Problems burining with NEC 1100(1300)

Hi,

I recently installad a new graphics card and after that it seems that like I’m unable to burn with my dvd-burner. I have a guess it might be that I don’t have enough power since I also installed a new fan but I’m not sure.

Is there any way to confirm that this is a power issue? I’ve attach the error log from Nero. I also get read errors when I try to copy a disc to another. I’ve tried both Nero and DVD decrypter.

I’m using a NEC 1100 with a 1300 firmware.

Thanks

F R

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 17:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DIS5 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
JLMS XJ-HD166S I: CDRom0
_NEC DVD_RW ND-1300A J: CDRom1
Generic DVD-ROM K: CDRom2

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 143MB (147416kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.12.2005
Burn DVD Image
17:37:09 #1 Text 0 File Reader.cpp, Line 127
Reader running

17:37:09 #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running

17:37:10 #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

17:37:10 #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286007 (508:00.07, 4464MB)

17:37:10 #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

17:37:10 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R

17:37:10 #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:37:10 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286008 (2286008) = #2286008/508:0.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286008 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------

17:37:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681744384, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286008 | lead-out | 1 | 0x41 | 0x00

17:37:14 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

17:37:14 #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

17:37:14 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

17:37:14 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)

17:37:14 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

17:37:14 #15 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x049A0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

17:37:14 #16 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: No

17:50:17 #17 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x033A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x20 0x47 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

17:50:17 #18 CDR -1135 File Writer.cpp, Line 311
Write error

17:50:17 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:50:17 #20 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

17:50:17 #21 SCSI -1135 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

17:50:17 #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5 540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.28a, size=20640 bytes, created 2005-05-31 23:36:01 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-08-03 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Please don’t post serials and try with another branded DVD+R.

Which brand have you used (mediacode)?

Sorry about the serial, I’d remove it but I can’t seem to find the edit post button even thoug it says that I should be able to edut my posts…

I don’t know which mediacode I got. Which is the easist way to find out?

It was too late for editing probably, you can only edit within 30 mins. :wink:

You could use Nero CD DVD Speed or DVDInfoPro or DVDIndentifier to find out the MID.

I’ve now tried to burn a couple of more discs. I actually manged to burn one of them, but the other three became coasters. I’ve attached a dump of the error.

Could it be that my power supply is insufficient? Any guesses?

This is my mediacode.


Unique Disc Identifier : [DVD+R:MCC-003-000]

Disc & Book Type : [DVD+R] - [DVD+R]
Manufacturer Name : [Mitsubishi Chemical Corp.]
Manufacturer ID : [MCC]
Media Type ID : [003]
Product Revision : [Not Specified]
Blank Disc Capacity : [Not Supported By Method 2]
Recording Speeds : [1x-2.4x , 4x , 6x-8x]
[Method 2 Might Not Always Detect All Speeds]

[ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ]


Upodate Nero, try with other media and clean the drive/lens.