Problem with copied DVD

vbimport

#1

Hi everyone,

I’m trying to create a copy of a copied DVD that I did (to save on re-encoding it).

However, when I use either Explorer or DVD Decrpyter to copy the files, some of them will not copy, with multiple retries, or just failing to copy. However the file plays correctly both thorough my dvd player and when accessed directly.

I have the BTC 1004 with FW 0250,and used DVD Decrypter to get the files originally, and Nero Recode (2.0.0.18) to recode and burn the dvd.

Edit: The dvds i am using are the G04’s

Why is this happening, and is there anything i can do to stop it happening an correctly copy the files?

Many thanks

Richard


#2

What drive are you trying to read the source disk from? The BTC drive can usually read just about anything you put in it. If you are using a different dvd drive, try to rip it with the BTC drive.


#3

I have tried to read the disc with both the BTC and my other DVD ROM drive (just a generic one), and both of them have the same problem


#4

It’s been my experience that if the BTC can’t read it nothing can. You said your dvd player can read it fine so I’m at a loss?


#5

have you also tried other software?? clonedvd, nero??
what happens when you try to copy the movie on the fly??
is the dvd you trying to copy protected ???
do you have the same problems with original dvd´s???


#6

Can any one help ?
i update my BTC 1004 from firmware 0350 to 0450 and start to have this problem ,
Could not perform end of Disc-at-once on the Maxell 4x dvd-r , i have no problem at all the all the previous older firmware, can you go back to 0350 from 0450, any suggeston to fix ??
Best Regard


#7

Can any one help ?
i update my BTC 1004 from firmware 0350 to 0450 and start to have this problem ,
Could not perform end of Disc-at-once on the Maxell 4x dvd-r , i have no problem at all the all the previous older firmware, can you go back to 0350 from 0450, any suggeston to fix ??
Best Regard

here is the error log file form nero

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.15
Recorder: <DVDRW IDE1004> Version: 0450 - HA 0 TA 1 - 6.3.1.15
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI DVD DUAL 8X4X12 >Version: B3IC - HA 0 TA 0 - 6.3.1.15
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : ATAPI DVD DUAL 8X4X12 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 0 ID 1 DMA: On
DiskPeripheral : FUJITSU MPF3204AH atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD DUAL 8X4X12 D: CDRom0
DVDRW IDE1004 E: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 110MB (113208kB)
Free physical memory: 24MB (24968kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.6.2004
DVD-Copy on the fly
1:40:05 AM #1 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A55000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

1:40:15 AM #2 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A55000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

1:40:16 AM #3 Text 0 File Reader.cpp, Line 118
Reader running

1:40:16 AM #4 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE1004 running

1:40:17 AM #5 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1748160 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

1:40:17 AM #6 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 1748160 = 1748160, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

1:40:17 AM #7 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

1:40:20 AM #8 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1748159 (388:28.59, 3414MB)

1:40:20 AM #9 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

1:40:20 AM #10 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: TYG01 -
Disc Application Code: 64, Disc Physical Code: 193

1:40:20 AM #11 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:40:20 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1748160 (1748160) = #1748160/388:28.60
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1748160 blocks [DVDRW IDE1004 ]
--------------------------------------------------------------

1:40:21 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [DVDRW IDE1004 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3580231680, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1748160 | lead-out | 1 | 0x00 | 0x41

1:40:21 AM #14 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 4x (5,540 KB/s)

1:40:23 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

1:40:24 AM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 10:56,067 (656067ms) -> OK

1:40:24 AM #17 Text 0 File DVDR.cpp, Line 1840
Recording mode: Sequential Recording Mode for Multisession

1:40:24 AM #18 Text 0 File Mmc.cpp, Line 20239
Set BUFE: Super Link -> ON

1:40:24 AM #19 Text 0 File DVDR.cpp, Line 1981
Start write address at LBA 0
DVD high compatibility mode: Yes

1:40:24 AM #20 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

1:40:25 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A55000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

1:40:37 AM #22 Text 0 File Cdrdrv.cpp, Line 1294
01:40:37.629 - DVDRW IDE1004\H0 T1 : Queue again later

1:52:48 AM #23 Text 0 File WriterStatus.cpp, Line 115
<DVDRW IDE1004 > start writing Lead-Out at LBA 1748160 (1AACC0h), lenght 0 blocks

1:52:48 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:52:48 AM #25 Text 0 File DVDR.cpp, Line 2215
EndDAO: Last written address was 1748159

1:52:50 AM #26 Phase 133 File dlgbrnst.cpp, Line 1845
Writing short lead-out

1:53:02 AM #27 SCSI -1135 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

1:53:02 AM #28 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A55000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

1:53:02 AM #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

1:53:02 AM #30 CDR -1135 File ThreadedTransferInterface.cpp, Line 1707
Write error
DVDRW IDE1004\H0 T1

