Problems with nero, log report

Hello there.

I recently had some problems burning a backup of a movie, if anyone wants to help me here is the nero report log.

 Windows XP 5.1 
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmer\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02-11-2004 13:54:32 
 
NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0
 
Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS DVD-ROM LTD-166S>Version: DPS2 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
 
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On 
CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 0 DMA: On 
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On 
 
=== CDRom-Device-Map ===
JLMS DVD-ROM LTD-166S D: CDRom0
HP DVD Writer 200j E: CDRom1
=======================
 
AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 50MB (51960kB)
Memory in use : 90 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 
 
3.11.2006
Burn DVD Image
19:57:03	#1 Text 0 File SCSIPassThrough.cpp, Line 583
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
 
19:57:03	#2 Text 0 File Burncd.cpp, Line 3435
	Turn on Disc-At-Once, using DVD media
 
19:57:04	#3 Text 0 File DlgWaitCD.cpp, Line 301
	Last possible write address on media: 2295103 (510:01.28, 4482MB)
	Last address to be written: 2275549 (505:40.49, 4444MB)
 
19:57:04	#4 Text 0 File DlgWaitCD.cpp, Line 313
	Write in overburning mode: NO (enabled: CD)
 
19:57:04	#5 Text 0 File DlgWaitCD.cpp, Line 2863
	Recorder: HP DVD Writer 200j, Media type: DVD+R
 
19:57:04	#6 Text 0 File DlgWaitCD.cpp, Line 485
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
 
19:57:04	#7 Text 0 File ThreadedTransferInterface.cpp, Line 820
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
	 2 indices, index0 (150) not provided
	 original disc pos #0 + 2275550 (2275550) = #2275550/505:40.50
	 not relocatable, disc pos for caching/writing not required/not required, no patch infos
	 -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2275400 blocks [Main]
	--------------------------------------------------------------
 
19:57:04	#8 Text 0 File ThreadedTransferInterface.cpp, Line 1033
	Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1: Idx 0 Idx 1 Next Trk
	 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4660326400, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
	 0 | 1 | 0 | 0x41 | 2275550 | 2275400 | 0x00
	 0 | 1 | 1 | 0x41 | 2275550 | 2275400 | 0x00
	 2275550 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
 
19:57:04	#9 Text 0 File SCSIPassThrough.cpp, Line 41
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
 
19:57:04	#10 Phase 24 File dlgbrnst.cpp, Line 1746
	Caching of files started
 
19:57:04	#11 Text 0 File Burncd.cpp, Line 4262
	Cache writing successful.
 
19:57:04	#12 Phase 25 File dlgbrnst.cpp, Line 1746
	Caching of files completed
 
19:57:04	#13 Phase 36 File dlgbrnst.cpp, Line 1746
	Burn process started at 2.4x (3.324 KB/s)
 
19:57:04	#14 Text 0 File ThreadedTransferInterface.cpp, Line 2730
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
 
19:57:04	#15 SPTI -1066 File SCSIPassThrough.cpp, Line 293
	E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24 
	Buffer x05e4f600: Len x804
 
19:57:04	#16 SPTI -1066 File SCSIPassThrough.cpp, Line 293
	E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24 
 
19:57:04	#17 Text 0 File DVDR.cpp, Line 7051
	Drive: HP DVD Writer 200j 
	Book Type request [gen]: DVD-ROM, write to EEPROM
	Changing the Book Type was finished successfully, return code 0
 
19:57:04	#18 CDR -1211 File DVDR.cpp, Line 6123
	Book Type set to: DVD-ROM
 
19:57:04	#19 Text 0 File DVDPlusRW.cpp, Line 662
	Start write address at LBA 0
	DVD high compatibility mode: Yes
 
19:58:40	#20 SPTI -1 File SCSIPassThrough.cpp, Line 293
	E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
	Sense Key: 0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x91
	Sense Qual: 0xC2
	CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 04 00 00 00 00 0C 00 00 00 00 91 C2 
	Buffer x05e1da00: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
 
