Question of Output of DVDFab - Good Luck Chuck

I’m newbie of DVDFab. I tried to rip “Good Luck Chuck” I purchased, and that was successfully and completed. I am very sure of the Pathfinder is enable while I backup.

No doubt of DVDfab can handle with latest protections such as Acrros and X-Protect for ripping part. Only one thing I wondering is the output of DVDFab, seems like is impacted with AnyDVD any version.

That may have two ways - 1. DVDFab didn’t kill or clean up the protections clearly; or 2. Anydvd doesn’t like the output of DVDFab.

There are my evidences.
This is original DVD I bought.

Summary for drive J: (AnyDVD 6.3.0.3)
SONY DVD RW DRU-810A 2.0B AUG11 ,2005
Drive (Hardware) Region: 1

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2084960 sectors (4072 MBytes)
Total size: 4034816 sectors (7880 MBytes)

Video DVD (or CD) label: Good_Luck_Chuck_16x9_Unrated
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!

RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Changed firstplay: Jump directly to TitleMenu!
UDF filesystem patched!
Autorun not found on Video DVD.
Found & removed 7 potential bad sector protections!
Emulating RPC-2 drive with region 1!


This is my backup.

Summary for drive J: (AnyDVD 6.3.0.3)
SONY DVD RW DRU-810A 2.0B AUG11 ,2005
Drive (Hardware) Region: 1

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2046208 sectors (3996 MBytes)
Total size: 3864384 sectors (7547 MBytes)

Video DVD (or CD) label: GOOD_LUCK_CHUCK
Media is not CSS protected.
Video Standard: NTSC
Media is region free.

RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Autorun not found on Video DVD.
Found & removed 5 potential bad sector protections!
Emulating RPC-2 drive with region 1!

Please someone help!

[QUOTE=Fancy;1979673]I’m newbie of DVDFab. I tried to rip “Good Luck Chuck” I purchased, and that was successfully and completed. I am very sure of the Pathfinder is enable while I backup.

No doubt of DVDfab can handle with latest protections such as Acrros and X-Protect for ripping part. Only one thing I wondering is the output of DVDFab, seems like is impacted with AnyDVD any version.

That may have two ways - 1. DVDFab didn’t kill or clean up the protections clearly; or 2. Anydvd doesn’t like the output of DVDFab.

There are my evidences.
This is original DVD I bought.

Summary for drive J: (AnyDVD 6.3.0.3)
SONY DVD RW DRU-810A 2.0B AUG11 ,2005
Drive (Hardware) Region: 1

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2084960 sectors (4072 MBytes)
Total size: 4034816 sectors (7880 MBytes)

Video DVD (or CD) label: Good_Luck_Chuck_16x9_Unrated
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!

RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Changed firstplay: Jump directly to TitleMenu!
UDF filesystem patched!
Autorun not found on Video DVD.
Found & removed 7 potential bad sector protections!
Emulating RPC-2 drive with region 1!


This is my backup.

Summary for drive J: (AnyDVD 6.3.0.3)
SONY DVD RW DRU-810A 2.0B AUG11 ,2005
Drive (Hardware) Region: 1

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2046208 sectors (3996 MBytes)
Total size: 3864384 sectors (7547 MBytes)

Video DVD (or CD) label: GOOD_LUCK_CHUCK
Media is not CSS protected.
Video Standard: NTSC
Media is region free.

RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Autorun not found on Video DVD.
Found & removed 5 potential bad sector protections!
Emulating RPC-2 drive with region 1!

Please someone help![/QUOTE]

When running DVDFab you should always shut down AnyDVD and/or other on-the-fly software

Yes, I did shot down the Anydvd while I used the DVDFab to rip my DVD.

These evidences were just I wanna point out my question.

Welcome to CDF’s:

I’ve had this same thing happen but i used AnyDVD and ImgBurn. So i guess it is normal behavior…

If you can play/copy it without AnyDVD or any protection running it’s safe to say it’s a false read…

If you look at it the protection is removed. AnyDVD just reports the other stuff as a canned read. AnyDVD does this on all read info’s.

Hope this makes sense.