1:53:02 AM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1707
Could not perform end of Disc-at-once

1:53:02 AM #32 Text 0 File DVDR.cpp, Line 2215
EndDAO: Last written address was -1

1:53:02 AM #33 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03A55000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

1:53:02 AM #34 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

1:53:02 AM #35 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

1:53:02 AM #36 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\CDUDF.SYS’: Ver=6.1.1.7 , size=263200 bytes, created 6/25/2003 12:18:46 AM
File ‘Drivers\CDR4_2K.SYS’: Ver=6.2.0.110 , size=62704 bytes, created 4/12/2004 6:00:32 PM
File ‘Drivers\CDRALW2K.SYS’: Ver=6.2.0.110 , size=24698 bytes, created 4/12/2004 6:00:31 PM
File ‘Drivers\atapi.sys’: Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 12:05:04 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#8

when have no problems with the previos fw i would go back, in 0450 are only medias added. if you do not need the support for this medias it´s no problem to go back.

is this --> DiskPeripheral : FUJITSU MPF3204AH atapi Port 1 ID 0 DMA: Off your HD? why have you disabled the DMA mode, this could also cause your prob.

nero 6.3.1.15 can also be your problem, it looks like that it´s buggy
http://club.cdfreaks.com/showthread.php?p=614605#post614605


#9

I tried to do a disc copy using Nero (not on the fly though, so i could use the BTC to read the disc), but it failed at the 75% mark (which would equate to where it failed using explorer and decrypter).
The disc isnt copy protected, and creating the copy from the original was fine, its just that i had to reencode it to get it below 4.7GB

Below is the error log nero produced if thats any help

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 21/12/2003 04:26:59
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero version: 6.3.1.15
Recorder: <DVDRW IDE1004> Version: 0250 - HA 1 TA 1 - 6.3.1.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE1004 >Version: 0250 - HA 1 TA 1 - 6.3.1.15
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340810A atapi Port 0 ID 0 DMA: On
DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
IDE DVD-ROM 16X H: CDRom0
DVDRW IDE1004 G: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 176MB (180932kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.6.2004
===== Disc-Copy over image - 1st step : Copy to image …

11:07:39 #1 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x033F5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

11:07:40 #2 Text 0 File Reader.cpp, Line 118
Reader running

11:07:40 #3 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

11:07:40 #4 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2287088 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

11:07:40 #5 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2287088 = 2287088, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

11:07:40 #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

11:07:40 #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2287087 (508:14.37, 4466MB)

11:07:40 #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

11:07:40 #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

11:07:40 #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:07:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2287088 (2287088) = #2287088/508:14.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287088 blocks [ Image Recorder ]
--------------------------------------------------------------

11:07:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4684263424, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287088 | lead-out | 1 | 0x00 | 0x41

11:07:40 #13 Phase 120 File dlgbrnst.cpp, Line 1845
Creating the image for burning

11:07:40 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:18:08 #15 SCSI -1047 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03981000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1A 0x06 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

11:18:12 #16 SCSI -1047 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03981000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1A 0x06 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

11:18:12 #17 TRANSFER -25 File Reader.cpp, Line 371
Error reading data

11:18:13 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:18:15 #19 Phase 67 File dlgbrnst.cpp, Line 1845
Burn process failed

===== Disc-Copy over image - 2nd step : Burn the image …

11:07:39 #1 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x033F5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

11:07:40 #2 Text 0 File Reader.cpp, Line 118
Reader running

11:07:40 #3 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

11:07:40 #4 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2287088 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

11:07:40 #5 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2287088 = 2287088, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

11:07:40 #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using DVD media

11:07:40 #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2287087 (508:14.37, 4466MB)

11:07:40 #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

11:07:40 #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

11:07:40 #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:07:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2287088 (2287088) = #2287088/508:14.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287088 blocks [ Image Recorder ]
--------------------------------------------------------------

11:07:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4684263424, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287088 | lead-out | 1 | 0x00 | 0x41

11:07:40 #13 Phase 120 File dlgbrnst.cpp, Line 1845
Creating the image for burning

11:07:40 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:18:08 #15 SCSI -1047 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03981000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1A 0x06 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

11:18:12 #16 SCSI -1047 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03981000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1A 0x06 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

11:18:12 #17 TRANSFER -25 File Reader.cpp, Line 371
Error reading data

11:18:13 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:18:15 #19 Phase 67 File dlgbrnst.cpp, Line 1845
Burn process failed

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21/12/2003 04:26:58
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Hope you can help
Thanks
Richard


#10

i went back to firmware 0350 and nero 6.3.0.6 and every thing back to normal, i think the nero 6.3.15 is the one the mess up with the -R format with to the 1004, try to write book type to the -r disk.