Problems with nero, help plz!

vbimport

#1

Hi i have just recently expierienced problems with my Nero. It started when i tried to burn a video DVD and i recieved errors about hardware acceleration, but to fix this error i re-installed codes and drivers which were missing or wrong and uninstalled nero and re-installed it.
But i still get the error as the data is about to be burnt to the DVD/CD, it seems it will transcode the video data, or a similar process with a music CD but when it comes to actually burning the data onto the disc it ejects the disc and says: Unable to create disc structure, Burn process failed, An error log was created…ect.

and the error log look like this but i dont know where to start looking for the cause of the problem so i was thinkning one of u brainy people would be able to help, Thanks a lot! BTW i just used a 5 second video clip for this example of the error log so transcoding wouldn’t take too long.

[16:30:46] NeroVision Log created (Date: 01/22/2007)
[16:30:46] NeroVision Processors: 1 (Intel)
[16:30:46] NeroVision OS: Windows Windows XP
[16:30:47] GCCore     Detected DirectX Version: 9.0c
[16:30:47] GCHW       Node added: ACPI Fixed Feature Button
[16:30:47] GCHW       Node added: Intel Processor
[16:30:47] GCHW       Node added: Intel(R) 82802 Firmware Hub Device
[16:30:47] GCHW       Node added: Programmable interrupt controller
[16:30:47] GCHW       Node added: System timer
[16:30:47] GCHW       Node added: Direct memory access controller
[16:30:47] GCHW       Node added: Communications Port
[16:30:47] GCHW       Node added: Standard floppy disk controller
[16:30:47] GCHW       Node added: System speaker
[16:30:47] GCHW       Node added: Generic Bus
[16:30:47] GCHW       Node added: PCI bus
[16:30:47] GCHW       Node added: System CMOS/real time clock
[16:30:47] GCHW       Node added: System board
[16:30:47] GCHW       Node added: Motherboard resources
[16:30:47] GCHW       Node added: Numeric data processor
[16:30:47] GCHW       Node added: ACPI Power Button
[16:30:47] GCHW       Node added: Microsoft ACPI-Compliant System
[16:30:47] GCHW       Node added: Plug and Play Monitor
[16:30:47] GCHW       Node added: Plug and Play Monitor
[16:30:47] GCHW       Node added: Floppy disk drive
[16:30:47] GCHW       Node added: Microsoft UAA Function Driver for High Definition Audio - Realtek 880/860
[16:30:47] GCHW       Node added: Logitech USB First/Pilot Mouse+
[16:30:47] GCHW       Node added: HID Keyboard Device
[16:30:47] GCHW       Node added: HID-compliant consumer control device
[16:30:47] GCHW       Node added: HID-compliant device
[16:30:47] GCHW       Node added: 
[16:30:47] GCHW       Node added: CD-ROM Drive
[16:30:47] GCHW       Node added: Disk drive
[16:30:47] GCHW       Node added: ISAPNP Read Data Port
[16:30:47] GCHW       Node added: OHCI Compliant IEEE 1394 Host Controller
[16:30:47] GCHW       Node added: ADMtek AN983 based ethernet adapter
[16:30:47] GCHW       Node added: PCI Soft Data Fax Modem with SmartCP
[16:30:47] GCHW       Node added: Intel(R) 82801 PCI Bridge - 244E
[16:30:47] GCHW       Node added: Intel(R) 915G/P/GV Processor to I/O Controller - 2580
[16:30:47] GCHW       Node added: Intel(R) 82915G/GV/910GL Express Chipset Family
[16:30:47] GCHW       Node added: Intel(R) 82801FB LPC Interface Controller - 2640
[16:30:47] GCHW       Node added: Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM PCI Express Root Port - 2660
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM PCI Express Root Port - 2662
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM PCI Express Root Port - 2664
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM PCI Express Root Port - 2666
[16:30:47] GCHW       Node added: Microsoft UAA Bus Driver for High Definition Audio
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM SMBus Controller - 266A
