Problems with new SH-S202H

vbimport
#1

So I bought this burner the other day as my LiteOn is starting to die. It seems to be similar to the “raved about” 203B only it’s IDE version.

Anyway, I’ve been having heaps of problems with it, such as:

  1. Writing lead-in seems to take a long time, when it succeeds.
  2. In EAC, ImgBurn and Nero sometimes it’s still writing lead-in after a few minutes and I have to switch computer off to regain control.
  3. Several EAC cue/wav images have failed to burn with ImgBurn and EAC.

I’m using Sony media which has never given me a problem before. Though I’ve tried some others without success. And these things are happening both with dvd’s and cd-r’s. Yesterday I went to backup around 1.5 gig of files onto a Sony DVD-R using Nero. The burn seemed to complete but upon verifying I got errors such as this:

4:55:35 PM	#29 SectorVerify 20 File Cdrdrv.cpp, Line 11225
	Read errors from sector 864 to 879
	
4:55:53 PM	#30 SPTI -1 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x3E
	Sense Qual: 0x02
	CDB Data:   0x28 00 00 00 04 20 00 00 10 00 00 00 
	Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 
	Buffer x05f32000: Len x8000
	
4:55:53 PM	#31 SectorVerify 20 File Cdrdrv.cpp, Line 11225
	Read errors from sector 960 to 975

Next I made an iso using ImgBurn of the exact same files and used Nero to burn the image. Upon verifying the exact same errors on the exact same sectors occured. Googling the errors it seems this can be caused by all sorts of things - bad ide cable, bad ide drivers, IMAPI service enabled (mines not), dirty lens etc. However I’m sure my hardware is fine and have swapped cables etc with no change. And there’s no other drives on the ide channels. I see there’s a couple of posts here where people found it was a bad burner to blame.

So do you think that is the case here? I know sometimes Nero itself is at fault with these things but since I’m having problems with ImgBurn and EAC as well - bad burner do you think?

#2

Here’s the full log if it helps:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4

Recorder: <TSSTcorp CDDVDW SH-S202H>Version: SB00 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <TSSTcorp CDDVDW SH-S202H >Version: SB00 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CDDVDW SH-S202H atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3250410AS atapi Port 5 ID 0 DMA: On
CdRomPeripheral : ET1261N ARF605N 1.0 abraa32p Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S202H E: CdRom0
ET1261N ARF605N H: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1423MB (1458160kB)
Memory in use : 30
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.5.2008
Burn DVD Image
8:47:37 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:47:37 AM #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

8:47:37 AM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 689631 (153:15.06, 1346MB)

8:47:37 AM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

8:47:37 AM #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S202H, Media type: DVD-R
Disc Manufacturer ID: <SONY16> <D1>
Disc Application Code: 64, Disc Physical Code: 193

8:47:37 AM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:47:37 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 689632 (689632) = #689632/153:15.7
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 689632 blocks [E: TSSTcorp CDDVDW SH-S202H]
--------------------------------------------------------------

8:47:37 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [E: TSSTcorp CDDVDW SH-S202H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1412366336, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 689632 | 689632 | 0x00
689632 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:47:37 AM #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

8:47:37 AM #10 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

8:47:37 AM #11 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

8:47:37 AM #12 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

8:47:37 AM #13 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

8:47:37 AM #14 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 16x (22,160 KB/s)

8:47:37 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:47:37 AM #16 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode for Multisession

8:47:37 AM #17 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: No

8:47:37 AM #18 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
01 40 C1 FD 9E D8 52 00 - 02 84 0E 10 87 88 80 00 .@…R…
03 53 4F 4E 59 31 36 00 - 04 44 31 00 00 00 00 00 .SONY16…D1…
05 88 80 00 00 00 01 00 - 06 09 0B 12 A8 88 90 00 …
07 88 80 00 00 00 00 00 - 08 06 13 0A 0E 08 04 00 …
09 96 06 0C 0B 70 88 00 - 0A 80 00 00 00 00 10 00 …p…
0B 08 18 17 B8 88 85 00 - 0C B6 79 0B B0 33 03 00 …y…3…
0D 30 00 D0 00 00 00 00 - 0E 0A 20 3B 37 29 1E 00 .0…;7)…
0F 50 1D 2B 15 AA B5 00 - 10 88 80 00 00 00 00 00 .P.+…
11 00 00 00 00 00 00 00 - 12 0A 2D 39 35 2B 1D 00 …-95+…
13 50 1F 2D 19 98 B5 00 - 14 88 80 00 00 00 00 00 .P.-…
15 00 00 00 00 00 00 00 - 16 09 3A 45 40 2E 27 00 …:E@.’.
17 80 21 2E 1F 78 B5 00 - 18 88 8C 00 0C 00 0C 00 …!..x…
19 00 00 00 00 00 00 00 - 1A 09 4F 47 46 38 26 00 …OGF8&.
1B 70 21 2D 1B 67 C5 00 - 1C 88 84 00 04 00 04 00 .p!-.g…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

