Problem w/CDRW & XP

I have a Lite-On 321224s which is recognized by Windows XP. However, the drive which is on the Master slot of the secondary IDE channel shows 0(0) in the Device Manager.

It should read 1(1).

Nero can read and burn the drive correctly.

Because of this, WinMktFlash can’t find the drive and I have problems when there are other drives on the system such as a Virtural drive.

Any suggestions or advice?

Thanks;

Stan

my secondary master drive says Location 0 (0).

Mine says 0 (0) too. If MTK WiNflash can’t find the drive in ATAPI mode, then use Direct IDE Port mode.

My systems show 0(0) on secondary master as well. :slight_smile: