburned area. Reminds me of a scan with a partial written RE.


#24

So maybe it’s not the discs fault?
Normally i burn data with Nero.
This time it was an ISO image with Imgburn.


#25

Did the burn stopped immediately after the Layer Break? Did you stop the scan manual? If the scan shows this long max. DC 9728 and BIS 768 I would say the part of the disc was not burned or is real trash


#26

The Pioneer stopped at layer break, the LiteOn burned till the end.

The Pioneer scan i stopped manually, LiteOn had error.

Will test the image on a RE.


#27

OK, thought this, the Lite don´t see the end of writing area and scanned unburned part


#28

The image is 46.61GB, but when I extract the files, it’s only 41.3GB… weird.
The burned disc shows a size of 46.61GB, too but when I look at the files, it’s again 41.3GB und I can copy all to HDD without error.
So maybe the missing 5.3GB is some dummy data, which is seen as errors in scanning?


#29

Image of the source file or from one of your burns?


#30

An image a friend gave me on USB stick to burn for him.

But that was not the problem… the problem was 8x scanning and a really bad quality of the disc.

Here a scan with 4x