[16:30:47] GCHW       Node added: Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
[16:30:47] GCHW       Node added: Primary IDE Channel
[16:30:47] GCHW       Node added: Secondary IDE Channel
[16:30:47] GCHW       Node added: Primary IDE Channel
[16:30:47] GCHW       Node added: Secondary IDE Channel
[16:30:47] GCHW       Node added: ACPI Uniprocessor PC
[16:30:47] GCHW       Node added: Volume Manager
[16:30:47] GCHW       Node added: AFD
[16:30:47] GCHW       Node added: 1394 ARP Client Protocol
[16:30:47] GCHW       Node added: Beep
[16:30:47] GCHW       Node added: dmboot
[16:30:47] GCHW       Node added: dmload
[16:30:47] GCHW       Node added: Fips
[16:30:47] GCHW       Node added: Generic Packet Classifier
[16:30:47] GCHW       Node added: HTTP
[16:30:47] GCHW       Node added: IP Network Address Translator
[16:30:47] GCHW       Node added: IPSEC driver
[16:30:47] GCHW       Node added: ksecdd
[16:30:47] GCHW       Node added: mnmdd
[16:30:47] GCHW       Node added: mountmgr
[16:30:47] GCHW       Node added: NAVENG
[16:30:47] GCHW       Node added: NAVEX15
[16:30:47] GCHW       Node added: NDIS System Driver
[16:30:47] GCHW       Node added: Remote Access NDIS TAPI Driver
[16:30:47] GCHW       Node added: NDIS Usermode I/O Protocol
[16:30:47] GCHW       Node added: NDProxy
[16:30:47] GCHW       Node added: NetBios over Tcpip
[16:30:47] GCHW       Node added: Null
[16:30:47] GCHW       Node added: PartMgr
[16:30:47] GCHW       Node added: ParVdm
[16:30:47] GCHW       Node added: PCIIde
[16:30:47] GCHW       Node added: Remote Access Auto Connection Driver
[16:30:47] GCHW       Node added: RDPCDD
[16:30:47] GCHW       Node added: SAVRT
[16:30:47] GCHW       Node added: SAVRTPEL
[16:30:47] GCHW       Node added: SPBBCDrv
[16:30:47] GCHW       Node added: SYMDNS
[16:30:47] GCHW       Node added: SymEvent
[16:30:47] GCHW       Node added: SYMFW
[16:30:47] GCHW       Node added: SYMIDS
[16:30:47] GCHW       Node added: SYMIDSCO
[16:30:47] GCHW       Node added: symlcbrd
[16:30:47] GCHW       Node added: SYMNDIS
[16:30:47] GCHW       Node added: SYMREDRV
[16:30:47] GCHW       Node added: SYMTDI
[16:30:47] GCHW       Node added: TCP/IP Protocol Driver
[16:30:47] GCHW       Node added: VgaSave
[16:30:47] GCHW       Node added: VolSnap
[16:30:47] GCHW       Node added: Remote Access IP ARP Driver
[16:30:47] GCHW       Node added: Audio Codecs
[16:30:47] GCHW       Node added: Legacy Audio Drivers
[16:30:47] GCHW       Node added: Media Control Devices
[16:30:47] GCHW       Node added: Legacy Video Capture Devices
[16:30:47] GCHW       Node added: Video Codecs
[16:30:47] GCHW       Node added: WAN Miniport (L2TP)
[16:30:47] GCHW       Node added: WAN Miniport (IP)
[16:30:47] GCHW       Node added: WAN Miniport (PPPOE)
[16:30:47] GCHW       Node added: WAN Miniport (PPTP)
[16:30:47] GCHW       Node added: Packet Scheduler Miniport
[16:30:47] GCHW       Node added: Packet Scheduler Miniport
[16:30:47] GCHW       Node added: Direct Parallel
[16:30:47] GCHW       Node added: Terminal Server Keyboard Driver
[16:30:47] GCHW       Node added: Terminal Server Mouse Driver
[16:30:47] GCHW       Node added: Plug and Play Software Device Enumerator
[16:30:47] GCHW       Node added: Microcode Update Device
[16:30:47] GCHW       Node added: Microsoft System Management BIOS Driver
[16:30:47] GCHW       Node added: Generic volume
[16:30:47] GCHW       Node added: Generic volume
[16:30:47] GCHW       Node added: Generic volume
[16:30:47] GCHW       Node added: Generic volume
[16:30:47] GCHW       Node added: Generic volume
[16:30:47] GCHW       Node added: Generic volume
[16:30:47] GCHW       Node added: Microsoft Kernel System Audio Device
[16:30:47] GCHW       Node added: Microsoft Kernel Wave Audio Mixer
[16:30:47] GCHW       Node added: Microsoft WINMM WDM Audio Compatibility Driver
[16:30:47] GCHW       Node added: USB Root Hub
[16:30:47] GCHW       Node added: USB Root Hub
[16:30:47] GCHW       Node added: USB Root Hub
[16:30:47] GCHW       Node added: USB Root Hub
[16:30:47] GCHW       Node added: USB Root Hub
[16:30:47] GCHW       Node added: Logitech USB First/Pilot Mouse+
[16:30:47] GCHW       Node added: USB Mass Storage Device
[16:30:47] GCHW       Node added: USB Composite Device
[16:30:47] GCHW       Node added: USB Human Interface Device
[16:30:47] GCHW       Node added: USB Human Interface Device
[16:30:47] GCHW       Node added: Disk drive
[16:30:47] GCHW       Node added: Disk drive
[16:30:47] GCHW       Node added: Disk drive
[16:30:47] GCHW       Node added: Disk drive
[16:30:47] GCHW       Node added: Disk drive
[16:30:47] GCHW       Node added: 1394 Net Adapter
[16:30:48] ExpressUI  Running NeroVision Express 3 SE Version: 3.1.0.0
[16:30:48] DVDEngine  Running DVDEngine version: 3.0.1.96
[16:30:48] DVDEngine  BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:30:48] DVDEngine  END: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:30:48] DVDEngine  BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[16:30:48] DVDEngine  END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[16:30:52] DVDEngine  BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:30:52] DVDEngine  END: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:30:52] DVDEngine  BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[16:30:52] DVDEngine  END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[16:30:52] MMTools    adding c:\Documents and Settings\R Beard\Desktop\New Folder\best\blackcheerleadersearch47_x3.mpeg video/0
[16:30:52] MMTools    --- used source filters ---
[16:30:52] MMTools    {E436EBB5-524F-11CE-9F53-0020AF0BA770} - File Source (Async.)
[16:30:52] MMTools    {336475D0-942A-11CE-A870-00AA002FEAB5} - MPEG-I Stream Splitter
[16:30:52] MMTools    {FEB50740-7BEF-11CE-9BD9-0000E202599C} - MPEG Video Codec
[16:30:52] MMTools    file type MPEG1 - video
[16:30:52] MMTools    --------------------
[16:30:55] DVDEngine  BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:30:55] DVDEngine  END: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:30:55] DVDEngine  BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[16:30:55] DVDEngine  END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[16:30:57] MMTools    adding c:\Documents and Settings\R Beard\Desktop\New Folder\best\blackcheerleadersearch47_x3.mpeg audio/0
[16:30:57] MMTools    --- used source filters ---
[16:30:57] MMTools    {E436EBB5-524F-11CE-9F53-0020AF0BA770} - File Source (Async.)
[16:30:57] MMTools    {336475D0-942A-11CE-A870-00AA002FEAB5} - MPEG-I Stream Splitter
[16:30:57] MMTools    {138130AF-A79B-45D5-B4AA-87697457BA87} - Nero Digital Audio Decoder
[16:30:57] MMTools    file type MPEG1 - audio
[16:30:57] MMTools    --------------------
[16:30:57] MMTools    adding cached c:\Documents and Settings\R Beard\Desktop\New Folder\best\blackcheerleadersearch47_x3.mpeg video/0
[16:31:08] GCCore     The following operation did not finish in the past 15 seconds: Grab still image (AVStillSource)
[16:31:10] ExpressUI  Burn process started by user.
[16:31:10] ExpressUI  Destination: _NEC     DVD_RW ND-3530A 
[16:31:10] ExpressUI  Directory for temporary files: C:\DOCUME~1\RBEARD~1\LOCALS~1\Temp
[16:31:10] ExpressUI  ------<NeroVision Project Information>--------
[16:31:10] ExpressUI  --- Project type: DVD-Video
[16:31:10] ExpressUI  --- Project video options ---
[16:31:10] ExpressUI  Video mode: PAL
[16:31:10] ExpressUI  Aspect ratio: Automatic
[16:31:10] ExpressUI  Quality: Automatic
[16:31:10] ExpressUI  Resolution: Automatic
[16:31:10] ExpressUI  Sample format: Automatic
[16:31:10] ExpressUI  File type: MPEG-2
[16:31:10] ExpressUI  Audio format: Stereo
[16:31:10] ExpressUI  Encoding mode: Fast Encoding (1-Pass)
[16:31:10] ExpressUI  --- Project space information ---
[16:31:10] ExpressUI  Used disc space: 0.01 GB
