I’m not sure if this has been covered or not but is anyone else having problems copying cds and non-encrypted dvds on the FLY using NERO…?
Best to copy to HDD first lot less trouble
i make alway on the fly burns with my tosh1712(nospeedhack) and the nec3500.
urnspeed is 12x on dvd without probs.
Put the optical drives on separate IDE channels for best results.
the best way to do ON THE FLY copying is to make sure your READ SPEED is DOUBLE of the BURN SPEED…example: dvdrom is your source make the READ SPEED 16X and your dvd burner speed 8x…
i have my dvdroms and dvd burners on the same ide controller…on occasion when i am lazy i will do ON THE FLY copying which i have no problems in burning or playback issues.
PLEXTOR 708A DVDRW
PIONEER 107D DVDRW
LITEON 811 DVDRW
BENQ 1620 DVDRW (2)
TOSHIBA (2)1612 DVD-ROM
PLEXTOR 48X24X48 CDRW
PENT 4 HT 3.00C, 800 FSB, PENT 4 2.40 533 FSB
ASUS MOBO’s P4P800SE (2)
1GB CRUCIAL PC3200 MEMORY, 1GB CRUCIAL PC2700
WESTERN DIGITAL 36GB RAPTOR HARD DRIVE
MAXTOR 200 GB HARD DRIVE
MAXTOR (2)250 GB HARD DRIVEs
MAXTOR 200 GB SATA HARD DRIVE
MAXTOR (2)120 GB HARD DRIVEs
MAXTOR 60 GB HARD DRIVE
ANTEC TRUE POWER 480 WATT POWER SUPPLY
ANTEC TRUE POWER 430 WATT POWER SUPPLY
ANTEC SLK2650 CASE, ANTEC SLK2600AMB CASE
CANOPUS ADVC-100 ANALOG TO DIGITAL CONVERTER
MAXTOR ATA -133 PCI CONTROLLER CARDS
i used to be able to do it with my old nec 2500a dvd burner…although it was slow, but it did work, my dvd-rom is 16x and rips like a champ… i dont know what happened, the only thing i changed was my ide cable from 40wire to an 80wire, (brand new) and my plextor 716… hmmmm- ya on nero it wont even let me try to do it
here’s a pic,
and its an UN-Encrypted dvd and i tried at 4x
What version of nero are you using,I always do otf burns but when I upgraded to nero
18.104.22.168 I got the same error
ya, 22.214.171.124, what version do you have to get it workin again
TBH any other version of nero is ok,I’m using 126.96.36.199 at the moment
using 188.8.131.52 and have copied DVDs on the fly…not cds yet. 2 x 716A prim & sec masters each.
ah, the older versions worked!
Drpino u must just be lucky
Did you get 16x?
I got 8.9x max with both drive (716/1620) shared the same IDE. Too lazy to move my drives around.
nope, buffer underrun comes into play because DVD+Rs are limited to max 12X read speed. avg is like 10X but burn time is usually around 7:30-8:30
i don’t mind the extra time though…