8:47:37 AM #19 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

8:47:50 AM #20 Text 0 File Cdrdrv.cpp, Line 1367
08:47:50.390 - ã©…å å“æ”ç‰¯â°ä‘ƒå™„å„åŒ âµˆã‰“ãˆ°H : Queue again later

8:49:56 AM #21 Text 0 File WriterStatus.cpp, Line 113
<E: TSSTcorp CDDVDW SH-S202H> start writing Lead-Out at LBA 689632 (A85E0h), length 0 blocks

8:50:02 AM #22 Phase 133 File dlgbrnst.cpp, Line 1764
Writing short lead-out

8:50:28 AM #23 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was 689631 (A85DFh)Close track 1, ret: 0
Close Session/Border, function 2, track: 3, finalize disc: YES, ret: 0

8:50:28 AM #24 Phase 37 File dlgbrnst.cpp, Line 1764
Burn process completed successfully at 16x (22,160 KB/s)

8:50:28 AM #25 Phase 78 File dlgbrnst.cpp, Line 1764
Data verification started

8:50:31 AM #26 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400

8:50:49 AM #27 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 00 03 60 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x059f0080: Len x8000

8:51:06 AM #28 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 00 03 C0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x059f0080: Len x8000

8:51:06 AM #29 SectorVerify 20 File Cdrdrv.cpp, Line 11225
Read errors from sector 864 to 879

8:51:16 AM #30 Phase 40 File dlgbrnst.cpp, Line 1437
Aborted by user

8:51:24 AM #31 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 00 04 20 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x059f0080: Len x8000

8:51:24 AM #32 SectorVerify 20 File Cdrdrv.cpp, Line 11225
Read errors from sector 960 to 975

8:51:24 AM #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:51:27 AM #34 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

8:51:27 AM #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

#3

Burn process started at 16x (22,160 KB/s)
Try to burn at a slower speed.

#4

[QUOTE=Gummigutta;2049146]Try to burn at a slower speed.[/QUOTE]

I knew someone would say that. :slight_smile:

That was just a test since slower speeds weren’t working either. I just came back from exchanging the drive for another of the same model. Exactly the same thing at 8x speed. A disc scan with cdspeed shows all the discs are bad just after the beginning (around the 900 sector pos). But the rest of the data is fine. I’ve tried 3 different types/brands which have been good to me in the past, and the errors are all in the exact same place. If it was only nero playing up I could understand. But as I said even the excellent ImgBurn is freaking out sometimes, especially with audio cd images. My mobo only has a single IDE connector. There are no other drives connected to it and I only have one sata hd.

But this is looking bad.

Does anyone have some other things I could try? I’ve swapped the sata port of the hd, changed the ide cable etc. Chipset drivers are up-to-date. Don’t know what else to check.

#5

Make sure it’s not a JMICRON bus you have put the SATA burner in.

#6

It’s not a SATA burner it’s an IDE burner. I have a SATA HD.

#7

JMICRON makes IDE buses also.

#8

Well does this filter order look ok? :

===============================================
Filter Driver Load Order - ImgBurn v2.4.1.0

Upper Device Filter: redbook
Upper Class Filter: [None Found]
Device: CD/DVD-ROM Device
Lower Class Filter: cdrbsdrv
Lower Class Filter: pfc
Lower Device Filter: imapi

    Filter Name:  redbook
      File Name:  C:\WINDOWS\system32\DRIVERS\redbook.sys
   File Version:  5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: Redbook Audio Filter Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.

    Filter Name:  cdrbsdrv
      File Name:  C:\WINDOWS\system32\Drivers\cdrbsdrv.sys
   File Version:  8. 0. 0. 5 [8.0.0.5]

File Description: CD-ROM Filter Driver for Windows2000/xp
Product Name: B’s Recorder GOLD
Product Version: 8. 0. 0. 5 [8.0.0.5]
Company Name: B.H.A Corporation
Copyright: Copyright © 2000-2006 B.H.A Corporation

    Filter Name:  pfc
      File Name:  C:\WINDOWS\system32\drivers\pfc.sys
   File Version:  2, 5, 0, 204 [2.5.0.204]

File Description: Padus® ASPI Shell
Product Name: Padus® ASPI Shell
Product Version: 2, 5, 0, 204 [2.5.0.204]
Company Name: Padus, Inc.
Copyright: © Padus, Inc. 1999-2001. All rights reserved.

