Problem with Emprex 16 DVD writer when using Nero 7 backing Hard drive

I have the following problem with Emprex whe I try to back up my Hard Drive using Nero 7. this is the log.txt any Help will be grateful,

01:45:36 PM	Nero BackItUp : 2.0.0.6
01:45:36 PM	[Backup Process]
01:45:36 PM	Microsoft Windows XP
01:45:36 PM	Backup name: Welcome_Local Disk (C)
01:45:36 PM	Created by: Welcome
01:45:36 PM	LOG creation date: 2006/02/23
01:45:36 PM	Full backup operation started.
		Source file: DriveBackupDocBase.cpp, Line: 2067

01:45:36 PM	User selected path list is used
01:45:36 PM	Folders: 0, Files: 0, Data size: 0
01:45:36 PM	Compression: On, Level: 0, Encryption: Off, Verification: On, Virus scan: Off
01:45:36 PM	Backup type: 4, Direct compression: Off, New format backup: On
01:45:36 PM	Source medium type : HDD
01:45:36 PM	Target medium type : Disc
01:45:36 PM	Disk number: 0, Partition number: 0, Drive letter: C:, Drive label: Local Disk (C:)
01:45:36 PM	Actual size: 40015954944, Compress size: 8015195775, Sectors: 78156162, Start sector: 63, End sector: 78156225, Partition type: NTFS
01:45:36 PM	Start using Nero BackItUp own hard disk interfaces for this drive backup!!!
		Source file: DriveBackupDocBase.cpp, Line: 249

01:45:36 PM	Geometry of \\.\PHYSICALDRIVE0, Cylinders: 4865, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0
		Source file: DriveAccessNT.cpp, Line: 183

01:45:38 PM	Error while getting disk geometry of drive: \\.\A:, system error: 21.
		Source file: DriveAccessNT.cpp, Line: 177

01:45:38 PM	Error flushing data, system error: 5.
		Source file: DriveAccessNT.cpp, Line: 214

01:45:38 PM	Geometry of \\.\C:, Cylinders: 4865, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0
		Source file: DriveAccessNT.cpp, Line: 183

01:45:38 PM	Identified hard disk (0) partition (0) as C:\.
		Source file: HDReaderFactory.cpp, Line: 726

01:45:38 PM	Error flushing data, system error: 5.
		Source file: DriveAccessNT.cpp, Line: 214

01:45:38 PM	NT: Flush of drive (\\.\C:) unsuccessfull, System error: (5) Access is denied.
		Source file: HDReaderFactory.cpp, Line: 840

01:45:38 PM	Partition Entry   = 1
01:45:38 PM	Start sector      = 63
01:45:38 PM	Number of sectors = 78156162
01:45:38 PM	Root source       = 0
01:45:38 PM	Number in chain   = 0
01:45:38 PM	Drive letter      = C:\
01:45:38 PM	Partition type    = 0x07
01:45:38 PM	Clean state       = 0
01:45:38 PM	Extended flag     = 0
01:45:38 PM	Partition status  = 0x80
		Source file: HDReaderFactory.cpp, Line: 331

01:45:38 PM	Hard disk: 0. Result: 0. Message: Scanned successfully.
		Source file: HDReaderFactory.cpp, Line: 81

01:45:38 PM	Geometry of \\.\PHYSICALDRIVE0, Cylinders: 4865, MediaType: 12, TracksPerCylinder: 255, SectorsPerTrack: 63, BytesPerSector: 512, Heads: 0
		Source file: DriveAccessNT.cpp, Line: 183

01:45:38 PM	Error flushing data, system error: 5.
		Source file: DriveAccessNT.cpp, Line: 214

01:45:42 PM	Nero BackItUp cannot lock the selected partition/hard disk because it is locked by another program. In this case some of your data will not be backed up. Do you wish to continue without locking?
		Source file: DriveBackupCompilation.cpp, Line: 1136

01:45:45 PM	Space available for backup: 4679401472
		Source file: BackupDocBase.cpp, Line: 3428

01:45:45 PM	Drive backup ini file is not available on disc. A new file will be created.
		Source file: DriveBackupDocBase.cpp, Line: 947

01:45:45 PM	The drive backup process will make the first disc bootable.
		Source file: DriveBackupDocBase.cpp, Line: 1491

01:45:46 PM	Burning speed set by Nero BackItUp: 11080 KB
		Source file: NeroInterfaceImpl.cpp, Line: 1096

01:45:46 PM	Caching of files started
01:45:46 PM	Caching of files completed
01:45:46 PM	Burn process started at 8x (11,080 KB/s)
01:55:02 PM	Burn process completed successfully at 8x (11,080 KB/s)
===================================================================




Windows XP 5.1

IA32

WinAspi: -



NT-SPTI used

Nero API version: 7.0.1.4

Using interface version: 7.0.0.0

Installed in: C:\Program Files\Nero\Nero 7\Nero BackItUp\NeroFiles\

Application: Ahead\Nero BackItUp
Internal Version: 7, 0, 1, 4


Recorder:             <DVDRW IDE 16X>           Version: A188 - HA 1 TA 0 - 7.0.1.4

 Adapter driver:      <IDE>                     HA 1

 Drive buffer  :      2048kB

 Bus Type      :      default (0) -> ATAPI, detected: ?



=== Scsi-Device-Map ===

DiskPeripheral       : WDC WD400BB-00GFA0               atapi Port 0 ID 0  DMA: On 

CdRomPeripheral      : DVDRW IDE 16X                    atapi Port 1 ID 0  DMA: On 

CdRomPeripheral      : LITE-ON LTR-52327S               atapi Port 1 ID 1  DMA: On 



=== CDRom-Device-Map ===

DVDRW IDE 16X              D:   CDRom0

LITE-ON LTR-52327S         E:   CDRom1

=======================



AutoRun : 1

Excluded drive IDs: 

WriteBufferSize: 74448896 (0) Byte

ShowDrvBufStat : 0

BUFE           : 0

Physical memory     : 511MB (523760kB)

Free physical memory: 102MB (104756kB)

Memory in use       : 79 %

Uncached PFiles: 0x0

Use Inquiry    : 1

Global Bus Type: default (0)

Check supported media : Enabled (1) 



23.2.2006

NeroAPI

1:45:46 PM	#1 Text 0 File ThreadedTransfer.cpp, Line 525

	ReadBuffer-Pipe got 262144KB of Memory

	

1:45:46 PM	#2 Text 0 File Reader.cpp, Line 124

	Reader running

	

1:45:46 PM	#3 Text 0 File Writer.cpp, Line 113

	Writer D: DVDRW IDE 16X running

	

1:45:46 PM	#4 Text 0 File AudioCompilationImpl.cpp, Line 842

	DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)

	DRM: Beginning burn process.

	

1:45:46 PM	#5 ISO9660GEN -11 File Geniso.cpp, Line 3312

	First writeable address = 0 (0x00000000)

	

1:45:46 PM	#6 Text 0 File Burncd.cpp, Line 3342

	Turn on Disc-At-Once, using DVD media

	

1:45:46 PM	#7 Text 0 File DlgWaitCD.cpp, Line 279

	Last possible write address on media:  2295103 (510:01.28, 4482MB)

	Last address to be written:            2289311 (508:44.11, 4471MB)

	

1:45:46 PM	#8 Text 0 File DlgWaitCD.cpp, Line 291

	Write in overburning mode: NO

	

1:45:46 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2578

	Recorder: DVDRW IDE 16X, Media type: DVD+R

	 Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0

	 Disc Application Code: 0, Extended Information Indicators: 3

	

1:45:46 PM	#10 Text 0 File DlgWaitCD.cpp, Line 458

	>>> Protocol of DlgWaitCD activities: <<<

	=========================================

	

1:45:46 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847

	Setup items (after recorder preparation)

	 0: TRM_DATA_MODE1 ()

	    2 indices, index0 (150) not provided

	    original disc pos #0 + 2289312 (2289312) = #2289312/508:44.12

	    relocatable, disc pos for caching/writing not required/ required, no patch infos

	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289312 blocks [D: DVDRW IDE 16X]

	--------------------------------------------------------------

	

1:45:46 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059

	Prepare recorder [D: DVDRW IDE 16X] for write in CUE-sheet-DAO

	DAO infos:

	==========

	 MCN: ""

	 TOCType: 0x00; Session Closed, disc fixated

	 Tracks 1 to 1:

	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4688510976, ISRC ""

	DAO layout:

	===========

	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________

	       0 |  lead-in |   0 |    0x41 | 0x00

	       0 |        1 |   0 |    0x41 | 0x00

	       0 |        1 |   1 |    0x41 | 0x00

	 2289312 | lead-out |   1 |    0x41 | 0x00

	

1:45:46 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 36

	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

	

1:45:46 PM	#14 Phase 24 File APIProgress.cpp, Line 278

	Caching of files started

	

1:45:46 PM	#15 Text 0 File Burncd.cpp, Line 4176

	Cache writing successful.

	

1:45:46 PM	#16 Phase 25 File APIProgress.cpp, Line 278

	Caching of files completed

	

1:45:46 PM	#17 Phase 36 File APIProgress.cpp, Line 278

	Burn process started at 8x (11,080 KB/s)

	

1:45:46 PM	#18 SPTI -1066 File SCSIPassThrough.cpp, Line 323

	D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)

	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

	Sense Code: 0x24

	Sense Qual: 0x00

	CDB Data:   0xAD 00 00 00 00 00 00 FF 40 00 00 00 

	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 

	Buffer x03d21600: Len x4000

	

1:45:46 PM	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685

	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

	

1:45:46 PM	#20 Text 0 File Cdrdrv.cpp, Line 8411

	---- DVD Structure: Physical Format Information (00h) ----

	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

	 Book Type: DVD+R   (10), Part Version: 1.0x (1)

	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)

	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable

	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track

	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

	 End Physical Sector Number of Data Area:      26053F h

	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)

	 Data in Burst Cutting Area (BCA) does not exist

	  Disc Application Code: 0 / 0 h

	  Extended Information indicators: 3 h

	  Disc Manufacturer ID: SONY....

	  Media type ID: D11

	  Product revision number: 0

	  Number of Physical format information bytes in use in ADIP up to byte 63: 56

	 Media Specific [16..63]:

	      00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38    ...SONY....D11.8

	      23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B    #T7..2o..j......

	      01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00    ................

	

1:45:46 PM	#21 Text 0 File DVDPlusRW.cpp, Line 666

	Start write address at LBA 0

	DVD high compatibility mode: No

	

1:54:39 PM	#22 Text 0 File WriterStatus.cpp, Line 116

	<D: DVDRW IDE 16X> start writing Lead-Out at LBA 2289312 (22EEA0h), length 0 blocks

	

1:54:39 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 228

	all writers idle, stopping conversion

	

1:55:02 PM	#24 Phase 37 File APIProgress.cpp, Line 278

	Burn process completed successfully at 8x (11,080 KB/s)

	

1:55:03 PM	#25 Text 0 File AudioCompilationImpl.cpp, Line 867

	DRM: DRM burn session terminated.

	

1:55:03 PM	#26 Text 0 File AudioCompilationImpl.cpp, Line 896

	DRM: Closing entire DRM handling. Bye.

	



Existing drivers:



Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 



===================================================================
01:58:07 PM	Please insert the disc to write to...
01:58:39 PM	Please insert the disc to write to...
01:58:39 PM	Space available for backup: 4679401472
		Source file: BackupDocBase.cpp, Line: 3428

01:58:39 PM	Drive backup ini file is not available on disc. A new file will be created.
		Source file: DriveBackupDocBase.cpp, Line: 947

01:58:42 PM	Burning speed set by Nero BackItUp: 11080 KB
		Source file: NeroInterfaceImpl.cpp, Line: 1096

01:58:43 PM	Caching of files started
01:58:43 PM	Caching of files completed
01:58:43 PM	Burn process started at 8x (11,080 KB/s)
02:06:31 PM	Write error
D: DVDRW IDE 16X
02:06:31 PM	Could not perform end of Disc-at-once
02:06:32 PM	Burn process failed at 8x (11,080 KB/s)
===================================================================




Windows XP 5.1

IA32

WinAspi: -



NT-SPTI used

Nero API version: 7.0.1.4

Using interface version: 7.0.0.0

Installed in: C:\Program Files\Nero\Nero 7\Nero BackItUp\NeroFiles\

Application: Ahead\Nero BackItUp
Internal Version: 7, 0, 1, 4


Recorder:             <DVDRW IDE 16X>           Version: A188 - HA 1 TA 0 - 7.0.1.4

 Adapter driver:      <IDE>                     HA 1

 Drive buffer  :      2048kB

 Bus Type      :      default (0) -> ATAPI, detected: ?



=== Scsi-Device-Map ===

DiskPeripheral       : WDC WD400BB-00GFA0               atapi Port 0 ID 0  DMA: On 

CdRomPeripheral      : DVDRW IDE 16X                    atapi Port 1 ID 0  DMA: On 

CdRomPeripheral      : LITE-ON LTR-52327S               atapi Port 1 ID 1  DMA: On 



=== CDRom-Device-Map ===

DVDRW IDE 16X              D:   CDRom0

LITE-ON LTR-52327S         E:   CDRom1

=======================



AutoRun : 1

Excluded drive IDs: 

WriteBufferSize: 74448896 (0) Byte

ShowDrvBufStat : 0

BUFE           : 0

Physical memory     : 511MB (523760kB)

Free physical memory: 101MB (104180kB)

Memory in use       : 80 %

Uncached PFiles: 0x0

Use Inquiry    : 1

Global Bus Type: default (0)

Check supported media : Enabled (1) 



23.2.2006

NeroAPI

1:58:42 PM	#1 Text 0 File ThreadedTransfer.cpp, Line 525

	ReadBuffer-Pipe got 262144KB of Memory

	

1:58:42 PM	#2 Text 0 File Reader.cpp, Line 124

	Reader running

	

1:58:42 PM	#3 Text 0 File Writer.cpp, Line 113

	Writer D: DVDRW IDE 16X running

	

1:58:42 PM	#4 Text 0 File AudioCompilationImpl.cpp, Line 842

	DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)

	DRM: Beginning burn process.

	

1:58:42 PM	#5 ISO9660GEN -11 File Geniso.cpp, Line 3312

	First writeable address = 0 (0x00000000)

	

1:58:42 PM	#6 Text 0 File Burncd.cpp, Line 3342

	Turn on Disc-At-Once, using DVD media

	

1:58:43 PM	#7 Text 0 File DlgWaitCD.cpp, Line 279

	Last possible write address on media:  2295103 (510:01.28, 4482MB)

	Last address to be written:            1630271 (362:16.71, 3184MB)

	

1:58:43 PM	#8 Text 0 File DlgWaitCD.cpp, Line 291

	Write in overburning mode: NO

	

1:58:43 PM	#9 Text 0 File DlgWaitCD.cpp, Line 2578

	Recorder: DVDRW IDE 16X, Media type: DVD+R

	 Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0

	 Disc Application Code: 0, Extended Information Indicators: 3

	

1:58:43 PM	#10 Text 0 File DlgWaitCD.cpp, Line 458

	>>> Protocol of DlgWaitCD activities: <<<

	=========================================

	

1:58:43 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847

	Setup items (after recorder preparation)

	 0: TRM_DATA_MODE1 ()

	    2 indices, index0 (150) not provided

	    original disc pos #0 + 1630272 (1630272) = #1630272/362:16.72

	    relocatable, disc pos for caching/writing not required/ required, no patch infos

	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1630272 blocks [D: DVDRW IDE 16X]

	--------------------------------------------------------------

	

1:58:43 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059

	Prepare recorder [D: DVDRW IDE 16X] for write in CUE-sheet-DAO

	DAO infos:

	==========

	 MCN: ""

	 TOCType: 0x00; Session Closed, disc not fixated

	 Tracks 1 to 1:

	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3338797056, ISRC ""

	DAO layout:

	===========

	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________

	       0 |  lead-in |   0 |    0x41 | 0x00

	       0 |        1 |   0 |    0x41 | 0x00

	       0 |        1 |   1 |    0x41 | 0x00

	 1630272 | lead-out |   1 |    0x41 | 0x00

	

1:58:43 PM	#13 Text 0 File SCSIPassThrough.cpp, Line 36

	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

	

1:58:43 PM	#14 Phase 24 File APIProgress.cpp, Line 278

	Caching of files started

	

1:58:43 PM	#15 Text 0 File Burncd.cpp, Line 4176

	Cache writing successful.

