Problems Burning Diablo 2 LOD with Alcohol 120%

vbimport

#1

After searching through these foums and geting information on how to burn LOD, I attempted it myself.

I used Securom *NEW as told to read the CD to an image. I did that at 12x speed with no errors. (I tryed at 1x but I just got errors, slowest speed I can burn is at 12x so I desided to read at that speed)

After that I tryed to write the image to a CD useing the Securom *NEW settings once again without changeing anything other then the burn speed to 12x. At about 12% I got an error and the burning stoped. (Clone CD stoped at 12% also when I tryed that befor) I was useing Verbatim DataLifePlus CD-Rs (I just used the last one, next I’ll have to use a Maxell or somet shit) Also the buffer didnt drop so that wasnt the issue.

This is what the log posted. Can someone tell me what I did wrong?

####################### Dumping/Recording Progress Log #######################
17:04:49 Processor info: Intel® Pentium® 4 CPU 2.60GHz x 2 (2600MHz)
17:04:49 Memory Available to Windows: 523,564 KB
17:04:49 Memory Buffer size: 128 MB
17:04:49 Image file loading: C:\Documents and Settings\Owner\Desktop\Place\LOD Copy\EXPANSION.mds
17:04:49 Source Info: Session: 1, Track: 1, Length: 550.1 MB / 062:35:29
17:05:01 (E:) HP DVD Writer 300c(4:0): Recording Method/Speed
17:05:01 Recording - RAW DAO - 12X (1800 KB/Sec)
(E:) HP DVD Writer 300c(4:0): RAW DAO Write Mode - RAW-PW(96)
17:05:05 (E:) HP DVD Writer 300c(4:0): BURN-Free activated
17:05:49 (E:) HP DVD Writer 300c(4:0) - [Write ERROR] LBA: 32496, Length: 16
S:KEY - 03/0C/00 - “Write Error”
17:05:50 (E:) HP DVD Writer 300c(4:0): Recording failed!
17:05:50 Error message: [03/0C/00] - Write Error
17:05:50 (E:) HP DVD Writer 300c(4:0): Recording failed!
17:05:50 Image file loading aborted!
17:05:52 Something is wrong with the recording procedure!
Please check the log file and report any errors to Technical Support.
##############################################################################

The following is the device I used for both read and write:

HP DVD Writer 300c (atapi, Port 4, Bus 0, Target 0, Lun 0)


#2

please send a complete System Report to support_team@alcohol-soft.com then we can look at your problem.


#3

I remember seeing a post about this topic on Daemon Tools forum, and I recall them mentioning that when burning an image of D2 LOD, you must use the old securom feature listed in Alcohol 120%… so instead of using SECUROM NEW* use the SECUROM* option in the pull down menu instead. Hope this helps you, although this reply is 2 years late :doh: haha.


#4

Uhh, yeah. Something tells me he won’t care at this point (especially since he only has one post on this board). Forums need to have an auto-archive after 12 months (or even 6 months) from the last post, where you can’t post in a thread anymore after that time, just view it.


#5

Auto-close after a period may be better so people can still read should they be having the same problem, they just can’t resurrect.