Probs burning

vbimport

#1

hi i have 2 burners instaled and everything was ok
.
upgraded to vista ultimate and now nothing will burn,i keep getting reset errors or unable to burn to media errors.
only prog that will work is convertxtodvd it will convert then burn.
tried media player nero7 8 and 9 ashampoo and a couple of others.
was recomended here by ice warrior who is a member of satkings with me.
any help please


#2

Could you post a failed Nero burning log? Make sure to remove the serial number first. It just might give the people who use Nero more info to help you. You say you have tried other burning programs, which ones?


#3

s

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.10.0
Internal Version: 7, 11, 10, 0

Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 1 - 7.11.10.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <ATAPI DVD A DH20A3H >Version: YP5W - HA 1 TA 0 - 7.11.10.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 25 DMA: Off
CdRomPeripheral : ATAPI DVD A DH20A3H YP5W mv61xx Port 4 ID 4 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3520A 1.04 mv61xx Port 4 ID 5 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD A DH20A3H D: CdRom0
_NEC DVD_RW ND-3520A E: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095492kB)
Free physical memory: 1345MB (1377344kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.12.2008
CD Image
10:36:44 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:36:44 #2 Text 0 File Burncd.cpp, Line 3186
_NEC DVD_RW ND-3520A
Buffer underrun protection activated

10:36:44 #3 Text 0 File Burncd.cpp, Line 3500
Turn on Track-At-Once, using CD-R/RW media

10:36:44 #4 Text 0 File ThreadedTransferInterface.cpp, Line 1050
Removed 2 run-out blocks from end of track 1. Length: 1048 -> 1046.

10:36:44 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1050
Removed 2 run-out blocks from end of track 1. Length: 1048 -> 1046.

10:36:44 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 1047 ( 0:15.72)

10:36:44 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

10:36:44 #8 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: _NEC DVD_RW ND-3520A;
CDR code: 00 97 27 66; OSJ entry from: Ricoh Company Limited
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1B 42 (LI 97:27.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

10:36:44 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:36:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1048 (1048) = #1048/0:13.73
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1046 blocks [E: _NEC DVD_RW ND-3520A]
--------------------------------------------------------------

10:36:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [E: _NEC DVD_RW ND-3520A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2453504, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1048 | 1048 | 0x00
1048 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:36:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1050
Removed 2 run-out blocks from end of track 1. Length: 1048 -> 1046.

10:36:44 #13 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

10:36:44 #14 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

10:36:45 #15 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

10:36:45 #16 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

10:36:45 #17 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

10:36:45 #18 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 32x (4,800 KB/s)

10:36:45 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:36:45 #20 Text 0 File MMC.cpp, Line 22488
Set BUFE: Buffer underrun protection -> ON

10:36:45 #21 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

10:36:51 #22 SPTI -1114 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x08 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x09dc0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:36:51 #23 CDR -1114 File Writer.cpp, Line 306
Reset occurred
E: _NEC DVD_RW ND-3520A

10:36:51 #24 SPTI -1033 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x08 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 06 D3

10:37:08 #25 CDR -1033 File WriterStatus.cpp, Line 322
Drive not ready
E: _NEC DVD_RW ND-3520A

10:37:08 #26 TRANSFER -18 File WriterStatus.cpp, Line 322
Could not perform EndTrack

10:37:08 #27 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
E: _NEC DVD_RW ND-3520A

10:37:08 #28 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack

10:37:08 #29 Text 0 File MMC.cpp, Line 17266
<_NEC DVD_RW ND-3520A > start Close Track #2

10:37:08 #30 SPTI -1176 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x08 00 05 00 00 00 00 0A 00 00 00 00 72 04

10:37:08 #31 CDR -1176 File WriterStatus.cpp, Line 375
Session fixation error
E: _NEC DVD_RW ND-3520A

10:37:08 #32 TRANSFER -19 File WriterStatus.cpp, Line 375
Could not perform Fixation

10:37:08 #33 Text 0 File WriterStatus.cpp, Line 384
falling back to disc fixation

10:37:08 #34 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 32x (4,800 KB/s)

10:37:08 #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:37:10 #36 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed

10:37:10 #37 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

also tried nero 7 8 and 9
ashampo
media player
express rip/burn