PROBLEM WITH NERO 7.2.0.3b & AOPEN DVD-WRITER DUW1616L PRO-31

vbimport

#1

Hi.

I have a problem with my recent usage of NERO 7.2.0.3. trial version.

Here is the main specs of my pc:
Pentium III
128 MB SDRAM
Internal Hard Disc partitioned as follows:

  • C drive 19.1GB TOTAL (3GB free space)
  • D drive 19.1GB TOTAL (3GB free space)
    OS WINDOWS XP PROFESSIONAL Service Pack 2
    Internal DVD-Writer AOpen Model DUW1616L PRO-31

I bought the DVD-Writer in FEB 2006 & updated NERO to 7.2.0.3 in APRIL 2006.

I have just started using the internet on this pc this month (MAY 2006). I recently updated my WINDOWS SECURITY via the net.

Since I bought this DVD-Writer, I have had no problems with CD & DVD writing, always using TRACK-AT ONCE writing method.

But the last few times I tried burning CD-Rs (data discs) FAILED. I got messages (or something) during the CD burning such as:

  • Driver not ready message
  • Illegal mode for this track message
  • Illegal Disc
  • Block address

I used THINK QUALITY brand CD-R discs on these 2 counts. The maximum writing speed of these disc is 52x but I can only go up to 48x as this is the max for CD burning on my DVD-Writer.

I enclosed some copies of the NERO LOG for the failure (see below).

I have used THINK QUALITY brand CD-R discs before & they burnt fine at 48x speed.

I know I don’t have that much free disc space but they were of similar size before when my CD burning was OK.

I think this problem happened AFTER I installed NERO 7.2.0.3 but after I did so, the CD-R writing was ok. The CD-R writing problem occured later on.

As for speed, I even tried lowering the speed now down to x4 but still no luck.

I thought that I might have been infected by VIRUS/ANTI-SPYWARE but I see a lot of people in the AOPEN FORUM who bought the DUW1616 model having similar problems.

I’m afraid to UPDATE my firmware as some people in the AOPEN forum said it had no effect or makes it worst.

But then again, I see a lot of people who have other branded DVD Writers having problems with NERO on this forum and other similar forums.

I really don’t want to waste anymore CD-Rs as they can only be used once!

I previously installed several other MEDIA BURNING PROGRAMS since buying the DUW1616L but I have uninstalled those. If there is a DRIVER conflict now, how do I uninstall the DRIVERS for NON-NERO burning software? Which of the free NERO CLEAN TOOLS software should I download & use to do this?

So what is wrong here: the NERO 7 software or the AOPEN DVD Writer or maybe my PC configuration has altered without my knowledge.

I really don’t wanna drag my PC to the local repair shop unless it’s the AOPEN internal DVD writer’s fault.

If you need anymore info about my PC to figure out how to solve my problem, please ask away.

THANK YOU.
………………………………………………………………………………………….
NERO LOG for BLOCK ADDRESS MESSAGE:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:22 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <DVDRW 16X16> Version: PTS2 - HA 1 TA 1 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TEAC CD-W54E >Version: 1.0A - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : IVI Virtual CD 0.5a iviVD Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W54E atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16 atapi Port 2 ID 1 DMA: On

=== CDRom-Device-Map ===
TEAC CD-W54E E: CDRom0
DVDRW 16X16 F: CDRom1
IVI Virtual CD H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
BUFE : 0
Physical memory : 127MB (130600kB)
Free physical memory: 21MB (21624kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.5.2006
CD-ROM (ISO)
10:11:33 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:11:33 PM #2 Text 0 File Burncd.cpp, Line 3068
DVDRW 16X16
Super Link activated

10:11:34 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 23552KB of Memory

10:11:34 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

10:11:34 PM #5 Text 0 File Writer.cpp, Line 113
Writer F: DVDRW 16X16 running

10:11:34 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

10:11:41 PM #7 Text 0 File Burncd.cpp, Line 3365
Turn on Track-At-Once, using CD-R/RW media

10:11:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 357144 ( 79:23.69)

10:11:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

10:11:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: DVDRW 16X16

10:11:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:11:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 357145 (357145) = #357145/79:21.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357143 blocks [F: DVDRW 16X16]
--------------------------------------------------------------

10:11:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: DVDRW 16X16] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 731740160, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
357145 | lead-out | 1 | 0x41 | 0x00

10:11:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 357145 -> 357143.

10:11:42 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:11:42 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:11:42 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 48x (7,200 KB/s)

10:11:43 PM #18 SPTI -1189 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x05380000: Len x4000

10:11:43 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:11:43 PM #20 Text 0 File MMC.cpp, Line 21963
Set BUFE: Super Link -> ON , Adapt writespeed to disc : ON

10:12:04 PM #21 SPTI -1064 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 09 60 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x05b10000: Len x10000
0xC7 41 A4 24 93 43 0A 0D 03 05 86 93 06 AB 80 D8
0x9A 92 93 F2 7A 82 4A FB D1 0A 8F 81 44 00 C0 06
0x18 90 03 A0 18 30 12 C0 3A 21 60 4C 03 69 B6 CA

10:12:04 PM #22 CDR -1064 File Writer.cpp, Line 302
Invalid block address
F: DVDRW 16X16

10:12:04 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:12:05 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:12:05 PM #25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
F: DVDRW 16X16

10:12:05 PM #26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

10:12:05 PM #27 Text 0 File MMC.cpp, Line 16729
<DVDRW 16X16 > start Close Session

10:12:20 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 48x (7,200 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:22 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.18a, size=20576 bytes, created 1/19/2006 7:05:36 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

NERO LOG for DRIVER NOT READY message:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:22 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <DVDRW 16X16> Version: PTS2 - HA 1 TA 1 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TEAC CD-W54E >Version: 1.0A - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : IVI Virtual CD 0.5a iviVD Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W54E atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16 atapi Port 2 ID 1 DMA: On

=== CDRom-Device-Map ===
TEAC CD-W54E E: CDRom0
DVDRW 16X16 F: CDRom1
IVI Virtual CD H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
BUFE : 0
Physical memory : 127MB (130600kB)
Free physical memory: 22MB (23004kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.5.2006
CD-ROM (ISO)
7:09:20 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

7:09:21 PM #2 Text 0 File Burncd.cpp, Line 3068
DVDRW 16X16
Super Link activated

7:09:21 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 23552KB of Memory

7:09:21 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

7:09:21 PM #5 Text 0 File Writer.cpp, Line 113
Writer F: DVDRW 16X16 running

7:09:22 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

7:09:22 PM #7 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using CD-R/RW media

7:09:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 599 ( 0:09.74)

7:09:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

7:09:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: DVDRW 16X16

7:09:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:09:23 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 600 blocks [F: DVDRW 16X16]
--------------------------------------------------------------

7:09:23 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: DVDRW 16X16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
600 | lead-out | 1 | 0x41 | 0x00

7:09:23 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:09:23 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

7:09:23 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (600 KB/s)

7:09:23 PM #17 SPTI -1189 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x053d1a00: Len x4000

7:09:23 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:09:23 PM #19 Text 0 File MMC.cpp, Line 17284
StartDAO : CD-Text - Off

7:09:23 PM #20 Text 0 File MMC.cpp, Line 21963
Set BUFE: Super Link -> ON , Adapt writespeed to disc : ON

7:09:23 PM #21 Text 0 File MMC.cpp, Line 17515
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 00 0a 00

7:11:12 PM #22 SPTI -1033 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 01 80 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01
Buffer x06270000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

7:11:12 PM #23 CDR -1033 File Writer.cpp, Line 302
Drive not ready
F: DVDRW 16X16

7:11:12 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:11:12 PM #25 SPTI -1033 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01

7:11:21 PM #26 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (600 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:22 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.18a, size=20576 bytes, created 1/19/2006 7:05:36 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

NERO LOG for ILLEGAL DISC message:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:22 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <DVDRW 16X16> Version: PTS2 - HA 1 TA 1 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVDRW 16X16 >Version: PTS2 - HA 1 TA 1 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : IVI Virtual CD 0.5a iviVD Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W54E atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16 atapi Port 2 ID 1 DMA: On

=== CDRom-Device-Map ===
TEAC CD-W54E E: CDRom0
DVDRW 16X16 F: CDRom1
IVI Virtual CD H: CDRom2

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
BUFE : 0
Physical memory : 127MB (130600kB)
Free physical memory: 16MB (16604kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.5.2006
CD-ROM (ISO)
2:59:32 AM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:59:33 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 23552KB of Memory

2:59:33 AM #3 Text 0 File Reader.cpp, Line 124
Reader running

2:59:33 AM #4 Text 0 File Writer.cpp, Line 113
Writer F: DVDRW 16X16 running

2:59:33 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

2:59:34 AM #6 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using CD-R/RW media

2:59:35 AM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 356003 ( 79:08.53)

2:59:35 AM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

2:59:35 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: DVDRW 16X16

2:59:35 AM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:59:35 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 356004 (356004) = #356004/79:6.54
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 356004 blocks [F: DVDRW 16X16]
--------------------------------------------------------------

2:59:35 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: DVDRW 16X16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 837674208, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
356004 | lead-out | 1 | 0x41 | 0x00

2:59:35 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

2:59:35 AM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

2:59:35 AM #15 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 48x (7,200 KB/s)

2:59:35 AM #16 SPTI -1189 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x05396200: Len x4000

2:59:35 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:59:35 AM #18 Text 0 File MMC.cpp, Line 17284
StartDAO : CD-Text - Off

2:59:35 AM #19 Text 0 File MMC.cpp, Line 21963
Set BUFE: Super Link -> OFF , Adapt writespeed to disc : ON

2:59:35 AM #20 Text 0 File MMC.cpp, Line 17515
CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 4f 08 36

3:00:03 AM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x2A 00 00 00 0B 49 00 00 1B 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
Buffer x044e0000: Len xf810
0x00 FF FF FF FF FF FF FF FF FF FF 00 00 40 39 02
0x00 00 08 00 00 00 08 00 44 F6 87 9C 47 A3 C2 31
0xFC 71 96 EC 75 D2 9C E3 69 A9 B2 5A 6B BB 1B C9

3:00:03 AM #22 CDR -1046 File Writer.cpp, Line 302
Illegal disc
F: DVDRW 16X16

3:00:03 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:00:03 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:00:04 AM #25 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 48x (7,200 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:22 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.18a, size=20576 bytes, created 1/19/2006 7:05:36 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

NERO LOG for ILLEGAL MODE FOR THIS TRACK message:

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:22 PM

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <DVDRW 16X16> Version: PTS2 - HA 1 TA 1 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TEAC CD-W54E >Version: 1.0A - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : IVI Virtual CD 0.5a iviVD Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W54E atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW 16X16 atapi Port 2 ID 1 DMA: On

=== CDRom-Device-Map ===
TEAC CD-W54E E: CDRom0
DVDRW 16X16 F: CDRom1
IVI Virtual CD H: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
BUFE : 0
Physical memory : 127MB (130600kB)
Free physical memory: 26MB (27308kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.5.2006
CD-ROM (ISO)
7:17:02 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

7:17:02 PM #2 Text 0 File Burncd.cpp, Line 3068
DVDRW 16X16
Super Link activated

7:17:02 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 23552KB of Memory

7:17:02 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

7:17:02 PM #5 Text 0 File Writer.cpp, Line 113
Writer F: DVDRW 16X16 running

7:17:02 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

7:17:03 PM #7 Text 0 File Burncd.cpp, Line 3365
Turn on Track-At-Once, using CD-R/RW media

7:17:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 599 ( 0:09.74)

7:17:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

7:17:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: DVDRW 16X16

7:17:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:17:03 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [F: DVDRW 16X16]
--------------------------------------------------------------

7:17:03 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: DVDRW 16X16] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
600 | lead-out | 1 | 0x41 | 0x00

7:17:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 600 -> 598.

7:17:03 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

7:17:03 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

7:17:03 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (600 KB/s)

7:17:03 PM #18 SPTI -1189 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x05429200: Len x4000

7:17:03 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:17:03 PM #20 Text 0 File MMC.cpp, Line 21963
Set BUFE: Super Link -> ON , Adapt writespeed to disc : ON

7:17:35 PM #21 SPTI -1047 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 64
Buffer x064b0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

7:17:35 PM #22 CDR -1047 File Writer.cpp, Line 302
Illegal mode for this track
F: DVDRW 16X16

7:17:35 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:17:37 PM #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
F: DVDRW 16X16

7:17:37 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

7:17:37 PM #26 Text 0 File MMC.cpp, Line 16729
<DVDRW 16X16 > start Close Session

7:18:59 PM #27 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (600 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:22 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.18a, size=20576 bytes, created 1/19/2006 7:05:36 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)