	

1:58:43 PM	#16 Phase 25 File APIProgress.cpp, Line 278

	Caching of files completed

	

1:58:43 PM	#17 Phase 36 File APIProgress.cpp, Line 278

	Burn process started at 8x (11,080 KB/s)

	

1:58:43 PM	#18 SPTI -1066 File SCSIPassThrough.cpp, Line 323

	D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)

	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)

	Sense Code: 0x24

	Sense Qual: 0x00

	CDB Data:   0xAD 00 00 00 00 00 00 FF 40 00 00 00 

	Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 

	Buffer x03d18e00: Len x4000

	

1:58:43 PM	#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685

	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

	

1:58:43 PM	#20 Text 0 File Cdrdrv.cpp, Line 8411

	---- DVD Structure: Physical Format Information (00h) ----

	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

	 Book Type: DVD+R   (10), Part Version: 1.0x (1)

	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)

	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable

	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track

	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

	 End Physical Sector Number of Data Area:      26053F h

	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)

	 Data in Burst Cutting Area (BCA) does not exist

	  Disc Application Code: 0 / 0 h

	  Extended Information indicators: 3 h

	  Disc Manufacturer ID: SONY....

	  Media type ID: D11

	  Product revision number: 0

	  Number of Physical format information bytes in use in ADIP up to byte 63: 56

	 Media Specific [16..63]:

	      00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38    ...SONY....D11.8

	      23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B    #T7..2o..j......

	      01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00    ................

	

1:58:43 PM	#21 Text 0 File DVDPlusRW.cpp, Line 666

	Start write address at LBA 0

	DVD high compatibility mode: No

	

2:05:51 PM	#22 Text 0 File WriterStatus.cpp, Line 116

	<D: DVDRW IDE 16X> start writing Lead-Out at LBA 1630272 (18E040h), length 0 blocks

	

2:05:51 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 228

	all writers idle, stopping conversion

	

2:06:13 PM	#24 SPTI -1135 File SCSIPassThrough.cpp, Line 323

	D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)

	Sense Key:  0x03 (KEY_MEDIUM_ERROR)

	Sense Code: 0x0C

	Sense Qual: 0x00

	CDB Data:   0x51 00 00 00 00 00 00 00 20 00 00 00 

	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 

	Buffer x01dca200: Len x20

	

2:06:13 PM	#25 CDR -1135 File ThreadedTransferInterface.cpp, Line 1937

	Write error

	D: DVDRW IDE 16X

	

2:06:13 PM	#26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937

	Could not perform end of Disc-at-once

	

2:06:31 PM	#27 Phase 38 File APIProgress.cpp, Line 278

	Burn process failed at 8x (11,080 KB/s)

	

2:06:32 PM	#28 Text 0 File AudioCompilationImpl.cpp, Line 867

	DRM: DRM burn session terminated.

	

2:06:32 PM	#29 Text 0 File AudioCompilationImpl.cpp, Line 896

	DRM: Closing entire DRM handling. Bye.

	

2:07:06 PM	#30 SPTI -1080 File SCSIPassThrough.cpp, Line 323

	D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

	Sense Key:  0x02 (KEY_NOT_READY)

	Sense Code: 0x3A

	Sense Qual: 0x00

	CDB Data:   0x95 00 00 00 00 00 00 00 00 00 00 44 

	Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 

	Buffer x01dc5800: Len x4

	



Existing drivers:



Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 



===================================================================
02:07:06 PM	BurnOnDisc returned false!!!
		Source file: DriveBackupDocBase.cpp, Line: 1741

02:07:06 PM	Error flushing data, system error: 5.
		Source file: DriveAccessNT.cpp, Line: 214

02:07:06 PM	Backup process failed.
		Source file: DriveBackupDocBase.cpp, Line: 398

The drive should work perfectly with a more recent version of NERO.