[16:31:10] ExpressUI  --- Project contents ---
[16:31:10] ExpressUI  Sample format: Automatic
[16:31:10] ExpressUI  Audio format: Stereo
[16:31:10] ExpressUI  Encoding mode: Fast Encoding (1-Pass)
[16:31:10] ExpressUI  Number of titles: 1
[16:31:10] ExpressUI  1. blackcheerleadersearch47_x3 (Video Title, 0h 00m 20s)
[16:31:10] ExpressUI  Video mode: PAL
[16:31:10] ExpressUI  Aspect ratio: 4:3
[16:31:10] ExpressUI  Quality: Standard play (5073 kbps)
[16:31:10] ExpressUI  Resolution: 704 x 576 (D1)
[16:31:10] ExpressUI  Audio SmartEncoding ratio: 0.0 %
[16:31:10] ExpressUI  Video SmartEncoding ratio: 0.0 %
[16:31:10] ExpressUI  --------<End of Project Information>----------
[16:31:10] DVDEngine  BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:31:10] DVDEngine  END: IDVDEngineManagerImpl - CreateDVDVideoSession
[16:31:10] DVDEngine  BEGIN: IDVDSessionBaseImpl - RegisterCallback
[16:31:10] DVDEngine  ..Session callback registered...
[16:31:10] DVDEngine  END: IDVDSessionBaseImpl - RegisterCallback
[16:31:10] DVDEngine  BEGIN: IDVDSessionBaseImpl - RegisterApplicationService
[16:31:10] DVDEngine  ..Application service registered...
[16:31:10] DVDEngine  END: IDVDSessionBaseImpl - RegisterApplicationService
[16:31:10] DVDEngine  BEGIN: IDVDSessionBaseImpl - BeginDiscAccess
[16:31:10] DVDEngine  ..Access mode=read/write
[16:31:10] DVDEngine  ..Flags=0
[16:31:10] DVDEngine  ..Write speed=3324 KB/s (2.4x)
[16:31:10] DVDEngine  ..Medium type=DVD-R
[16:31:10] DVDEngine  DVD format is 1
[16:31:10] DVDEngine  Supported Access Modes: 0x00000001
[16:31:10] DVDEngine  **BEGIN: IDVDSessionBaseImpl - Update HCB state
[16:31:10] DVDEngine  **END: IDVDSessionBaseImpl - Update HCB state
[16:31:10] DVDEngine  END: IDVDSessionBaseImpl - BeginDiscAccess
[16:31:10] DVDEngine  BEGIN: IDVDVideoSessionImpl - Prepare
[16:31:10] DVDEngine  ..BAO activated
[16:31:10] DVDEngine  **BEGIN: _DVDVideo - Prepare
[16:31:10] DVDEngine  ..VTS_Ns=1...
[16:31:10] DVDEngine  ****BEGIN: _DVDVideoBase - Prepare VMG
[16:31:10] DVDEngine  ...VMGM_VOBS_exist = false
[16:31:10] DVDEngine  ****END: _DVDVideoBase - Prepare VMG
[16:31:10] DVDEngine  ****BEGIN: _DVDVideoBase - Prepare VTS#1
[16:31:10] DVDEngine  ...VTSM_VOBS_exist = false
[16:31:10] DVDEngine  ******BEGIN: VTSTT_VOBS#1 - Process Create
[16:31:10] DVDEngine  ********BEGIN: _VOBS - Process VOB
[16:31:10] NeroVision Analyze video stream
[16:31:10] NeroVision  Seg. |  frames | weight | volume
[16:31:10] NeroVision ------+---------+--------+--------
[16:31:10] NeroVision    0  |     515 |      1 | 515
[16:31:10] NeroVision ------+---------+--------+--------
[16:31:10] NeroVision total : 515 
[16:31:10] DVDEngine  **********BEGIN: _VOBS - _M_analyze_cnv_input
[16:31:10] DVDEngine  ...Duration 206000000 
[16:31:10] DVDEngine  ..._streamtime_frame_duration is 400000 
[16:31:10] DVDEngine  ...Stream 0 is 'Video'
[16:31:10] DVDEngine  ...Stream 1 is 'Audio'
[16:31:10] DVDEngine  **********END: _VOBS - _M_analyze_cnv_input
[16:31:10] NeroVision Estimate Size
[16:31:10] NeroVision +-------+------+--------+----------+--------- 
[16:31:10] NeroVision |Stream | Seg. | UnComp.| Duration | Size (KB)
[16:31:10] NeroVision +-------+------+--------+----------+--------- 
[16:31:10] NeroVision |  0    |  0   |      1 |    20.60 |    12981
[16:31:10] NeroVision |  1    |  0   |      1 |    20.60 |      577
[16:31:10] NeroVision +-------+------+--------+----------+--------- 
[16:31:10] NeroVision total data size  : 14112369 bytes 
[16:31:10] NeroVision multiplexed size : 14577664 bytes 
[16:31:10] MMTools    adding cached c:\Documents and Settings\R Beard\Desktop\New Folder\best\blackcheerleadersearch47_x3.mpeg video/0
[16:31:11] MMTools    adding cached c:\Documents and Settings\R Beard\Desktop\New Folder\best\blackcheerleadersearch47_x3.mpeg audio/0
[16:31:12] DVDEngine  ********END: _VOBS - Process VOB