19:58:40	#21 CDR -1 File Writer.cpp, Line 278
	Unspecified Recorder Error
	E: HP DVD Writer 200j
 
19:58:40	#22 SPTI -1066 File SCSIPassThrough.cpp, Line 293
	E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24 
 
19:58:40	#23 Phase 127 File dlgbrnst.cpp, Line 1746
	Generating DVD high compatibility borders
 
19:58:40	#24 SPTI -1066 File SCSIPassThrough.cpp, Line 293
	E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24 
 
19:58:40	#25 Text 0 File DVDR.cpp, Line 7051
	Drive: HP DVD Writer 200j 
	Book Type request [gen]: DVD-ROM, write to EEPROM
	Changing the Book Type was finished successfully, return code 0
 
19:58:40	#26 CDR -1066 File WriterStatus.cpp, Line 161
	Invalid field in command
	E: HP DVD Writer 200j
 
19:58:40	#27 TRANSFER -24 File WriterStatus.cpp, Line 161
	Could not perform end of Disc-at-once
 
19:58:40	#28 Phase 38 File dlgbrnst.cpp, Line 1746
	Burn process failed at 2.4x (3.324 KB/s)
 
19:58:40	#29 Text 0 File Cdrdrv.cpp, Line 10459
	DriveLocker: UnLockVolume completed
 
19:58:40	#30 Text 0 File SCSIPassThrough.cpp, Line 583
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
 
 
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19-05-2006 22:16:24 
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 23-09-2006 14:32:02 
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16-05-2006 21:23:54 (Prassi/Veritas driver for win 2K)
 
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

Thanks for readin all that 'cause i sure dont understand a word of it.

The burner is at Secondary Slave - no good idea.
I would put it on Primary Slave.

Sense Key: 0x04 (KEY_HARDWARE_ERROR)

2.4x? Was this intentional, or was that the only speed offered?

What media are you using? If that was the only speed you were offered, and it’s a disc rated at a higher speed, it might be a case of firmware support.

Download CD-DVD Speed (or find it in the Nero Toolkit), put a blank disc in, then click the “Disc Info” tab. Post the MID info that it shows. :slight_smile:

Thanks, and welcome to CDF :slight_smile:

Thanks alot you two :smiley:

MID ? is that just the text? if so here it is

Nero CD-DVD Speed: Disc Info
Basic Information
Disc type: : DVD+R
Write speeds: : 2 X - 2.5 X
Blank Capacity : 4.38 GB
: 4482 MB
: 4700375040 bytes
Extended Information
Layers : n/a
Write strategies : n/a
Disc Status : Empty
Raw Data
0000 - 01 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 - …
0010 - 00 23 05 40 00 00 00 00 00 00 00 00 DA 88 D3 77 - .#.@…w
0020 - 97 72 40 77 9E 05 04 00 F0 FF FF FF 98 2C 18 00 - .r@w…,…
0030 - 04 09 11 00 5D 8E 40 77 04 00 00 00 FC 08 11 00 - …].@w

And how do you make it primary slave ? that’s in bios right ?

[I]Sorry for all my neewbie questions but i dont know much about hardware hehe[/I]

Hmmm, that’s really odd that it’s not showing the MID info in that text (usually there’s an entry that’ll say (for example) MID: TYG03).

Do you have Alcohol or Daemon Tools installed? If so, there might be an option in one of them called “Hide ATIP” or something.

Anyways…what brand are the discs, and what speed does it say on the discs/packaging? :slight_smile:

Edit: you don’t seem to have any virtual drives in your log, which you usually do if Alcohol or DT are installed…

(And don’t worry about asking “newbie” questions…if you don’t ask, you don’t learn ;))

Looks like a pretty old HP burner model which probably doesn’t handle currently available media. You’re very low on free memory as well, [B]cleansation[/B]. Try closing as many background apps as possible.

Hey people, thanks alot for all your answers :slight_smile:

For some weird reason it didnt help re install 1 or 2 times… But the third time it all suddendly worked… Thanks alot great site and great respons :bow:

Glad you got it sorted :clap: