Problems burning dual layer, Help!

vbimport

#1

For a long time not bothered to try to burn dual layer DVD’s on my NEC ND-3500 AD. I’m using Nero 7 ultra edition, and when I tried to burn dual layer today I had several DAO errors to begin with, but these errors I (presumably) managed to sort out, using tips I found on this forum. The burn with which I had problems stared out fine, but when the burn tried to continue on layer 2 I got an error which resulted in the following error report. What to do, what to do?

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.1B - HA 1 TA 4 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B H: CDRom0
HL-DT-ST CD-RW GCE-8520B I: CDRom1
_NEC DVD_RW ND-3500AG J: CDRom4

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 168MB (172692kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.3.2007
ISO compilation
21:00:32 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

21:00:33 #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

21:00:33 #3 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

21:00:33 #4 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media

21:01:08 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3885295 (863:23.70, 7588MB)

21:01:08 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

21:01:08 #7 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R9 Double Layer

21:01:08 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD+R DL.)

21:01:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3885296 (3885296) = #3885296/863:23.71
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3885296 blocks [J: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

21:01:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [J: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7957086208, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 3885296 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3885296 | 0 | 0x00
3885296 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

21:01:08 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

21:01:08 #12 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

21:01:08 #13 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

21:01:08 #14 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

21:01:08 #15 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 2.4x (3Â 324 KB/s)

21:01:08 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:01:08 #17 Text 0 File DVDPlusDualLayer.cpp, Line 475
Disc finalized, LBA total Image size: 3885296 (7588MB), Last LBA L0: 1942655 (3794MB)

21:01:50 #18 Text 0 File DVDPlusDualLayer.cpp, Line 640
L0 Data Zone Capacity set to 1942656 (1DA480h, 3794MB) -> OK, confirmed setting

21:01:50 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 667
Burning Layer 1

21:01:50 #20 Text 0 File DVDPlusDualLayer.cpp, Line 677
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

21:01:50 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x085e5040: Len x804

21:01:50 #22 Text 0 File DVDR.cpp, Line 6518
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

21:01:50 #23 CDR -1207 File DVDR.cpp, Line 6212
Book Type automatically set to: DVD-ROM

21:01:50 #24 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

21:21:28 #25 CDR -1206 File DVDPlusDualLayer.cpp, Line 1950
Burning Layer 2

21:21:28 #26 Text 0 File DVDPlusDualLayer.cpp, Line 1961
Perform layer 1 to 2 jump before writing at address 1942656 (1DA480h)

21:21:46 #27 SPTI -1093 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1D B9 60 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02
Buffer x0bc1c180: Len x10000
0x00 00 01 BA 44 0D 1E 22 FE 57 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 05 04 BF 34 7B 0C 00 19 C2
0x8B 73 8E 5A 10 A1 C0 88 00 80 6A 31 91 C3 BF 3D

21:21:46 #28 CDR -1093 File Writer.cpp, Line 301
No seek complete
J: _NEC DVD_RW ND-3500AG

21:21:46 #29 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C

21:21:46 #30 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

21:21:46 #31 Text 0 File DVDR.cpp, Line 6518
Drive: _NEC DVD_RW ND-3500AG
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

21:21:46 #32 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
J: _NEC DVD_RW ND-3500AG

21:22:18 #33 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

21:23:01 #34 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 2.4x (3Â 324 KB/s)

21:23:13 #35 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

21:23:15 #36 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

21:23:15 #37 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Welcome to the forum :slight_smile:

It seems a media issue. What discs are you using?


#3

Phillips DVD+R DL, I’ve notices Verbatim has been metioned as a preferred producer, can the discs bee the problem?


#4

When you have problems burning any DL media that isn’t Verbatim it can be hard to diagnose the problem because those medias are somewhat hit & miss. Some burners will be fine while others will always have problems.

Your best bet is to try with some Verbs & see what result you get. I’d stick with the 2.4x ones to be safe.


#5

I would suggest you burning your DL disc with DVD Decrypter rather Nero.


#6

Deleted for dublication.