Problem With Gsa-4167b

Hello Everyone!

I am sure that somebody posted some similar problem before, but it’s just so much stuff to go through in order to find that I will make my own thread.

So I have GSA-4167B. I tried burning an DVD .ISO file of the SUSE Linux
and I couldn’t make it. Both speeds (x4 and x8) give me an error. I attach the
log from both attempts (the x8 try fails almost immidiatelly, while x4 failed by the end). The media I use are TDK DVD-R’s.

Any help would be greatly appreciated!!!

Here are the logs:

X8 Try

-------------->>>> STARTS HERE <<<<-------------
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 2 - 7.0.1.2
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD2500JS-00MHB0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B E: CDRom0
HL-DT-ST CD-RW GCE-8525B F: CDRom1
AXV CD/DVD-ROM CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1014MB (1039084kB)
Free physical memory: 302MB (310248kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.12.2005
Burn DVD Image
6:47:15 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

6:47:15 AM #2 Text 0 File Reader.cpp, Line 124
Reader running

6:47:15 AM #3 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4167B running

6:47:15 AM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

6:47:16 AM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1768683 (393:02.33, 3454MB)

6:47:16 AM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

6:47:16 AM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

6:47:16 AM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:47:16 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1768684 (1768684) = #1768684/393:2.34
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1768684 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

6:47:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3622264832, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1768684 | lead-out | 1 | 0x41 | 0x00

6:47:16 AM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:47:16 AM #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

6:47:16 AM #13 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

6:47:16 AM #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

6:47:16 AM #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11,080 KB/s)

6:47:16 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:47:16 AM #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

6:47:16 AM #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

6:47:16 AM #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

6:47:16 AM #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:47:58 AM #21 SPTI -1064 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0C 21 02
Buffer x04bd0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

6:47:58 AM #22 CDR -1064 File Writer.cpp, Line 302
Invalid block address
E: HL-DT-ST DVDRAM GSA-4167B

6:47:58 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:47:58 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

6:47:58 AM #25 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1

6:48:00 AM #26 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 9/14/2005 2:17:44 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\scsiport.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

-------------->>>> ENDS HERE <<<<-------------

HERE IS THE X4 TRY:

------------->>>> STARTS HERE <<<<-------------
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 2 - 7.0.1.2
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD2500JS-00MHB0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B E: CDRom0
HL-DT-ST CD-RW GCE-8525B F: CDRom1
AXV CD/DVD-ROM CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1014MB (1039084kB)
Free physical memory: 450MB (461416kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.12.2005
Burn DVD Image
12:06:57 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

12:06:57 AM #2 Text 0 File Reader.cpp, Line 124
Reader running

12:06:57 AM #3 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4167B running

12:06:57 AM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

12:06:57 AM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1768683 (393:02.33, 3454MB)

12:06:57 AM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

12:06:57 AM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

12:06:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:06:57 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1768684 (1768684) = #1768684/393:2.34
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1768684 blocks [E: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

12:06:57 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3622264832, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1768684 | lead-out | 1 | 0x41 | 0x00

12:06:57 AM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:06:57 AM #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

12:06:57 AM #13 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

12:06:57 AM #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

12:06:57 AM #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)

12:06:57 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:06:57 AM #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

12:06:57 AM #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

12:06:57 AM #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

12:06:57 AM #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

12:18:05 AM #21 Text 0 File WriterStatus.cpp, Line 116
<E: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 1768684 (1AFCECh), length 0 blocks

12:18:05 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:18:05 AM #23 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1768671

12:18:05 AM #24 CDR -1 File ThreadedTransferInterface.cpp, Line 1937
Unspecified Recorder Error
E: HL-DT-ST DVDRAM GSA-4167B

12:18:05 AM #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once

12:18:05 AM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1

12:18:05 AM #27 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
E: HL-DT-ST DVDRAM GSA-4167B

12:18:05 AM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

12:18:05 AM #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 9/14/2005 2:17:44 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\scsiport.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

SuseLinux and you post Nero xp logs???

No chef, he wasn’t burning using Suse. He was burning an ISO of Suse in what looks like Win2k.

Abes, try some other brand of discs other than TDK 8x DVD-R (TTG02). TTG02 can sometimes be quite variable in quality - one disc burns fine and another coasters so your problems may be entirely due to the disc you are using.

Thanks man, that was a (too) fast shot.

Could you try with ImgBurn, maybe when using simulation mode?
Trying with another media/brand is always a good choice.

Hey guys - im having problems with the GSA 4167b
There is a tracking and focus error everytime Im burning a DVD-RW with the bran IMATION.
For some reason it doesnt write the lead out, and then the problem starts


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘F:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 2:54:32 PM

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL11 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ DVD-ROM GD-5000 >Version: 0210 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160811AS atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ DVD-ROM GD-5000 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : IQ6492S BAN450S 2.0B vaxscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
IQ6492S BAN450S D: CDRom2
COMPAQ DVD-ROM GD-5000 R: CDRom1
HL-DT-ST DVDRAM GSA-4167B W: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 346MB (354592kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.11.2007
ISO compilation
12:40:53 PM #1 Text 0 File Isodoc.cpp, Line 6440
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:40:53 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory

12:40:53 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

12:40:53 PM #4 Text 0 File Writer.cpp, Line 113
Writer W: HL-DT-ST DVDRAM GSA-4167B running

12:40:53 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

12:40:53 PM #6 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media

12:40:54 PM #7 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 358399 ( 79:38.49, 699MB)

12:40:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)

12:40:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD-RW
Disc Manufacturer: CMCW03 -
Disc Application Code: 2, Disc Physical Code: 214

12:40:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:40:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358400 (358400) = #358400/79:38.50
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358400 blocks [W: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

12:40:54 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [W: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 734003200, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 358400 | 0 | 0x00
0 | 1 | 1 | 0x41 | 358400 | 0 | 0x00
358400 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:40:55 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:40:56 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

12:40:56 PM #15 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.

12:40:56 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

12:40:56 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

12:40:56 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:40:56 PM #19 Text 0 File DVDR.cpp, Line 2965
Recording mode: Sequential Recording Mode for Multisession

12:40:56 PM #20 Text 0 File DVDR.cpp, Line 3121
Start write address at LBA 0
DVD high compatibility mode: Yes

12:40:56 PM #21 Text 0 File Cdrdrv.cpp, Line 9096
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Extended Part Version: 1.2 (18)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

12:44:25 PM #22 Text 0 File Cdrdrv.cpp, Line 1230
12:44:25.640 - W: HL-DT-ST DVDRAM GSA-4167B : Queue again later

12:46:58 PM #23 Text 0 File WriterStatus.cpp, Line 116
<W: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 358400 (57800h), length 0 blocks

12:46:58 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:47:58 PM #25 SPTI -1169 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 10 00 00 00 0D 04 08 00 80 EE 4E

12:47:58 PM #26 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was 358415

12:48:04 PM #27 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

12:48:04 PM #28 SPTI -1176 File SCSIPassThrough.cpp, Line 291
W: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 02 00 00 02 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 5B 01 00 0D 72 03

12:48:04 PM #29 CDR -1176 File ThreadedTransferInterface.cpp, Line 1943
Session fixation error
W: HL-DT-ST DVDRAM GSA-4167B

12:48:04 PM #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1943
Could not perform end of Disc-at-once

12:48:04 PM #31 Text 0 File DVDR.cpp, Line 3337
EndDAO: Last written address was -1

12:48:05 PM #32 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
W: HL-DT-ST DVDRAM GSA-4167B

12:48:05 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

12:48:05 PM #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/4/2005 8:03:00 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\InCDfs.SYS’: Ver=5, 1, 0, 15, size=102912 bytes, created 22/8/2006 11:40:46 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 1, 0, 15, size=29568 bytes, created 22/8/2006 11:41:04 AM (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 1, 0, 15, size=9984 bytes, created 22/8/2006 11:41:20 AM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)