Problems With .iso

gachadwi 2008-06-08 04:06:03 UTC #1

Hello, I have been using DVDFab to turn convert my dvds into .iso then have been using Nero 7 to burn them onto dvd. This has worked for me for a very long time now. I recently began getting an error that without fail will occur at 88 89% completion. The dvd drive with speed up very fast at this percent will stop buffering and then complete the process early. Here is the log that I got after the error occured. Any help would be appreciated.
-Thanks

Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <Optiarc DVD+-RW AD-5560A>Version: DD11 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Optiarc DVD+-RW AD-5560A>Version: DD11 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHW2120BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Optiarc DVD+-RW AD-5560A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MK3521E OEV309R 1.01 a44e0wsk Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
Optiarc DVD+-RW AD-5560A E: CDRom0
MK3521E OEV309R G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046904kB)
Free physical memory: 491MB (502980kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.6.2008
Burn DVD Image
8:08:02 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

8:08:03 PM #2 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media

8:08:03 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202075 (489:21.00, 4300MB)

8:08:03 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

8:08:03 PM #5 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: Optiarc DVD+-RW AD-5560A, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

8:08:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:08:03 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2202076 (2202076) = #2202076/489:21.1
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202076 blocks [E: Optiarc DVD+-RW AD-5560A]

8:08:03 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: Optiarc DVD+-RW AD-5560A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509851648, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|____Size|_____NWA|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2202076 | 2202076 | 0x00
2202076 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

8:08:03 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:08:03 PM #10 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

8:08:03 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

8:08:03 PM #12 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

8:08:03 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

8:08:03 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)

8:08:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

8:08:05 PM #16 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

8:08:05 PM #17 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x061a4100: Len x648

8:08:05 PM #18 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

8:08:05 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

8:20:15 PM #20 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1D 65 20 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x07742200: Len x10000
0x00 00 01 BA 44 9B 14 CD FC C5 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 30 32 FC 96 90 38 F7 74 D3
0x4B C1 94 00 64 E3 D0 00 30 00 16 C0 7F 0C AE AF

8:20:15 PM #21 CDR -1135 File Writer.cpp, Line 303
Write error
E: Optiarc DVD+-RW AD-5560A

8:21:06 PM #22 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 1926432

8:21:09 PM #23 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)

8:21:10 PM #24 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

8:21:13 PM #25 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

8:21:13 PM #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

geno888 2008-06-08 06:54:54 UTC #2

Welcome to the forum

From the log I can see that you are using low quality discs. This is a very frequent cause of burning failures.

Try again with a proven quality disc and see if this solve. I suggest a Verbatim (very easy to find) or a Taiyo Yuden.

gachadwi 2008-06-08 13:42:24 UTC #3

Yes, I actually I had considered the discs as the problem as they were given to me free from a friend, but since I had updated to windows xp service pack 3 at the same time I ran out of my other set of discs it makes me a little more worried about the hardware, or software going bad or at least becoming incompatible. Will have to get some new discs tonight. Thanks for the reply

gachadwi 2008-06-09 20:49:32 UTC #4

No luck with changing discs. Ran to walmart tonight and picked up some Sony DVD R discs. Here is the newest log, anyone able to see what is wrong? Still able to rip a dvd into an .iso and the .iso will run on daemon tools. Not sure if windows xp service pack 3 could have messed anything up to make me have this error.

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0

Recorder: <Optiarc DVD±RW AD-5560A>Version: DD11 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Optiarc DVD±RW AD-5560A>Version: DD11 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHW2120BH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Optiarc DVD±RW AD-5560A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MK3521E OEV309R 1.01 avld758z Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
Optiarc DVD±RW AD-5560A E: CDRom0
MK3521E OEV309R G: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046904kB)
Free physical memory: 479MB (491388kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.6.2008
Burn DVD Image
10:26:20 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:26:20 PM #2 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media

10:26:20 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202264 (489:23.39, 4301MB)

10:26:20 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

10:26:20 PM #5 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: Optiarc DVD±RW AD-5560A, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

10:26:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:26:20 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2202265 (2202265) = #2202265/489:23.40
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202265 blocks [E: Optiarc DVD±RW AD-5560A]
--------------------------------------------------------------

10:26:20 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: Optiarc DVD±RW AD-5560A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510238720, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2202265 | 2202265 | 0x00
2202265 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:26:20 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:26:20 PM #10 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

10:26:20 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

10:26:20 PM #12 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

10:26:20 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

10:26:20 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)

10:26:22 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:26:22 PM #16 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY…
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 …SONY…D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7…(n…i…
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 …

10:26:23 PM #17 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x062a4c40: Len x648

10:26:23 PM #18 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

10:26:23 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

10:39:49 PM #20 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 21 3E A0 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x08495800: Len x10000
0x00 00 01 BA 44 08 B5 33 E4 8D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 49 0D 19 18 00 50 EB 01 E2
0xA4 0D 21 00 ED 0B 0D F8 AD C9 3F 04 96 4E DE 2B

10:39:49 PM #21 CDR -1135 File Writer.cpp, Line 303
Write error
E: Optiarc DVD±RW AD-5560A

10:40:43 PM #22 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 2178720

10:40:43 PM #23 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)

10:40:43 PM #24 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:40:45 PM #25 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

10:40:45 PM #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

geno888 2008-06-10 10:39:18 UTC #5

Too bad also Sony discs are not the very best

Another possibility is that Daemon Tools is interfering with the burning process in some way. Try to disable it when you burn and see if this solve

To exclude a damaged drive, another test you can do is install the drive in a different computer. If it still gives the same problem, then probably the drive is “gone”

gachadwi 2008-06-10 17:53:51 UTC #6

Well I have disabled my daemon tools, and unfortunately could not buy a small stack of anything but Memorex from best buy, so still with the cheap cds. The good news is that I had a succesful burn, now to to see if i can repeat the process with the new discs. After that I guess I should try the old discs again with Daemon tools disabled. Thanks Again for the help. You actually suggested the same thing as the Dell techs that remotely logged onto my system last night. So good job

olyteddy 2008-06-10 18:56:16 UTC #7

You might also consider trying ImgBurn instaed of Nero. ImgBurn is strictly for burning disks and doesn’t have the ‘bloat’ of your typical Nero installation.

geno888 2008-06-11 13:40:55 UTC #8

Too bad Memorex is even worst than Sony discs