Reads fine but burns bad

vbimport

#1

Hi Guys.
It has been a while since the last time i needed help with burning issus.
I am use to burn dvd films with “CloneDvd2” and “AnyDvd”, without problems.
But now it seems that maybe my burner is getting behind or maybe the protections are getting tougher.

I got a “Liteon LH-20A1S”, witch has been working fine until now.
There is no problem in reading the dvd to the clonedvd temporary directory.
But when i try to burn to the discs it sometimes, stop in the middle and tells me something has gone wrong and the disc maybe isn’t good enough for burning.
Its the same type of discs i always uses “Q-Daq 1-8X 4,7GB +R”
I am usually burning at speed 6x, to be sure nothing goes wrong.

Sometimes it works just by trying again with a fresh disc from the bunch.

The movies witch are getting the error is:
Spiderman 3
Hoodwinked
Asterix movies
flushed away
and especially disney special edition movies.

Other movies are working fine like:
the mask
lilo and stich
treasure-planet
simpson the movie
sharks tale
anastasia

Got any suggestion? i was thinking maybe buying a new burner. the one i got now is about half a year old.

Thanks in advance :clap:
Frede


#2

The quality of your discs is highly suspect. I recommend using Tys or Verbatims. Your burner may or may not be on the fritz and until you use known quality media, you won’t know.


#3

Hi. i understand your concern, but it is the same disc as i always use, and they are out of the same bunch…
i got a hole stack of movies and it seems that now i cant burn anymore… it simply wont work anymore…

i have tried to create an iso with clonedvd, and burn with nero… didn’t work either. Please see error log below…
I don’t know if it mean anything to you, and cant figure it out anyway…

1C80-0000-19E5-MA2X-4002-0464-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <LITE-ON DVDRW LH-20A1S> Version: 9L09 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW LH-20A1S >Version: 9L09 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW LH-20A1S atapi Port 2 ID 0 DMA: On
DiskPeripheral : SiImage Si3132r5 Port 4 ID 16 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3132r5 Port 4 ID 31 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1S E: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096164kB)
Free physical memory: 1413MB (1447816kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.5.2008
Brænd DVD-image
20:38:36 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

20:38:37 #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

20:38:37 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285765 (507:56.65, 4464MB)

20:38:37 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

20:38:37 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: LITE-ON DVDRW LH-20A1S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

20:38:37 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:38:37 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285766 (2285766) = #2285766/507:56.66
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285766 blocks [E: LITE-ON DVDRW LH-20A1S]
--------------------------------------------------------------

20:38:37 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: LITE-ON DVDRW LH-20A1S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681248768, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2285766 | 2285766 | 0x00
2285766 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

20:38:37 #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

20:38:37 #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

20:38:37 #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

20:38:37 #12 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

20:38:37 #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

20:38:37 #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 6x (8.310 KB/s)

20:38:37 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

20:38:37 #16 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MCC…
Media type ID: 003
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 …MCC…003.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7…Rl…c…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

20:38:37 #17 Text 0 File DVDR.cpp, Line 7098
Drive: LITE-ON DVDRW LH-20A1S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0

20:38:37 #18 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM

20:38:37 #19 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

20:38:37 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

20:39:37 #21 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 01 37 60 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x0bf82f80: Len x10000
0x00 00 01 BA 44 00 F7 37 B6 43 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 01 D0 E8 00 7A 3A 22 CD 5B
0x00 E2 A2 C0 6C 3A 1D 0F A7 00 00 01 1B 23 DC 38

20:39:37 #22 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
E: LITE-ON DVDRW LH-20A1S

20:39:42 #23 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders

20:40:42 #24 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 79712

20:40:42 #25 Phase 129 File dlgbrnst.cpp, Line 1762
Generating DVD borders completed successfully

20:40:42 #26 Text 0 File DVDR.cpp, Line 7098
Drive: LITE-ON DVDRW LH-20A1S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0

20:40:42 #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 6x (8.310 KB/s)

20:40:43 #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

20:40:48 #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

20:40:48 #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#4

I have the same problem…seems like since I upgraded to the latest version, I cant burn anything. I can make iso’s, but I’ve coasterd 10 disc on 4 different brands and cant figure it out. EVERYTIME I get a media write fail.


#5

what you failed to mention is what version of Anydvd, CloneDVD, or CloneCD version your using to help us identify what if any version is causing your problem. And what specs is your system as well? And if you installed any recent program or changes to your sytem? Also what current O/S are you using?


#6

Version 2.9.1.7 2008 04 09
[B]New: CloneDVD no longer uses the Windows filesystem, when reading from a Video DVD. It has now its own UDF parser / reader. [/B]Discs which cannot be read by Windows can now be copied with CloneDVD.

Just to check, go into your preferences, and check the setting: “Use File System instead of Internal I/O”

I had a problem where all the DVDs I was backing up since that update, were getting gaps in them and not playing all the way through (seemed to burn fine but when playing it would hit a gap like I mentioned above and stopped playing).

Not exactly like the problem you are having, but I wouldnt be surprised if the new UDF parser/reader they switched to is causing more problems then just what I was having.

If changing this works, good deal, if not, just keep posting here and I’m sure someone else can help resolve it eventually.

EDIT: Hmmmm…you tried burning with nero too and it didnt work? Not sure what to tell ya, the problem I was having (before I got it fixed), I was able to burn fine w/ Nero.