Problem with Nero Burning Rom 7

vbimport

#1

I recently tried to copy a video/dvd with Nero Rom 7 using a Memorex DVD -R and got the following error log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0

Recorder: <PLEXTOR DVDR PX-712A> Version: 1.09 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-712A >Version: 1.09 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3200822A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-712A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-712A E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 311MB (318572kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.1.2007
Burn DVD Image
12:13:16 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:13:16 PM #2 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

12:13:16 PM #3 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202769 (489:30.19, 4302MB)

12:13:16 PM #4 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

12:13:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: PLEXTOR DVDR PX-712A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

12:13:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:13:16 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2202770 (2202770) = #2202770/489:30.20
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202620 blocks [E: PLEXTOR DVDR PX-712A]
--------------------------------------------------------------

12:13:16 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: PLEXTOR DVDR PX-712A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4511272960, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2202770 | 2202620 | 0x00
0 | 1 | 1 | 0x41 | 2202770 | 2202620 | 0x00
2202770 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:13:16 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:13:16 PM #10 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 8x (11,080 KB/s)

12:13:17 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:13:17 PM #12 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode

12:13:17 PM #13 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes

12:13:17 PM #14 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

12:13:19 PM #15 Text 0 File Cdrdrv.cpp, Line 1292
12:13:19.140 - E: PLEXTOR DVDR PX-712A : Queue again later

12:19:17 PM #16 SPTI -1093 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 05 EE A0 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 05 E2 10 0A 00 00 00 00 02
Buffer x3184df80: Len x10000
0x00 00 01 BA 44 65 BD A9 2C 81 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 05 21 19 6F 97 49 80 02 00 04
0x00 46 51 0B 77 69 F0 1E 40 E1 DF E5 CB 80 7F E7

12:19:17 PM #17 CDR -1093 File Writer.cpp, Line 299
No seek complete
E: PLEXTOR DVDR PX-712A

12:19:17 PM #18 Text 0 File DVDR.cpp, Line 3434
EndDAO: Last written address was 388767

12:19:18 PM #19 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 8x (11,080 KB/s)

12:19:19 PM #20 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:19:25 PM #21 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

12:19:25 PM #22 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘WNASPINT.DLL’: Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 11/17/2005 10:19:28 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Please edit your post to remove the serial number. Click on the EDIT button and delete. Then, save changes.

Edit: Welcome to CDF and dump the Memorex media. Use quality media such as Verbatim. At the very least, your log shows a medium error indicating your burner does not like Memorex. There may be other issues as well.


#3

Thanks for the info on serial number, how do I edit this? And also thanks for the reply


#4

Did I remove the right number? Thanks


#5

Yes, you did. There are people who would love to steal a serial number, especially if it’s for a premium program (as opposed to an OEM version).

For future issues, it’s also good to check to see if the s/n/ appears in several places as well.


#6

[B]CdRomPeripheral : PLEXTOR DVDR PX-712A atapi Port 1 ID 0 DMA: Off[/B]

Enable DMA perhaps?


#7

Good one nemesis01 - I missed it.

mdcpatsfan: In case you need assistance for DMA, here you go.

http://forum.digital-digest.com/showthread.php?t=61905

Edit Update: There was a recent and interesting discussion regarding DMA. Especially interesting is debro’s statement: “DMA off makes your burner slower than a 90yr old woman with a broken hip”.

http://club.cdfreaks.com/showthread.php?t=205791


#8

In addition to fixing the DMA problem - always the first thing to check btw - I’d suggest dumping those Memorex disks and using something like Verbatim.


#9

hi everyone.new to this. :smiley: .i have a problem with nero burning rom.iam trying to delete it so i can install nero7 ultra.it goes through the deleting process then comes up with a message.
error1316A network error occured while attempting to read from the file c/windows/installer/nero burning rom.msi. how do i delete it.can anyone plz help.
conrod1@xtra.co.nz


#10

@conrodnz

While you can still edit your post , you’ve 30mins after posting, remove your email address as it’s always possible for spammers to pick this up.

You should really have started your own thread as your query is nothing to do with this existing thread.

Edit: I see you’ve already create your own thread.