[16:31:12] DVDEngine  ******END: VTSTT_VOBS#1 - Process Create
[16:31:12] DVDEngine  ****END: _DVDVideoBase - Prepare VTS#1
[16:31:12] DVDEngine  **END: _DVDVideo - Prepare
[16:31:12] DVDEngine  ..Estimated size (overall)=13.9 MB
[16:31:12] DVDEngine  ..Estimated duration (overall)=20 sec
[16:31:12] DVDEngine  END: IDVDVideoSessionImpl - Prepare
[16:31:12] DVDEngine  BEGIN: IDVDSessionBaseImpl - GetDiscCaps
[16:31:12] DVDEngine  ..Caps=DSCCAP_VLMNM_UDF | DSCCAP_VLMNM_ISO9660
[16:31:12] DVDEngine  END: IDVDSessionBaseImpl - GetDiscCaps
[16:31:12] DVDEngine  BEGIN: IDVDSessionBaseImpl - SetLabel
[16:31:12] DVDEngine  Volume name (ISO9660) = "DVD"
[16:31:12] DVDEngine  END: IDVDSessionBaseImpl - SetLabel
[16:31:12] DVDEngine  BEGIN: IDVDSessionBaseImpl - SetLabel
[16:31:12] DVDEngine  Volume name (UDF) = "DVD"
[16:31:12] DVDEngine  END: IDVDSessionBaseImpl - SetLabel
[16:31:12] DVDEngine  BEGIN: IDVDVideoSessionImpl - GetDiscContent
[16:31:12] DVDEngine  **BEGIN: _DVDVideo - Fill FileSystemDescContainer
[16:31:12] DVDEngine  ..File: 'VIDEO_TS\VIDEO_TS.IFO' (VMGI), location={undefined}, size=8.00 KB (8,192 bytes)
[16:31:12] DVDEngine  ..File: 'VIDEO_TS\VIDEO_TS.BUP' (VMGI), location={undefined}, size=8.00 KB (8,192 bytes)
[16:31:12] DVDEngine  ..File: 'VIDEO_TS\VTS_01_0.IFO' (VTSI), location={undefined}, size=14.0 KB (14,336 bytes)
[16:31:12] DVDEngine  ..File: 'VIDEO_TS\VTS_01_1.VOB' (VTSTT_VOBS), location={undefined}, size=13.9 MB (14,581,760 bytes)
[16:31:12] DVDEngine  ..File: 'VIDEO_TS\VTS_01_0.BUP' (VTSI), location={undefined}, size=14.0 KB (14,336 bytes)
[16:31:12] DVDEngine  **END: _DVDVideo - Fill FileSystemDescContainer
[16:31:12] DVDEngine  END: IDVDVideoSessionImpl - GetDiscContent
[16:31:12] NeroAPI    Burn process started at 2.4x (3,324 KB/s)
[16:31:12] DVDEngine  BEGIN: IDVDVideoSessionImpl - CreateDisc
[16:31:12] DVDEngine  **BEGIN: _DVDVideo - Create
[16:31:12] DVDEngine  ****BEGIN: Create - VTSTT_VOBS#1
[16:31:12] NeroAPI    Writing file to disc failed
[16:31:12] DVDEngine  _BAOContext::OpenFile(): NeroBAOOpenFile() returned 3
[16:31:12] DVDEngine  1A20-030E-0300-2274-3112-5835
[16:31:12] DVDEngine  Windows XP 5.1
[16:31:12] DVDEngine  IA32
[16:31:12] DVDEngine  WinAspi: -
[16:31:12] DVDEngine  ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32 
[16:31:12] DVDEngine  Nero API version: 6.6.0.8
[16:31:12] DVDEngine  Using interface version: 6.6.0.4
[16:31:12] DVDEngine  Installed in: C:\Program Files\Ahead\Nero\
[16:31:12] DVDEngine  Application: ahead\NeroVision
[16:31:12] DVDEngine  Recorder:             <_NEC DVD_RW ND-3530A>    Version: 1.80 - HA 0 TA 1 - 6.6.0.8
[16:31:12] DVDEngine   Adapter driver:      <atapi>                   HA 0
[16:31:12] DVDEngine   Drive buffer  :      2048kB
[16:31:12] DVDEngine   Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
[16:31:12] DVDEngine  === Scsi-Device-Map ===
[16:31:12] DVDEngine  DiskPeripheral       : ST3200021A                       atapi Port 0 ID 0  DMA: On 
[16:31:12] DVDEngine  CdRomPeripheral      : _NEC DVD_RW ND-3530A             atapi Port 0 ID 1  DMA: On 
[16:31:12] DVDEngine  === CDRom-Device-Map ===
[16:31:12] DVDEngine  _NEC DVD_RW ND-3530A       D:   CDRom0
[16:31:12] DVDEngine  =======================
[16:31:12] DVDEngine  AutoRun : 1
[16:31:12] DVDEngine  Excluded drive IDs: 
[16:31:12] DVDEngine  WriteBufferSize: 73400320 (0) Byte
[16:31:12] DVDEngine  ShowDrvBufStat : 0
[16:31:12] DVDEngine  BUFE           : 0
[16:31:12] DVDEngine  Physical memory     : 502MB (514544kB)
[16:31:12] DVDEngine  Free physical memory: 130MB (133888kB)
[16:31:12] DVDEngine  Memory in use       : 73 %
[16:31:12] DVDEngine  Uncached PFiles: 0x0
[16:31:12] DVDEngine  Use Inquiry    : 1
[16:31:12] DVDEngine  Global Bus Type: default (0)
[16:31:12] DVDEngine  Check supported media : Disabled (0) 
[16:31:12] DVDEngine  22.1.2007
[16:31:12] DVDEngine  NeroAPI
[16:31:12] DVDEngine  16:31:12	#1 Text 0 File DlgWaitCD.cpp, Line 260
[16:31:12] DVDEngine  	Last possible write address on media:  2298495 (510:46.45, 4489MB)
[16:31:12] DVDEngine  	Last address to be written:                 -1 (  0:00.-1,    0MB)
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#2 Text 0 File DlgWaitCD.cpp, Line 272
[16:31:12] DVDEngine  	Write in overburning mode: NO (enabled: CD)
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#3 Text 0 File DlgWaitCD.cpp, Line 2339
[16:31:12] DVDEngine  	Recorder: _NEC DVD_RW ND-3530A, Media type: DVD-R
[16:31:12] DVDEngine  	 Disc Manufacturer: RITEKF - 1
[16:31:12] DVDEngine  	 Disc Application Code: 64, Disc Physical Code: 193
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#4 Text 0 File DlgWaitCD.cpp, Line 438
[16:31:12] DVDEngine  	>>> Protocol of DlgWaitCD activities: <<<
[16:31:12] DVDEngine  	=========================================
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#5 Text 0 File DVDR.cpp, Line 6002
[16:31:12] DVDEngine  	Book Type counter: 500, Book Type selected in EEPROM, command version 2
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#6 Text 0 File DVDR.cpp, Line 6002
[16:31:12] DVDEngine  	Book Type counter: 500, Book Type selected in EEPROM, command version 2
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#7 Text 0 File DVDR.cpp, Line 2258
[16:31:12] DVDEngine  	Recording mode: Sequential Recording Mode for Multisession
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#8 Text 0 File Mmc.cpp, Line 21353
[16:31:12] DVDEngine  	Set BUFE: Buffer underrun protection -> ON 
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#9 Text 0 File DVDR.cpp, Line 2404
[16:31:12] DVDEngine  	Start write address at LBA 0
[16:31:12] DVDEngine  	DVD high compatibility mode: No
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#10 Text 0 File Cdrdrv.cpp, Line 8430
[16:31:12] DVDEngine  	---- DVD Structure: Physical Format Information (00h) ----
[16:31:12] DVDEngine  	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
[16:31:12] DVDEngine  	 Book Type: DVD-R   (2), Part Version: 5
[16:31:12] DVDEngine  	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
[16:31:12] DVDEngine  	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
[16:31:12] DVDEngine  	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
[16:31:12] DVDEngine  	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
[16:31:12] DVDEngine  	 End Physical Sector Number of Data Area:      26127F h
[16:31:12] DVDEngine  	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
[16:31:12] DVDEngine  	 Data in Burst Cutting Area (BCA) does not exist
[16:31:12] DVDEngine  	  Start sector number of the current Border-Out: 2FE10 h
[16:31:12] DVDEngine  	  Start sector number of the next Border-In:     2FFA0 h
[16:31:12] DVDEngine  	 Media Specific [16..63]:
[16:31:12] DVDEngine  	      00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
[16:31:12] DVDEngine  	      00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
[16:31:12] DVDEngine  	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#11 Text 0 File DVDR.cpp, Line 6002
[16:31:12] DVDEngine  	Book Type counter: 500, Book Type selected in EEPROM, command version 2
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#12 Text 0 File DVDR.cpp, Line 6002
[16:31:12] DVDEngine  	Book Type counter: 500, Book Type selected in EEPROM, command version 2
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#13 Text 0 File DVDR.cpp, Line 6002
[16:31:12] DVDEngine  	Book Type counter: 500, Book Type selected in EEPROM, command version 2
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#14 Text 0 File DVDR.cpp, Line 5118
[16:31:12] DVDEngine  	Drive: _NEC     DVD_RW ND-3530A 
[16:31:12] DVDEngine  	Book Type request [NEC]: Physical disc type
[16:31:12] DVDEngine  	Book Type setting not supported for the loaded disc type