    Filter Name:  imapi
      File Name:  C:\WINDOWS\system32\DRIVERS\imapi.sys
   File Version:  5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: IMAPI Kernel Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.

#9

Ok, I just installed an image of my XP system from months ago when dvd burning definitely worked. I installed the newest Nero Lite onto it, and the exact same thing happened. Can someone please give me some tips on what to try to get this working please?

#10

Not-so-good media!

Get Verbatims.

But the real prioblem is the controller used!

#11

[QUOTE=chef;2049284]Not-so-good media!

Get Verbatims.

But the real prioblem is the controller used![/QUOTE]

Can you elaborate, chef? I know the media may not be the best but I’ve owned a handful of burners and they’ve never been a problem. Also, that’s just one example. I’m having problems with cd-r’s too. And what’s wrong with the controller? I was thinking of buying an IDE PCI card to test this, but it would be much cheaper to just get a SATA burner.

#12

I just went down to try and get some Verbatim dvd’s and they didn’t have any. So I bought some TDK’s, and I get the exact same error. Why do you say it’s the controller? I’ve had 2 other burners on this system without a problem. What am I to do? What can I try? Would a SATA burner work better or not? I don’t care about the money as someone could use this burner if it’s not stuffed. Would I be better off with a SATA burner? I just don’t understand the controller comment. This is a decent mobo.

And what part of the nero log tells you it’s the controller?

#13

Here’s the log for the TDK media. I really need help with this guys.

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4

Recorder: <TSSTcorp CDDVDW SH-S202H>Version: SB00 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <TSSTcorp CDDVDW SH-S202H >Version: SB00 - HA 1 TA 0 - 8.1.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CDDVDW SH-S202H atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3250410AS atapi Port 5 ID 0 DMA: On
CdRomPeripheral : ET1261N ARF605N 1.0 ajsw0yr6 Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S202H E: CdRom0
ET1261N ARF605N H: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095532kB)
Free physical memory: 1464MB (1499304kB)
Memory in use : 28
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.5.2008
UDF compilation
7:59:44 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

7:59:44 PM #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

7:59:44 PM #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

7:59:44 PM #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD’
ParamMode = ‘automatic’, changing UDF partition type from ‘physical’ to 'physical’
Changing UDF revision from ‘1.02’ to ‘1.02’

7:59:45 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 689871 (153:18.21, 1347MB)

7:59:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

7:59:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S202H, Media type: DVD-R
Disc Manufacturer ID: <TTH02> <>
Disc Application Code: 64, Disc Physical Code: 193

7:59:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:59:45 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 689872 (689872) = #689872/153:18.22
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 689872 blocks [E: TSSTcorp CDDVDW SH-S202H]
--------------------------------------------------------------

7:59:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [E: TSSTcorp CDDVDW SH-S202H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1412857856, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 689872 | 0 | 0x00
689872 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

7:59:45 PM #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

7:59:45 PM #12 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

7:59:45 PM #13 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

7:59:45 PM #14 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

7:59:45 PM #15 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

7:59:45 PM #16 Phase 28 File dlgbrnst.cpp, Line 1764
Speed measurement started

7:59:45 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:59:45 PM #18 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400

8:00:06 PM #19 Text 0 File WriterStatus.cpp, Line 113
<E: TSSTcorp CDDVDW SH-S202H> start writing Lead-Out at LBA 689872 (A86D0h), length 0 blocks

8:00:06 PM #20 Phase 29 File dlgbrnst.cpp, Line 1713
Speed measurement completed: 47x (64,978 KB/s)

8:00:06 PM #21 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 8x (11,080 KB/s)

8:00:06 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:00:06 PM #23 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode for Multisession

8:00:06 PM #24 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: No

8:00:06 PM #25 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16…783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
01 40 C1 FD 9E D8 52 00 - 02 84 0D 12 98 99 90 00 .@…R…
03 54 54 48 30 32 00 00 - 04 00 00 00 00 00 00 00 .TTH02…
05 88 80 00 00 00 02 00 - 06 09 0A 15 98 89 90 00 …
07 88 80 00 00 00 00 00 - 08 07 14 0A 0E 09 04 00 …
09 95 07 0D 0B 88 88 00 - 0A 80 00 00 00 00 10 00 …
0B 06 17 15 B8 99 85 00 - 0C B8 9A 32 03 20 32 00 …2…2.
0D 00 00 D0 00 00 00 00 - 0E 0B 21 39 35 2D 1F 00 …!95-…
0F 50 21 2D 15 98 B5 00 - 10 88 80 00 00 00 00 00 .P!-…
11 00 00 00 00 00 00 00 - 12 0B 2B 39 35 2D 1F 00 …+95-…
13 50 23 2F 19 97 B5 00 - 14 88 80 00 00 00 00 00 .P#/…
15 00 00 00 00 00 00 00 - 16 0A 3C 47 43 2C 27 00 …<GC,’.
17 80 21 2E 1A 78 B5 00 - 18 88 8C 00 0C 00 0C 00 …!..x…
19 00 00 00 00 00 00 00 - 1A 09 58 46 44 27 28 00 …XFD’(.
1B 70 21 2D 19 BA A5 00 - 1C 88 84 00 04 00 04 00 .p!-…
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

8:00:06 PM #26 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

8:00:18 PM #27 Text 0 File Cdrdrv.cpp, Line 1367
20:00:18.140 - ã©…å å“æ”ç‰¯â°ä‘ƒå™„å„åŒ âµˆã‰“ãˆ°H : Queue again later

8:02:55 PM #28 Text 0 File WriterStatus.cpp, Line 113
<E: TSSTcorp CDDVDW SH-S202H> start writing Lead-Out at LBA 689872 (A86D0h), length 0 blocks

8:03:01 PM #29 Phase 133 File dlgbrnst.cpp, Line 1764
Writing short lead-out

8:03:37 PM #30 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was 689871 (A86CFh)Close track 1, ret: 0
Close Session/Border, function 2, track: 3, finalize disc: YES, ret: 0

8:03:37 PM #31 Phase 37 File dlgbrnst.cpp, Line 1764
Burn process completed successfully at 8x (11,080 KB/s)

8:03:37 PM #32 Phase 78 File dlgbrnst.cpp, Line 1764
Data verification started

8:03:40 PM #33 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400

8:03:58 PM #34 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 00 03 60 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05f55080: Len x8000

8:04:16 PM #35 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 00 03 C0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05f55080: Len x8000

8:04:16 PM #36 SectorVerify 20 File Cdrdrv.cpp, Line 11225
Read errors from sector 864 to 879
D:\civ4\CIVILIZA.MDF

8:04:33 PM #37 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 00 04 20 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05f55080: Len x8000

8:04:33 PM #38 SectorVerify 20 File Cdrdrv.cpp, Line 11225
Read errors from sector 960 to 975

8:10:39 PM #39 SectorVerify 20 File Cdrdrv.cpp, Line 11225
Read errors from sector 1056 to 1071

8:10:39 PM #40 Phase 81 File dlgbrnst.cpp, Line 1764
Data verification failed

8:10:39 PM #41 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:10:42 PM #42 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

8:10:42 PM #43 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======

#14

Try to look in the manual of the motherboard, there should be the type of bus you have.

#15

[QUOTE=Gummigutta;2049398]Try to look in the manual of the motherboard, there should be the type of bus you have.[/QUOTE]I still don’t know how chef knew it was the controller from my logs.

Anyway, yes the mobo has a JM368 ide controller chip. But what should I do about it. I’m still reading through all the posts about JMicron problems, but should I try the JMicron IDE drivers instead of the MS ones or something? I just don’t believe they’re making burners that won’t work on a lot of motherboards.

#16

Avoid putting a burner in such a connection. I think in most motherboard manuals it also states that they are not good for ATAPI devices. Buy a seperate add in card if you need more connections.

It’s more that they make motherboards that don’t work with burners.

#17

My motherboard manual says “…connects up to 2 IDE devices such as hard drives and optical drives…”. As I said my previous LiteOn drive worked fine. Then again it’s started to play up so maybe the controller has slowly killed it?? :slight_smile:

I’ve searched for others having similar problems with the same motherboard and it seems there’s not many. However conflicts between certain sata ports and the ide have been mentioned. So I’ll try swapping them round again.

All-in-all, this is my own fault. I thought it’d be easier to get an ide burner since my older comps don’t have sata. And yet I could’ve bought a sata burner online for half the price I paid locally. Big mistake.

#18

Can’t you edit your own posts here?

I solved the problem. It was a Daemon Tools conflict. I’ve just burnt 2 dvds without a hitch after uninstalling DT. I thought the conflicts were fixed several versions ago. And I expected at least one of you would’ve picked up from my logs I had it installed, if it could cause problems. :slight_smile: Thanks though guys for making me aware of the many controller issues that plague new systems.

Now, does anyone know if simply disabling all Daemon’s virtual drives is enough to prevent the conflicts? I really need virtual drives a bit at the moment and constantly installing/uninstalling DT would be a nightmare.

#19

Good you found the culprint…

Would have been my next q…DT, incd, etc. :wink:

#20

Yeah thanks chef. It’s all working fine now with the new version of DT. Someone at the ImgBurn forums mentioned there were apparent problems with the previous version and the change log shows some significant bug fixes.