[16:31:12] DVDEngine  	Changing the Book Type was finished with error, return code -4
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#15 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
[16:31:12] DVDEngine  	Estimated filesystem size: 544
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#16 Phase 36 File APIProgress.cpp, Line 276
[16:31:12] DVDEngine  	Burn process started at 2.4x (3,324 KB/s)
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#17 SCSI -1046 File Cdrdrv.cpp, Line 1181
[16:31:12] DVDEngine  	SCSI Exec, HA 0, TA 1, LUN 0
[16:31:12] DVDEngine  	Status:     0x04 (0x01, SCSI_ERR)
[16:31:12] DVDEngine  	HA-Status   0x00 (0x00, OK)
[16:31:12] DVDEngine  	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
[16:31:12] DVDEngine  	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
[16:31:12] DVDEngine  	Sense Code: 0x30
[16:31:12] DVDEngine  	Sense Qual: 0x05
[16:31:12] DVDEngine  	CDB Data:   0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x40 0x00 0x00 0x00 
[16:31:12] DVDEngine  	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 
[16:31:12] DVDEngine  	            0x00 0x00 0x00 0x00 0x30 0x05 
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#18 Text 0 File BurnAtOnceRecorder.cpp, Line 679
[16:31:12] DVDEngine  	Error reserving fragment (0)
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#19 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
[16:31:12] DVDEngine  	Disc info:
[16:31:12] DVDEngine  	Partitions: 0
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#20 Text 0 File BurnAtOnceRecorder.cpp, Line 1859
[16:31:12] DVDEngine  	Error reserving start segment
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#21 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
[16:31:12] DVDEngine  	Disc info:
[16:31:12] DVDEngine  	Partitions: 0
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  16:31:12	#22 Phase 179 File APIProgress.cpp, Line 276
[16:31:12] DVDEngine  	Writing file to disc failed
[16:31:12] DVDEngine  	
[16:31:12] DVDEngine  Existing drivers:
[16:31:12] DVDEngine  File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 21:16:24 
[16:31:12] DVDEngine  File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 20:23:54 (Prassi/Veritas driver for win 2K)
[16:31:12] DVDEngine  Registry Keys:
[16:31:12] DVDEngine  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 
[16:31:12] DVDEngine  _Xcept (): Signalling Exception: 129 NeroBAOOpenFile() returned error condition _BAOContext::OpenFile()
[16:31:12] DVDEngine  ****END: Create - VTSTT_VOBS#1
[16:31:12] DVDEngine  **END: _DVDVideo - Create
[16:31:12] DVDEngine  ########################################################################################
[16:31:12] DVDEngine  ERROR
[16:31:12] DVDEngine  cause: 129 (neroapi_call_failed)
[16:31:12] DVDEngine  source: NeroBAOOpenFile() returned error condition
[16:31:12] DVDEngine  description: _BAOContext::OpenFile()
[16:31:12] DVDEngine  ########################################################################################
[16:31:12] DVDEngine  **BEGIN: IDVDSessionBaseImpl - Clear
[16:31:12] DVDEngine  **END: IDVDSessionBaseImpl - Clear
[16:31:12] DVDEngine  END: IDVDVideoSessionImpl - CreateDisc
[16:31:15] NeroAPI    Burn process failed at 2.4x (3,324 KB/s)
[16:31:15] DVDEngine  BEGIN: IDVDSessionBaseImpl - EndDiscAccess
[16:31:15] DVDEngine  ..Flags=0
[16:31:15] DVDEngine  **BEGIN: _MediaAccess::Release ()
[16:31:15] DVDEngine  ****BEGIN: _MediaAccess::~_MediaAccess ()
[16:31:15] DVDEngine  ****END: _MediaAccess::~_MediaAccess ()
[16:31:15] DVDEngine  **END: _MediaAccess::Release ()
[16:31:15] DVDEngine  END: IDVDSessionBaseImpl - EndDiscAccess
[16:31:15] DVDEngine  BEGIN: IDVDSessionBaseImpl - RegisterCallback
[16:31:15] DVDEngine  ..Session callback unregistered...
[16:31:15] DVDEngine  END: IDVDSessionBaseImpl - RegisterCallback

#2

Welcome to CD Freaks.

I have various suggestions for you.

First update Nero to 6.6.0.18 , 6.6.1.4 or 6.6.16 as the version you have gets confused & tries to set the booktype of a DVD-R disk & errors. You’ll see that in the log.

Secondly update the firmware from version 1.80 to 3.01 from here as the burner does not recognise the Ritek F1 media so offers the 2.4x burn speed.

Thirdly use better quality disks like Verbatim.

And finally never burn directly from NVision as any conversion failure can result in a wasted disk.

That should keep you busy for a while.


#3

hi, thanks 4 the welcome.
I’m a bit confused on how to upgrade my firmwire. I have downloaded it and it unzippes with a weblink, readme file and the BIN file which i am not sure with what programme to open this with. If you could help that would be great.
I have tried updating nero, the problem persists but this firmwire could possible be the problem.

Anymore suggestions people?
Cheers, Rob!


#4

Read the tutorial on flashing on the page I gave you. It’s bottom left. Better reading that than me guiding you I think.

In Nero you have the option to set what it does with BookTyping. In Burning Rom it’s Recorder-> Choose Recorder & then options at the bottom of the screen once you’ve selected the burner. It might need a disc in before you start this.
Hopefully it’ll say Automatic or Current Recorder Setting.

You won’t get anywhere with burning until the firmware has been updated & don’t forget to reboot after the upgrade.


#5

Tim you are fantastic mate, all sorted now it was the firmwire update once updated started working perfectly again. If it wasn’t for people in the know like yourself, people like me would be fcuked thats for sure.
Cheers bro, Rob


#6

Glad to see a happy member and thanks to you TimC that made him/her that.


#7

Rob.

Glad it’s now all OK. And btw it’s [B]firmware[/B] not firmwire.

@TCAS

I suppose that’s one way of increasing your post count & getting guru status. :bigsmile: